The lightning flash with arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of un-insulated “dangerous
voltage” within the products enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their endof-life should be disposed of separately from your household waste.
Please dispose of this equipment at your local community waste collection/
recycling center.
Please help us to conserve the environment we live in!
directives.
1
Page 4
Safety Information
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below
Electrical safety
v To prevent overload, don't share the same mains supply socket with too many other
items of equipment.
- Do not place any connecting wires where they may be stepped on or tripped over.
- Do not place heavy items on the leads, which may damage them.
- Hold the Mains plug, not the wires, when removing from a socket.
- During a thunderstorm or while leaving the TV for long periods, disconnect the aerial
(if outdoor) and mains power from the supply.
- Do not allow water or moisture to enter the TV . Do NOT use in wet
or moist areas such as Bathrooms, steamy kitchens or near swimming pools.
v8]TT\PMXT]OW]\QUUMLQI\MTy, and seek professional help if:
- the mains plug or cable is damaged.
- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.
- anything accidentally penetrates the ventilation slots.
- the set does not work normally.
- Do NOT remove the safety covers. There are no user serviceable parts inside.
You may invalidate the warranty. Qualified personnel only are permitted to service
this apparatus.
- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.
- Do NOT break open or throw exhausted batteries on a fire.
.
Physical safety
v,W67T block ventilation slots in the back cover. You may place the TV in a cabinet,
but ensure at least 5cm (2") clearance all around the unit.
v,W67T tap or shake the TV screen, you may damage the internal circuitry. Take good
care of the remote control, do not drop it or allow it to come into contact with liquids.
v<WKTMIV\PM<>][MI[WN\LZaKTW\P,W67<][M[WT^MV\[WZpetrol based fluids. For
stubborn stains, you may use a damp soft cloth with diluted detergent.
2
Page 5
Names of each part
Front View
INPUT
MENU
CH+
CH-
VOL+
VOL-
POWER
INPUT: Display the input source menu.
MENU: Display/exit the OSD menu.
CH+/-: Scan through channels.
VOL+/-: Adjust the volume.
POWER: Turn on/standby the TV set.
INPUT
Remote Control
3
Page 6
Names of each part
Back View
12
11
10
9
8
7
6
USB2
SD card
USB3
Recovery
RJ45
1
POWER
13
1
1
POWER
2
HDMI1/2
3
SCART
RF
4
2
2
5
USB1
6
VGA
7
PC-IN
8
Coax
9
CI
3
4
10
Mini YPbPr
11
Mini AV
12
Headphone out
USB1/2
13
SD
RJ45
USB1
5
Recovery
4
Page 7
Remote Control
INPUT
POWER
: Turn the TV on/standby.
INPUT: Press to display the input source menu.
NUMBER BUTTONS
Press 0-9 and -/-- to select a TV channel directly when you
are watching TV.
Return to the previous channel viewed.
EPG
ASPECT
PVR
LIST
TV/Radio
SUBTITLE
FAV
Rec.list
NICAM/A2
AUDIO
EPG: To show the Electronic Program Guide during no-menu
state onl
y in DTV mode.
PVR: To start record function.
TV/Radio: To switch to TV or Radio state in DTV mode.
FAV: Display the favorite program list.
VOL+/- : Adjust the volume.
CH+/- : Scan through channels.
MUTE: Press to mute the sound, press again or press
VOL+ to unmute.
EXIT: Exit the OSD menu.
MENU: System setup menu.
CURSOR KEYS OK
Allows you to navigate the on-screen menus and adjust the
system settings to your preference.
ABC/123
NOTIFICATION
5
Page 8
Remote Control
INPUT
Buttons for Android
EPG
ASPECT
PVR
ABC/123
LIST
TV/Radio
SUBTITLE
NOTIFICATION
FAV
Rec.list
NICAM/A2
AUDIO
SLEEP: Standby timer.
PICTURE: Select the picture mode.
SOUND: Select the sound mode.
DISPLAY : Means information, to display brief information
concerning the current channel or disc you are wathching.
Rec.list: Display the record list.
NICAM/A2: TV Nicam/A2 select.
TV/TXT: Turn off
/on the Teletext display.
HOLD: Hold or carry on the current subpage.
SUBPAGE: Press to enter subpages, press again to cancel.
NDEX: Go to index.
I
SIZE: Press to see top half of page double size,
Press again to see the bottom
half of page
double size. Press again for normal size.
REVEAL: Reveal any hidden text.
Color Buttons: S
hort cuts-follow the coloured links in the text.
: Switch to keypad/mouse or remote control.
ABC/123: Switch to digital numbers or letters.
SUBTITLE: Turn on/off the subtitle display in DTV mode.
AUDIO: Change the audio language in DTV mode.
ASPECT: Cycles among screen display modes.
Repeat: Repeat playing the title or chapter.
:
Play/Pause program.
:
Stop program.
:
Fast reverse.
:
Fast forward.
:
Previous chapter.
Next chapter.
:
6
Page 9
Basic Operation
Power on/off
1. Connect to the power supply with the power adaptor.
2. -To turn on the TV
Press POWER button on the TV or remote control.
-To turn off the TV
Press POWER button on the TV or remote control.
Input Source select
Press INPUT button on the TV set or remote control to display the
input source menu, and use CH+/- button on the TV set or
on remote control to select the input source, press OK button on the
remote control to enter.
Note: Before you select the input source, make sure the
connections are prepared.
button
Basic OSD Menu operation
Press MENU button to display the OSD menu as below:
Main menu: Picture Sound Channel Feature Setup
Submenu
(Picture menu
for example)
Hint---you should operate
the OSD menu according
to the hint.
Use/
In the submenu, use
the setup menu, then press / button to adjust, or press / to select and press OK /
/ button to confirm.
* (Press MENU / button to return to the upper menu.)
* (Press EXIT button to exit the menu display.)
button to select the main menu, and press/ OK button to enter the submenu.
button to select the function item, press / OK button to enter
/
Note1: Only when you input the suitable signal, the relevant items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
7
Page 10
OSD Menu
1. Picture menu
Description
Picture Mode: Select your desired picture mode from Dynamic, Standard, Mild and User.
Brightness: Adjust image black level.
Contrast: Adjust image contrast.
Sharpness: Adjust the sharpness (Gray and invalid in VGA/PC mode).
Colour: Adjust image colour from black and white.
Tint: Control the tint ( NTSC mode only).
Colour Temp.: Select an optimum color temperature mode to suit your eyes for viewing from
Warm, Cool, Standard.
Aspect Ratio: Change the aspect for the screen from 4:3, 16:9, Zoom1, Zoom2.
Noise Reduction: If the broadcast signal received is weak, you can select the Noise Reduction
option to reduce the video noise level between Off, Low, Middle and High.
8
Page 11
OSD Menu
2. Sound menu
OSD Menu
Description
Sound Mode: Select your desired sound mode from Standard, Movie, Music, Speech and User.
Bass: Adjust the level of the lower-pitched sounds.
Treble: Adjust the level of the higher-pitched sounds.
Balance: Adjust the audio output between left and right speakers.
Surround: Turn on/off the surround sound function.
Auto Volume Level (AVL): The volumes of all sources will be maintained when the function’s on.
SPDIF: Select the spdif mode for the TV from off, PCM and Auto.
9
Page 12
OSD Menu
3. Channel menu (In ATV/DTV mode)
Description
Australia
Channel Management: Enter the Channel management menu to edit the channels.
PressDelete:
Lock:
User must set the “Lock enable” (Feature-Lock- Lock enable) at ON to active this function.
RED button to sign the channels you want to delete, it will hint you when you exit.
Press GREEN button to sign (lock) or cancel (unlock) the channel. Then you have to enter the
password to view the program.
PressSkip:YELLOW button to skip the channel or cancel the setting, and the program will not be
programmed by CH+/- button.
Swap:
Press
BLUE button to sign the channel, press / button to move, and press OK button to
swap the position.
Favourite Management: Add or remove
favourite channels by the colour buttons.
Up to 4 favourite lists are available,
RED-Fav1, GREEN-Fav2, YELLOW-Fav3,
BLUE-Fav4.
10
Page 13
OSD Menu
Country: Select the country.
When the Child Lock is on, please enter the Password (Lock Password in Feature menu)
to start Auto and Manual Search.
Auto Search: Press OK button to enter the Auto Search menu, select search mode, and press
OK button to start auto search.
Note:
1. ALL: Auto search channels for DTV, ATV and
Radio.
DTV: Auto search channels for DTV and radio.
ATV: Auto search channels for ATV.
2. When the TV is auto tunning, you could
press MENU button to stop auto tunning and
return to preview menu.
DTV Manual Search : Enter the DTV Manual Search menu.
Press button to select the “Channel” item, and press button to select the channel,
then press button to select the “Start” item, and press button to manual search.
7
DVB-T
ATV Manual Search : Enter the ATV Manual Search menu.
Current Channel: Select the current channel for manual searching.
Search: Press OK button to enter the search menu, and manual search the frequency
by button.
Fine Tune: Press OK button to enter the Fine tune menu, and fine tune the frequency
by button.
Color/Sound System: Select the Color/Sound system for the program.
11
Page 14
OSD Menu
4. Feature menu
Description
Lock: This menu allows you to lock certain features of the television so that they can not be used
or viewed. For example if you don’t want certain channels viewed by children or if the television
is to be used in a hotel and you want certain channels be locked.
When you enter the system lock menu you will be asked for a password. As default it is 0000.
Lock Enable - Turn on/off the Lock functions.
Note: When it is be turned on, the functions of Parental Guidance and Change Pin code
below will be locked, and the functions Lock (in Channel Management), Auto Search, DTV
Manual Search, ATV manual Search in Channel menu will also be locked.
Parental Guidance - Select the Parental Guidance mode, or turn off the function.
Change Pin Code – Press OK button to enter, first enter the current code, then enter your
new code and confirm your new code.
12
Page 15
OSD Menu
Hotel Mode - Enter the Hotel Setting menu.
Hotel Lock: Turn on/off the Hotel Lock function.
Channel Lock: Disable the Channel menu in OSD.
Picture Lock: Disable the Picture menu in OSD.
Sound Lock: Disable the Sound menu in OSD.
Feature Lock: Disable the Feature menu in OSD.
Setup Lock: Disable the Setup menu in OSD.
Key Lock: Disable the buttons on the TV set.
Source Lock: Disable the input source you desired.
Set Source: Select the default source when you turn on the TV.
Channel Number: Select the default channel number when you
turn on the TV.
Max Volume: Set the Max volume for the TV.
Default Volume: Set the default volume when the program is on.
Clear Lock: Clear all the locks above, it means set all the locks to
OFF and max volume to 100.
Database Export: Export all Hotel Settings to the USB device.
Database Import: Import all Hotel Settings from the USB device.
Language: Lets you adjust the different language options available.
Clock: Allows you to set the clock (as default the information is taken automatically from the
digital signal).
Sleep Timer: Lets you set the sleep timer so the television automatically switches off after a
certain amount of time.
Auto Power Off: The TV will switch off itself automatically if no change in status within the
time you select. You can choose 1H, 2H, 4H or off.
Hearing Impaired: You can switch on the hearing impaired feature, this provides additional
information and subtitles.
PVR/Timeshift: Setup menu for recording, please see the Recording Operation section.
13
Page 16
OSD Menu
5. Setup menu
Description
OSD Timer: Lets you adjust the amount of time the On Screen Menu stays on the screen
before disappearing.
PC Setup: Change the PC Settings in PC mode.
Auto Adjust: Setup the parameter of the screen automatically.
H/V-Position: Adjust the transverse/vertical position of the screen.
Phase: Adjust the phase of the ADC sampling clock relative to the sync signal, until a
stable image is obtained.
Clock: Adjust the pixel clock frequency, until the image size is maximized for the screen.
Blue Screen: Changes the background when there is no input between clear and a blue
background (Only available in some sources).
Reset TV Setting - This clears all the TV settings for the television.
Software Upgrade: From time to time we may release new firmware to improve the running
of the television (available to download). This menu lets you upgrade that software onto the
television. Further details of how to do this will be issued with the firmware. Contact the
Kogan customer support team via our website.
14
Page 17
Multimedia Operation
Basic Operation
1). Press the INPUT button on the remote control to display the input source menu, select Media
source by the / buttons, and press OK button to enter the Multimedia menu as shown below.
2). Insert USB device, and select the Media mode form Photo, Music, Movie and eBook, then you will
find the name of the device display on the screen as shown below.
Hints for operation
3). Press / button to select the USB device and press OK button to enter the file list as shown below.
Return to
device list
Preview
File list
Information
Hints
Press / buttons to move (press OK button to select the file or unfold the folder);
Press RED button to delete the file; Press GREEN button to sign or cancel all the files to playlist;
Press OK button to sign or cancel the selected file to playlist.
Press button to previous menu, Press EXIT button to select the file view type list( ) or thurnbnail( ).
Press Exit again to return to the root MENU.
Then press button to program the files (be signed) you select or the files in the fold you select.
Press STOP button to stop and exit the full screen program, please notes the hints on the bottom.
15
Page 18
Multimedia Operation
1. Photo
Viewing photos
Press / button to select the option on the table, and press
Note: You could press OK button to display the option table when it disappears.
Play/Pause the photo playing.
Stop and exit the full screen program.
Play the previous or next file directly.
Ratate the picture(0, 90, 180, 270).
Zoom in/out the picture, you could move the picture by Cursor left/right/up/down button in Zoom mode.
Display the information of the current file.
Display the photo setup menu, and select the Repeat mode, Background Music, Slide Time, Effect.
Display the playing list.
OK button to change.
2. Music
Play music
Press / button to select the option on the table, and press OK button to change.
Play/Pause the music playing.
Stop and exit the music playing.
Play fast backward or forward.
Play the previous or next file directly.
Input the time and start playing directly.
ALL
Select the repeat mode for playing music.
Switch the window between “Information” and “Playlist”.
Switch off the screen displaying (BLUE button as quick button), and it will be turned on by
pressing the power button).
16
Page 19
Multimedia Operation
3. Movie
Play movies
Press / button to select the option on the table, and press OK button to change.
Note: You could press OK button to display the option table when it disappears.
Play/Pause the movie playing.
Stop and exit the full screen program.
Play fast backward or forward.
Play the movie in slow mode.
Play the movie in step mode.
AB
Set the A-B repeat playing mode.
Play the previous or next file directly.
Display the playing list.
Display the information of the current file.
Display the movie setup menu, and setup the Program, Subtitle, Audio, Repeat mode.
Goto mode, Input the time and start playing directly.
4. eBook
Display text
Turn to previous/next page of the text.
RED button: Add or delete the bookmark.
GREEN button: Goto the appoint page.
YELLOW button: Display the bookmark list.
BLUE button: Display the playlist.
17
Page 20
Recording Operation
PVR settings
Press the MENU button select Feature-PVR/Timeshift menu, press OK button to enter the menu as below.
1). Record File Format
Select Record File Format mode from TS and PS for storing in the USB device.
2). Partition Select
USB device informations
Format: Press RED button to format the selected USB device.
Set Default Partition: Press GREEN button to set the focus partition as the
default partition. The recorders are stored in the default partition. It need to
be reset if the default partition is full in recording progress.
3). Timeshift Buffer
Set Timeshift Buffer mode: auto, 30Mins, 1hr, 2hr.
4). Timer
Enter the Timer menu to setup the timer recording settings.
Press yellow button to add.
Recorder: Turn on/off the recorder function.
Type: Select the type of the program you want to record.
Channel: Select the channel you want to recording.
Start Time: Setup the start time for recording the program.
Duration: Setup the duration time for recording.
Date: Select the date for recording.
Mode: Select the mode for recording.
18
Page 21
Recording Operation
5). Record List
Display the Record list menu.
Delete: Press RED button to delete the selected record plan.
6). Recorder Start
Press OK button to start recording, as the function of the REC button on the remote control.
EPG and Timer Record
Press EPG button on the remote control to display the EPG menu.
Reminder
EPG mode: Press RED button to change the EPG display mode.
Daily mode: shows the information of the programs to be broadcasted in daily mode.
Weekly mode: shows the information of the programs to be broadcasted in weekly mode.
Reminder: Press GREEN button once to remind the program for watching, and press GREEN button again
to remind the program for recording. You could check it in Timer menu, and the TV will record the
program according to your settings automatically.
Previous/Next Day: Press YELLOW/BLUE button to display the programs on previous or next day.
19
Page 22
Recording Operation
Recording
Press REC button on the remote control to start recording in DTV mode, and the TV will give you a hint.
Select “OK” item, and press OK to start recording, there will be a sign on the screen.
Note:
a. Please make sure the USB device is on the TV.
b. Please make sure the speed and free space of the USB is adequate.
c. Press STOP button to exit the recording mode.
d. Press Recording list button to display the Recorder list, and you could play the program you selected.
The recording will be going on, and the Recording menu will display when you exit the Recorder list.
e. You could also play the Recorded program in Multimedia mode.
Timeshift
PressPAUSE button on the remote control to start timeshift in DTV mode, and the TV will then show
instructions. Select “OK”, and press OK to start timeshift, there will be a sign on the screen, and the
screen will be frozen.
Note:
a. Please make sure the USB device is on the TV.
b. Please make sure the speed and free space of the USB is enough.
c. Press STOP button to exit the timeshift mode.
d. Press PLAY button to play the program you are recording from the beginning, and the timeshift will be
going on.
e. Timeshift time menu on the right top corner shows the fallen time between the current picture and the
living broadcasting picture;
f. During the recoding progress, if the signal drops out, the recording process will pause until the
signal is stable again.
20
Page 23
Smart TV
1. Install Wizard
WELCOME PAGE
when you turn on the TV and first switch to SMART TV channel
INSTALLING WIZARD
Choose your language:
21
Page 24
Smart TV
choose your network,wireless or Ethernet network,and then follow the step setting the network:
Configuration Result:
22
Page 25
Smart TV
MAIN LAUNCHER
Press the arrow buttonsto select the icon and 'ENTER' the sub-screen:
FUNCTIONDESCRIPTION
The AppManager lets you launch
selected applications, such as
Weather, Calendar , News
The Browser allows you enjoy your
time on surfing Internet and searching
for information
The Video/Audio/Picture Player lets
you enjoy all of your videos, music
and pictures from system memory or
storage devices.
The Video/Audio/Picture tab will show
a table of previews of your media files
The Settings screen contains most of
the customizing and configuration
options, such as language, aspect
ratio, date and time and network
23
Page 26
Smart TV
LAUNCHER INTRODUCTION
1
2
3
AreaEXAMPLEDESCRIPTION
Show time and calendar.
1
Youcanse
zone in settings
t
time/date/time
2
List the most used 6 apps
You can set two widgets as:
News,Googlesearchbar,
weather and etc.
3
24
Page 27
Smart TV
MEDIA PLAYER
The “Picture”, “Music” and “Video” are the media player for local storage. You can play media from a USB stick,
SD-CARD etc.
Video
Music
Picture
Music player
25
Page 28
Smart TV
Music player
Picture player
The following table shows the codec or format the product can play (more detail at general outline):
TypeFormat
Video (Upper to 1080P)H.264 (AVI, TS, M2TS, MOV, WMV, MP4, FLV)
DIVX (AVI)
MPEG1, MPEG2,MPEG4 (RM, VOB, MPG, MPEG,
TS, M2TS)
VC1
WMV
AudioMP3
WMA
AAC
OGG
WAV
M4A
Picture (Resolution < 20M)BMP
JPG/JPEG
GIF
PNG
26
Page 29
Smart TV
BROWSER
You will use the following key:
Arrow buttons:
Select and confirm to choose or enter
Menu Key:
Call out the Browser’s menu, include forward, edit bookmark, refresh etc.
Back key:
Back to the last page
Search key :
Call out the search bar for searching or input new web address.
PG +/PG-:
You can use the keys to browse up/ down the web page.
27
Page 30
Smart TV
APPLICATIONS
Install from USB stick/SD card
1. Open the “File Manager”.
2. Choose your USB or any other mass storage’s folder.
3. Find your application, and select it.
4. Press the install button.
5. You can find the application in “App manager” after installation.
Install from Browser
1. Open the Browser.
2. Press search key and input your website address.
3. Download an APK file if there is a link for download this file (*Before download, you must have your SD
card in the card slot).
4. You can find the file in you SD card folder.
5.
Install it use “File manager”.
Install from ApkInstaller
1. Open the ApkInstaller.
2. Find the icon of the application, and enter it.
3. Press the install button.
4. You can find the application in “App manager” after installation.
Install from Google Play
1. Activation of Google Play
Go to ”Settings”. Then go to ”Application”and activate ”Google market setting”.
Press “HOME”
2. From home go to App Manager. Click on APP named MARKET.
The following pop up message will appear:
“ You must add an account the device to continue, Do you want to add one now?”.
Select “YES”.
Add Google account and press “NEXT”.
You will receive the choices: Don’t have Google account - Create
Already have Google account- Sign in
If you don’t have an account, you need to create one. Please follow the on-screen instructions.
It is normally easier to create an account from a computer.
If you have a Google account, choose Sign in.
28
Page 31
Smart TV
Enter your User name & password and login
Info will come that your account now is linked to the television.
Then press finish setup.
You will see waiting circle informing you the unit is LOADING
Sometimes when Google is very busy you may see the waiting circle for long time.
In most times is ok to press “return “ and then click on APP Market
Then new popup message will appear ask you to accept terms from Google.
Press “accept” to continue.
Now App Market will open .
You will after some time receive more popup to accept the new terms / conditions.
For Google Play after accepting this Market APP will change Google play App.
Copy and move files
1. Open “filebrowser” in APPS collection.
2. Change “select/open mode” to “select mode”.
3. Select file
4. Press menu on remote control or click “show Edit dialog” icon on top of screen, then you
can make selection to move and copy files.
NOTE: You can read “help” in filebrowser app for reference..
Remove Applications
1. Enter SETTINGS
2. Enter "Applications--Manage applications"
3. Find the application you want to remove in tab "All"
4. Enter the icon and press "Uninstall"
5. Press "OK" to confirm uninstall
SETTINGS
29
Page 32
Smart TV
Setup settingsBrief description
Wirelnetworks
ess &
Applications
Ethernet
Check to turn on Wi-Fi so you can connect to Wi-Fi networks
Check to receive an alert when an open Wi-Fi network
becomes available
Opens a dialog where you can add a Wi-Fi network by entering
its SSID (the name it broadcasts) and security type
Compatibility Mode
Manage applications
Running services
Storage use
Check to turn on Ethernet so you can connect to Ethernet
networks
Reset to factory defaults
Storage settings
Language & Keyboard
System updates
This will erase all data from your device’s internal storage
To also clear music, pictures, and other data, the SD card needs
to be erased
Total space
Available space
Erase USB storage
Available space of internal storage
Select language
User dictionary
Android keyboard
Virtual Keyboard
Your SMART TV System has built-in virtual English keyboard
So if you want keyboard layout to include Scandinavian Characters
then go to Google play and install the free app Scandinavian Keyboard
External Keyboard
If you have installed external keyboard to your system and then change your default language
then you must unplug and re-connect the USB to activate your change ( Re-Boot system also
works )
Updating system
About module
Status
Model number
Android version
Baseband version
Kernel version
Build number
Wi-Fi IP address
Wi-Fi MAC address
30
Page 33
Smart TV
EXCEPTION HANDLING
Systems restore
If the Smart TV cannot start successfully, please proceed as follows:
*Please read carefully before operation!
1.Unplug your storage devices, such as: SD card, USB drives, mobile HDD and etc.
2.Unplug the power
3.Press the RECOVERY button,
until you see the following
suppl
screen:
y
then plug
in the power, release the RECOVERY button
4.Use Up/Down buttons to choose “wipe data/factory reset” and enter it
5.Use Up/Down buttons to choose “Yes -- delete
(
*Warning!: It will delete all of user’s information after confirmation
all user data” and enter it
)
31
Page 34
Smart TV
6.Use Up/Down buttons to choose “reboot system now” and enter it, the product will reboot after confirmation
7.The product will enter the system successfully
32
Page 35
Smart TV
General Outline
OSAndroid 4.0
ARMARM Cortex A9
FrequencyUp to 1GHz
RAM1G DDR3
ROMBuilt-in 4GB NAND Flash
I/R remote signal receiver input x1
I/O
NetworkingBuilt-in WIFI
Language
Display
Specs
Media
Format
Feature
SD slot(support up to 32GB) x1
USB 2.0 input x2
Swedish, English, German, Spanish, Arabic, Chinese, Japanese,
French, Russian ETC.
Aspect Ratio : 16:9
Resolution: 720p,1080p
Video Formats: Full-format 1080P HD video decoding play
Supported Video decoding: MPEG 1, MPEG 2,MPEG4, H.264, H.263,
VC-1, RV30/40,
Supported Audio decoding: PCM, LPCM, MP3, AAC, MPEG Audio,
WM
Music format: WMA,MP3,WAV,AAC
Picture format: JPG,GIF,BMP,PNG
FTI (First Time Installation )
Screen keyboard or support USB keyboard, wireless keyboard and
mouse
Video, music, picture player
File manager
ApkInstaller
Email, Gmail and etc.
Support kinds of third-party softwares
Support Adobe Flash player
33
Page 36
Trouble shooting
Do not use other functions that are not mentioned in this user’s manual.
In case a problem occurs with your TV, please take the following steps first.
If you still have the problem, turn the power off and contact the Kogan Customer service center.
The screen does not appear.
noitcAmelborP
Is the power plug pulled out? Insert the power plug.
Press the power button of the remote control.
The screen appears too
slowly after the power is turned on.
Screen is too bright or too dark.Perform brightness adjustment or Contrast adjustment.
Screen is too large or too small.Adjust the screen size.
Stripes appear on the screen
and it shakes.
The screen does not move.Press the PAUSE button. Check if the Pause button is pressed on
Screen appears, Voice is not heard
Remote control does not work
This problem occurs for a brief time in the process of
image elimination processing in order to hide temporary screen noise
that occurs when the power is turned on. But if the screen does not
come after 1 minute contact the Kogan customer service
center.
Stop using wireless telephones, hair driers and electric drills.
external equipment.
1. Press the "MUTE"button.
2. Increase the sound level by pressing volume adjustment button.
3. Check if sound terminal of external input is connected properly.
4. Check if audio cables are connected properly.
5. Select and check the other input.
If the sound still does not work and the other channels are the
same after you have done as the above, contact the Kogan Customer service center.
1. Check if main power is On.
2.
Check that the batteries of the remote controller were loaded
properly.
3. Check to see if any obstacle exists between the
the remote control , then remove it, if any.
4. If the batteries have no power, replace them with two new
batteries.
TV and
This TV is for household use and registered as harmless on electromagnetic waves.
Therefore, you can use it in every location as well as residential areas.