Kohler K1158H296 Specifications

Roughing-In

K-1158-H2

BANCROFT

TM 5.5’

BATH WHIRLPOOL

Product Information

Applicable product:
Bath whirlpool K-1158-H2

Fixture*:
Bathing well:
Basin area,

bottom
Basin area, top 57″ (144 .8 cm) x 34″ (86.4 cm)
Weight 130 lbs 59 kg)
To overflow:
Water depth 16″ (40.6 cm)
Capacity 95 gal (359.6 L)
* Approximate measurements for comparison only.

Included component:
Cut-out template 1043292-7

Pump Heater V Hz A

Minimum access panel:
Pump/ control 34″ (86.4 cm) W

46″ (116.8 cm) x 30″ (76.2 cm)

1.5 kW 240 50/60 11

required

x15″ (38.1 cm) H

Required Electrical Service

Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):

Pump/control 220-240 V, 20 A, 50/60 Hz

Installation Notes

Install this product according to the installation guide.

Floor support under whirlpool must provide for a minimum of
50 lbs/square foot (242.3 kg/square meter).

Hot water supply should be 70% of capacity or greater.
Installations will vary.

This bath is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.

A minimum access panel is required.

Fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.

No change in measurements if connected
with drain illustrated.

2"

41-3/4" (106 cm)

(K-7161-AF)

(5.1 cm)

BANCROFTTM 5.5’ BATH WHIRLPOOL
1043845-1-

B

Pump/Control Access

22"

(55.9 cm)

65-7/8" (167.3 cm)

1" (2.5 cm)

20-7/8"
(53 cm)

2-1/4"
(5.7 cm)

11-1/4" (28.6 cm)

2-3/4"
(7 cm)

1-1/2" OD

2-7/8"
(7.3 cm)