Kohler K1159R96 User Manual
PROFLEX®7236
Features
Acrylic
•
Drop-in or three-wall alcove
•
Molded lumbar supports and armrests
•
Optional K-1491 removable bath pillow
•
Optional K-1283 separate apron
•
Optional K-1601 footstop
•
72″ (1829 mm) x 36″ (914 mm) x 20-1/8″ (511 mm)
•
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
•
Specified Model
ACRYLIC BATH
K-1159
ALSO K-1159-L/-R
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1159 Bath, drop-in (shown) ❑ 0 ❑ Other_____
K-1159-L Bath, left drain, tile flange ❑ 0 ❑ Other_____
K-1159-R Bath, right drain, tile flange ❑ 0 ❑ Other_____
Recommended Accessories
K-7213 Cable drain with PVC tubing OR ❑ CP ❑ Other_____
K-7214 Cable drain without PVC tubing OR ❑ CP ❑ Other_____
K-11677 Trip lever drain ❑ CP ❑ PB
Product Specification
The acrylic bath shall be 72″ (1829 mm) in length, 36″ (914 mm) in width, and 20-1/8″ (511 mm) in height. Bath shall be for
drop-in or 3-wall alcove installation. Bath shall have molded lumbar supports and armrests. Bath shall have an optional K-1283
separate apron, an optional K-1491 removable pillow, and an K-1601 Footstop. Bath shall be Kohler Model
K-1159-______-_______.
Page 1 of 2
1003691-4-
E
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
PROFLEX®7236
Optional Accessories
K-1283 Separate apron with removable panel for front access ❑ 0 ❑ Other_____
K-1491 Pillow ❑ 0 ❑ Other_____
K-1601 Footstop ❑ 0 ❑ Other_____
Technical Information
Fixture*:
Basin area:
Bathing well 55″ (1397 mm) x 21″ (533 mm)
Top area 65″ (1651 mm) x 26″ (660 mm)
To overflow:
Water depth 15″ (381 mm)
Capacity 72 gal (272.5 L)
Weight 52 lbs (23.6 kg)
Drop-in cut-out 70-1/2″ (1791 mm) x 34-1/2″ (876 mm)
* Approximate measurements for comparison only.
18"
(457 mm)
Installation Notes
Install this product according to the installation guide.
Floor support under bath must provide for a minimum of
38 lbs/square foot (184 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
No change in measurements if connected with drain
illustrated. (K-11677 or K-11677M)
1"
(25 mm)
8-1/2"
(216 mm)
72" (1829 mm)
2-1/2"
(64 mm)
2-7/8"
3"
(73 mm)
(76 mm)
PROFLEX®7236 ACRYLIC BATH
Page2of2
1003691-4-
E
1/4" (6 mm)
Product Diagram
20-1/8"
(511 mm)
1-1/4"
(32 mm)
Tile Flange
Detail
36" (914 mm)
1-1/2"
(38 mm)
18-5/8"
(473 mm)
Drop-In Rim
Detail
1-1/2" OD
Loading...