Kohler K1157CN0 User Manual
PROFLEX®7236
Features
Acrylic
•
Pump with air switch and grounding-type plug-in cord
•
6 individually adjustable ProFlex
•
Custom pump locations
•
Drop-in
•
Molded lumbar supports and armrests
•
Optional K-1283 removable apron
•
Optional K-9696 whirlpool trim kit in various finishes
•
72″ (1829 mm) x 36″ (914 mm) x 20-1/8″ (511 mm)
•
hydro-massage jets
®
Codes/Standards Applicable
Specified model meets or exceeds the following:
ASME A112.19.7
•
ANSI Z124.1.2
•
UL 1795
•
ASTM E162
•
ASTM E662
•
Specified Model
CUSTOM BATH WHIRLPOOL
K-1157-CN
Colors/Finishes
0: White
•
Other: Refer to Price Book for additional colors/finishes
•
Accessories
0: White
•
CP: Polished Chrome
•
PB: Vibrant®Polished Brass
•
Other: Refer to Price Book for additional colors/finishes
•
Model Description Colors/Finishes
K-1157-CN Custom bath whirlpool – drop-in ❑ 0 ❑ Other_____
Recommended Accessories
K-7213 Clearflo bath cable drain with PVC tubing ❑ CP ❑ Other_____
K-7214 Clearflo bath cable drain without PVC tubing ❑ CP ❑ Other_____
K-11677 Adjustable trip lever bath drain ❑ CP ❑ PB
Optional Accessories
K-1283 Removable apron ❑ 0 ❑ Other_____
K-1491 Pillow ❑ 0 ❑ Other_____
Product Specification
The acrylic bath whirlpool shall be 72″ (1829 mm) in length, 36″ (914 mm) in width, and 20-1/8″ (511 mm) in height. Product
shall be drop-in with custom pump locations. Product shall have 6 individually adjustable ProFlex hydro-massage jets, a pump
with air switch and grounding-type plug-in cord. Product shall have molded lumbar supports and armrests. Product shall have
an optional K-1283 removable apron and an optional K-9696 whirlpool trim kit in various finishes. Bath whirlpool shall be Kohler
Model K-1157-CN-______.
Page 1 of 2
1012989-4-
E
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
PROFLEX®7236
Optional Accessories
K-9696 Jet trim kit (metal finishes) ❑ CP ❑ PB ❑ Other_____
Technical Information
Fixture*:
Basin area:
Bathing well 55″ (1397 mm) x 21″ (533 mm)
Top area 65″ (1651 mm) x 26″ (660 mm)
Weight 66 lbs (29.9 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 72 gal (272.5 L)
* Approximate measurements for comparison only.
Drop-in
cut-out
Pump: V Hz A
1-speed 120 60 7.5
Pump/Control Access
20" (508 mm) W
x 15" (381 mm) H
70-1/2″ (1791 mm) x 34-1/2″ (876 mm)
1"
(25 mm)
18"
(457 mm)
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
39 lbs/square foot (188 kg/square meter) loading.
The apron must be installed before the finished floor and wall
materials are installed.
Pump must be relocated to custom position at the time of
installation. Provide adequate clearance.
No change in measurements if connected with drain
illustrated. (K-11677 or K-11677M)
1-1/2"
(38 mm)
7-1/2"
(191 mm) Max
8-1/2"
(216 mm)
72" (1829 mm)
2-1/2" (64 mm)
3" (76 mm)
PROFLEX®7236 CUSTOM BATH WHIRLPOOL
Page2of2
1012989-4-
E
2-7/8" (73 mm)
1/4" (6 mm)
Product Diagram
20-1/8"
(511 mm)
Drop-in Rim Detail
36" (914 mm)
18-5/8"
(473 mm)
1-1/2" OD
Loading...