Kohler K1158H296 User Manual
BANCROFTTM 5.5’
Features
Acrylic
•
Variable-speed pump with 1.5 kW heater, back-lit
•
user keypad, and remote control
8 Flexjets
•
Less all trim
•
66″ (167.6 cm) x 42″ (106.7 cm) x 22″ (55.9 cm)
•
TM
Codes/Standards Applicable
Specified model meets or exceeds the following:
ANSI Z124.1.2
•
ASME A112.19.7M
•
UL 1795
•
Specified Model
BATH WHIRLPOOL
K-1158-H2
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1158-H2 Bath whirlpool ❑ 0 ❑ Other_____
Required Accessories
K-9698 Jet trim kit ❑ CP ❑ Other_____
Recommended Accessories
K-7161-AF Adjustable pop-up drain ❑ CP ❑ Other_____
Optional Accessories
K-1491 Pillow ❑ 0 ❑ Other_____
K-1601 Footstop ❑ 0 ❑ Other_____
K-1703 Remote control ❑ NA
K-9497 2.5″ (6.4 cm) metal finish keypad trim ❑ CP ❑ Other_____
Product Specification
The acrylic bath whirlpool shall be 66″ (167.6 cm) in length, 42″ (106.7 cm) in width, and 22″ (55.9 cm) in height. Bath whirlpool
shall have 8 Flexjets, variable speed pump with 1.5 kW heater, and back-lit user control. Bath whirlpool shall be less all trim.
Bath whirlpool shall be Kohler Model K-1158-H2-_______.
Page 1 of 2
1043845-4-
USA: 1-800-4-KOHLER
B
Canada: 1-800-964-5590
kohler.com
BANCROFTTM 5.5’
Technical Information
Fixture*:
Bathing well:
Basin area,
bottom
Basin area, top 57″ (144 .8 cm) x 34″ (86.4 cm)
Weight 130 lbs 59 kg)
To overflow:
Water depth 16″ (40.6 cm)
Capacity 95 gal (359.6 L)
* Approximate measurements for comparison only.
Included component:
Cut-out template 1043292-7
Pump Heater V Hz A
Minimum access panel (required):
Pump/ control 34″ (86.4 cm) W
46″ (116.8 cm) x 30″ (76.2 cm)
1.5 kW 240 50/60 11
x15″ (38.1 cm) H
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Pump/control 220-240 V, 20 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
50 lbs/square foot (242.3 kg/square meter).
Hot water supply should be 70% of capacity or greater.
Installations will vary.
This bath is designed for drop-in installation only. It is not
suited for use in a three-wall alcove with an overhead shower.
A minimum access panel is required.
No change in measurements if connected
with drain illustrated.
2"
41-3/4" (106 cm)
(K-7161-AF)
(5.1 cm)
Pump/Control Access
22"
(55.9 cm)
Product Diagram
65-7/8" (167.3 cm)
1" (2.5 cm)
20-7/8"
(53 cm)
2-1/4"
(5.7 cm)
11-1/4" (28.6 cm)
2-3/4"
(7 cm)
1-1/2" OD
2-7/8"
(7.3 cm)
BANCROFTTM 5.5’ BATH WHIRLPOOL
Page2of2
1043845-4-
B
Loading...