Kohler K1162H47 User Manual
SUNWARD
®
Features
Acrylic
•
Oval shape
•
Drop-in
•
6 individually adjustable ProFlex
•
Pump with air switch and grounding-type plug-in cord
•
In-line heater
•
Molded lumbar supports and armrests
•
Optional K-9696 whirlpool trim kit in various finishes
•
Textured bottom surface
•
60″ (152.4 cm) x 42″ (106.7 cm) x 21″ (53.3 cm)
•
hydro-massage jets
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
•
ASME A112.19.7
•
UL 1795
•
ASTM E162
•
ASTM E662
•
Specified Model
BATH WHIRLPOOL WITH HEATER
K-1162-H
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1162-H Bath whirlpool with heater ❑ 0 ❑ Other_____
Recommended Accessories
K-7213 Clearflo bath cable drain with PVC tubing ❑ CP ❑ Other_____
K-7214 Clearflo bath cable drain without PVC tubing ❑ CP ❑ Other_____
K-11677 Adjustable trip lever drain ❑ CP ❑ PB
Optional Accessories
K-9696 Jet trim kit (metal finishes) ❑ 0 ❑ CP ❑ Other_____
Product Specification
The drop-in oval shaped bath whirlpool shall be made of acrylic. Product shall be 60” (152.4 cm) in length, 42″ (106.7 cm) in
width, and 21″ (53.3 cm) in height. Product shall have 6 individually adjustable ProFlex hydro-massage jets, a pump with air
switch and grounding-type plug-in cord, and an in-line heater. Product shall have a textured bottom surface and molded lumbar
supports and armrests. Product shall have optional K-9696 whirlpool trim kit in various finishes. Bath whirlpool shall be Kohler
Model K-1162-H-_______.
Page 1 of 2
1041934-4-
E
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
SUNWARD
®
Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
Basin area, top 53-1/2″ (135.9 cm) x 32-1/8″ (81.6 cm)
Weight 110 lbs (50 kg)
To overflow:
Water depth 15″ (38.1 cm)
Capacity 57 gal (215.9 L)
* Approximate measurements for comparison only.
Included components:
Cut-out template 1042556-7
Pump: V Hz A
1-speed 120 60 7.5
Heater: kW V Hz A
Minimum access panel pump/control:
43″ (109.2 cm) x 21-9/16″ (54.8 cm)
1.5 120 60 12.5
20″ (50.8 cm) W x 15″ (38.1 cm) H required
Required Electrical Service
Two dedicated circuits are required, each protected with
a Class A Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Locate the outlets behind the whirlpool and within 24”
(61 cm) of the pump and heater.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
35 lbs/square foot (170 kg/square meter) loading.
The suction line extends 4-5/8″ (11.7 cm) beyond the edge of
the rim. The pump base extends 1/8″ (3.3 mm) beyond the
edge of the rim. Modify the framing as needed.
21"
(53.3 cm)
3-1/8"
(7.9 cm)
3-1/2"
(8.9 cm)
10-13/16" (27.5 cm)
60" (152.4 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
4-5/8" (11.7 cm)
3/8" (1 cm)
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
Pump/Control
Access
21"
(53.3 cm)
19-1/2"
(49.5 cm)
Recommended faucet area
1-1/2"
(3.8 cm)
Drop-In Rim Detail
42" (106.7 cm)
1-1/2" OD
Product Diagram
SUNWARD®BATH WHIRLPOOL WITH HEATER
Page2of2
1041934-4-
E
Loading...