How it Works
Kohler
Loading...
K-10349

Kohler K-10349 Installation And Care Manual

Installation and Care Guide
Heated Seat with Nightlight
Français, page“ Français-1” Español, pagina “Español-1”
1347697-2-A
Before You Begin
WARNING: Risk of electric shock, fire, or personal injury.
IMPORTANT! This product cannot be installed to a skirted toilet. The seat mounting holes on the toilet must be accessible from the underside of the bowl to accommodate the toilet seat cord.
NOTICE: Do not use an extension cord with this product.
NOTE: The features for this product can be controlled from a
mobile device. Download the PureWarmth App and follow the App instructions.
Observe all local electrical and building codes. Install an electrical outlet within 4’ (1219 mm) of the toilet.
1347697-2-A 2 Kohler Co.
Washer
1. Install the Mounting Plate
Route the cord through the mounting hole on the toilet. Position the mounting plate over the mounting holes. Position the washers in the mounting plate with the ″+″ oriented
toward the toilet tank. Insert the bolts through the mounting plate and into the
mounting holes.
Kohler Co. 3 1347697-2-A
Combination Tool
Nut
2. Secure the Mounting Plate
Attach the slotted nut onto the cord and slide up on the bolt. Slide the other nut up on the other bolt. Using the provided combination tool, tighten the bolts while
holding the nuts in place.
Slotted Nut
1347697-2-A 4 Kohler Co.
3. Install the Seat
Align the holes in the seat hinge over the posts on the mounting plate.
Press the seat down to click in place.
Seat Removal
Lift the lid and seat to the vertical position. Press the side buttons and lift the seat off the mounting plate.
Seat Adjustment (If Needed)
Remove the seat from the mounting plate. Loosen the bolts, and rotate the washers. Retighten the bolts. Reinstall the seat to the mounting plate.
Kohler Co. 5 1347697-2-A
4. Complete the Installation
WARNING: Risk of electric shock, fire, or personal injury.
If not already installed, install an electrical outlet within 4’ (1219 mm) of the toilet.
Thread the power supply cord onto the toilet seat cord. Tighten the barrel.
Plug the power supply into the electrical outlet. To begin using this product, refer to the quick start guide.
Care and Cleaning
For best results, keep the following in mind when caring for your KOHLER product:
IMPORTANT! Do not immerse product in water.
•
Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
•
Use a soft, dampened sponge or cloth to wipe surfaces clean. Remove the cleaner quickly after applying. Rinse and dry any overspray that lands on nearby surfaces.
•
Do not allow cleaners to soak on surfaces.
1347697-2-A 6 Kohler Co.
Care and Cleaning (cont.)
•
Never use an abrasive material such as a brush or scouring pad to clean surfaces.
For detailed cleaning information and products to consider, visit kohler.com/clean. To order Care & Cleaning information, call 1-800-456-4537.
Range and Function Disclaimer
BLUETOOTH®is the name for a short-range radio frequency (RF) technology that operates at 2.4 GHz. The effective range of most BLUETOOTH mobile devices is 10 meters. BLUETOOTH is designed for very low power use. The compatibility of the BLUETOOTH amplifier interface to mobile/portable devices differs according to the various individual devices and, in particular, may vary with different software versions for a device. The normal mobile device BLUETOOTH range can be up to 10 meters, however, placement of your mobile device and the BLUETOOTH amplifier’s installation environment will impact your reception range.
Water and walls can act as blocking agents to the BLUETOOTH signal that your mobile device is using to broadcast to your BLUETOOTH amplifier. Therefore, selecting an installation location that removes these range blocking obstacles will increase the effective range and performance of your BLUETOOTH amplifier.
You can test your BLUETOOTH reception by performing simple range tests using your mobile device prior to performing a permanent installation. The best way to make use of the short BLUETOOTH range is to make sure your BLUETOOTH amplifier is as close to the BLUETOOTH transmitter (mobile phone, tablet, etc.) as possible. The less distance between the two devices, the greater will be the reliability of your BLUETOOTH audio signal, and the less distance means less obstacles in the medium through which the transmission is passing, so there is a reduced chance of audio signal loss.
The compatibility of the BLUETOOTH amplifier to mobile/portable devices differs according to the various individual devices and, in particular, may vary with different software versions for a device. All functions are based on industry-wide communications standards. Compatibility between the BLUETOOTH amplifier and mobile device is therefore largely dependent upon the software version of the mobile device. Other factors (e.g. installation location, walls, distance) mean that in individual cases, sporadic impairment of functions may occur in devices that otherwise function reliably. Not all functions are supported in all countries.
Kohler Co. 7 1347697-2-A
Range and Function Disclaimer (cont.)
Because of these reasons, Kohler Co. can assume no guarantee for the unlimited compatibility and functionality of your mobile device in conjunction with the BLUETOOTH amplifier.
_________________________________________________________________
®
The BLUETOOTH
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Kohler Co. approved suppliers is under license. Other trademarks and trade names are those of their respective owners.
Compliance
FCC ID: N82-KOHLER023
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
1347697-2-A 8 Kohler Co.
Compliance (cont.)
RF Exposure Warning
This portable transmitter with its antenna complies with FCC’s RF exposure limits for general population/uncontrolled exposure.
This device must not be co-located or operated in conjunction with any other antenna or transmitter.
CANADA IC: 4554A-KOHLER023
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.
Warranty
ONE-YEAR LIMITED WARRANTY
KOHLER plumbing products are warranted to be free of defects in material and workmanship for one year from date of installation.
Kohler Co. will, at its election, repair, replace or make appropriate adjustment where Kohler Co. inspection discloses any such defects occurring in normal usage within one (1) year after installation. Kohler Co. is not responsible for removal or installation costs. Use of in-tank
toilet cleaners will void the warranty.
To obtain warranty service contact Kohler Co. either through your Dealer, Plumbing Contractor, Home Center or E-tailer, or by writing Kohler Co., Attn.: Customer Care Center, 444 Highland Drive, Kohler, WI 53044, USA, or by calling 1-800-4-KOHLER (1-800-456-4537) from within the USA and Canada, and 001-800-456-4537 from within Mexico, or visit www.kohler.com within the USA, www.ca.kohler.com from within Canada, or www.mx.kohler.com in Mexico.
IMPLIED WARRANTIES INCLUDING THAT OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY. KOHLER CO. AND/OR SELLER DISCLAIM ANY LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states/provinces do not
allow limitations on how long an implied warranty lasts, or the exclusion or limitation of special, incidental or consequential damages,
Kohler Co. 9 1347697-2-A
Warranty (cont.)
so these limitations and exclusions may not apply to you. This warranty gives you specific legal rights. You may also have other rights which vary from state/province to state/province.
This is Kohler Co.’s exclusive written warranty.
1347697-2-A 10 Kohler Co.
Loading...
+ 22 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use