Kohler K1219LA96 User Manual

HOURGLASS®32

Features

Acrylic

•

Integral apron

•

Integral tile ﬂange

•

Left or right drain

•

Alcove installation

•

Textured bottom surface

• 60″ (152.4 cm) x 32″ (81.3 cm) x 20″ (50.8 cm)

•

Codes/Standards Applicable

Speciﬁed model meets or exceeds the following:

ANSI Z124.1.2

•

IAPMO/UPC

•

Speciﬁed Model

K-1219-LA

ALSO K-1219-RA

Colors/Finishes

0: White

•

Other: Refer to Price Book for additional colors/ﬁnishes

•

Accessories

CP: Polished Chrome

•

SH: Bright Silver

•

BATH

Model Description Colors/Finishes

K-1219-LA Integral apron and integral tile ﬂange, left drain (shown) ❑ 0 ❑ Other_____ K-1219-RA Integral apron and integral tile ﬂange, right drain ❑ 0 ❑ Other_____

Recommended Accessories

K-7161-AF Bath drain – for above or through-the-ﬂoor installation ❑ CP ❑ Other_____

Optional Accessories

K-1278 Removable apron ❑ 0 ❑ Other_____ K-1491 Removable pillow ❑ 0 ❑ Other_____ K-1601 Footstop ❑ 0 ❑ Other_____

Product Speciﬁcation:

The acrylic bath shall with integral apron shall be 60″ (152.4 cm) in length, 32″ (81.3 cm) in width, and 20″ (50.8 cm) in height. Bath shall have a left or right drain. Bath shall feature an integral tile ﬂange and textured bottom surface. Bath shall be for alcove installations. Bath shall be Kohler Model K-1219-____-____.

Page 1 of 2 089399-4-

USA: 1-800-4-KOHLER

Canada: 1-800-964-5590

kohler.com

HOURGLASS®32

Technical Information

Fixture*: Basin area Basin area bottom 47″ (119.4 cm) x 20″ (50.8 cm) Basin area top 53″ (134.6 cm) x 23″ (58.4 cm) Weight 80 lbs (36.3 kg) To overﬂow Water depth 14-1/2″ (36.8 cm) Capacity 64 gal (242.3 L) * Approximate measurements for comparison only.

Installation Notes

Install this product according to the installation guide.

Floor support under this product must provide for a minimum of 48 lbs/square foot (234 kg/square meter) loading.

The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.

Rim-mount faucet installations: Before drilling the mounting holes, ensure the faucet does not interfere with the drain overﬂow and circulating system.

Deck-mount spout installations: Consult local and national codes for minimum air gap requirements.

16" (40.6 cm)

1-11/16" (4.3 cm)

1-1/4" (3.2 cm)

3" (7.6 cm)

8-11/16" (22.1 cm)

2-7/8" (7.3 cm)

1-1/2" OD

60" (152.4 cm)

1" (2.5 cm)

(7.6 cm)

No change in measurements if connected with drain illustrated.

1-1/4" (3.2 cm)

32" (81.3 cm)

1/2"

(1.3 cm) R. 20" (50.8 cm)

Integral Flange Detail

HOURGLASS®32 BATH Page2of2

089399-4-

Product Diagram