Kogan Khstvqcdona User Manual

KHSTVQCDONA

USER MANUAL

Note:

1. Thank you for purchasing this product, the operational guidelines below contains
important information about safe and proper use of this device to avoid accidents, so
please read the instructions carefully before use.

2. Keep the device away from high temperatures or damp and dusty conditions.

3. Avoid dropping, falling or intense collision.

4. Do not switch off the power while in the process of upgrading or
uploading/downloading the firmware, or it may cause program error.

5. Do not disassemble or clean unit with alcohol, diluent or benzene liquor.

6. The manufacturer reserves the right to improve the product, if the specification or
design is changed, without prior notice.

7. Disclaimer: The manufacturer only assumes responsibility for the product’s service
and maintenance , but not for the data loss and other joint liabilities in the process of
use.

8. The device is not waterproof.

9. Pictures listed in this manual are for reference only.

1、Connect the device.

Insert the HDMI plug into TV or other display device via the HDMI port, and enable

the signal route for this connected HDMI port on TV（Please refer to TV
guidelines). Connect Micro USB port with original power adapter; The USB port
works with 2.4GHZ device, such as a mouse, keyboard, USB flash drive etc.

(Note: The connection diagram only for reference purpose, there may be small
differences in the product models, so please take this into consideration.)

2、Get started

2.1 Turn on the device: plug in the power, the LED indicator will light up and the

device will be switched on automatically.

2.2 Operating instructions：Go into the home page, the device can be operated with

a mouse. The left button works as “enter”, while the right button works as“return”.
Scrolling the mouse is 'page up' and 'page down'.