Kogan KGNPRO22VD User Manual

KGN1080PPRO22VDA
USER MANUAL
AUDIO
S.MODE SLEEP
3
1
1
4
4
3
2
2
6
6
5
5
78
78
0
0
USB/SD
A/DTV
FAV
SOURCE
9
9
TITLE
MENU
OK
EXIT
CH
MUTE
INFO
+
VOL
TU P
SE
D.
DV
EPG
ASPECT
E
/AUTO
ITL
SU BT
ZOOM/REC.LIST
X
A-B
TTX
REPEAT
D.MENU
SLOW
RC-TFG019
GOTO
P.MODE
Remote control/batteries
Power/Standby button
Picture mode button
Sound mode button
P.MODE S.MODE
123
1
I/II
SLEEP
AUDIO
2
3
Remote control indicator
Sleep function button NICAM function button / Audio language select button
USB/SD Card function select / Favorite program button
Signal source select button
Information display button
Mute button
Volume adjusting button
DVD stop button
DVD play/pause button
Teletext on/off / mix button
DVD rewind / Teletext cancel button
Disc menu / Teletext hold button
DVD forward / Teletext reveal button
DVD goto / RED button
DVD slow / GREEN button
456
4
789
789
USB/SD
A/DTV
FAV
SOURCE
5
0
0
6
TITLE
MENU
OK
INFO EXIT
MUTE
+
VOL CH
ASPECT
DVD.SETUP
/AUTO
EPG
REPEAT
SUBTITLE
ZOOM/REC.LIST
A-B
RC-TFG019
TTX
D.MENU
GOTO
X
SLOW
Numeric buttons
DVD title / Return channel button
Menu button
Navigation buttons (Up, Down, Left, Right)
Confirm button
Menu exit button
Channel select button
Display mode select button DVD open/close / Auto adjust button in
PC mode / Recording button DVD setup menu / Electronic program guide button
Subtitle button
DVD previous / Teletext size button DVD zoom in/out / Recording list /
Teletext index button DVD next / Teletext subpage button
DVD A-B repeat / BLUE button DVD repeat playback / YELLOW button
P.MODE: S.MODE: I/II:
SLEEP: 0,1-9:
Picture mode button, setting the picture mode.
Sound mode button, setting the sound mode.
Press the I/II button to choose a different audio channel.
Sleep button, setting TV power off time.
TV channel selection button.
USB/SD:
SOURCE:
OK: INFO:
Press the USB/SD button to choose USB or SD card function.
Press the FAV button to start the “Favorite List” for selecting your favorite program.
Signal source selection button (ATV/DTV/AV/PC/Component/DVD/HDMI).
Confirm button, confirm all the changes and settings.
Press the INFO button for information.
MUTE ASPECT:
AUTO:
Press the ASPECT button to select the picture display ratio: Auto / 4:3 / 16:9 / Zoom 1 / Zoom 2 / Just Scan.
Press the EPG button for detailed information about the channel.
Press the AUTO button to auto adjust items in PC mode.
1
2
Power indicator.
Remote sensor.
Power on/off button.
8. USB port.
9. SD/MMC/MS card slot.
10. OPEN/CLOSE button.
11. PLAY/PAUSE button.
8
9
10
11
Insert DVD with Label to the Back
DC IN
SERVICE
HDMI
Pb/Cb
Y
Pr/Cr
COAXIAL OUT
VIDEO
RL
Service input (Available for performing PVR function or updating the firmware).
Component video input terminals (Y Pb/Cb Pr/Cr).
Composite video & audio input terminals (AV).
RF(75 )
YPbPr
AV
SERVICE
DC IN
HDMI
Y
Pb/Cb
Pr/Cr
COAXIAL OUT
VIDEO
RL
RF(75 )
Please select an OSD Language
If this is the first time switch on, the First time installation menu will appear on the display.
English Español Italiano
FrançaisDeutsch
OK
Channel Tuning
TV :
DTV :
Radio :
0 %
Please press MENU key to exit
0 Programme
0 Programme
0 Programme
(TV)
Language
Press o/p/b/a button to select the desired language, then press OK button to enter the “Channel Tuning” screen. The original language of this TV is English.
Channel Tuning
The TV will start searching channels automatically from the lowest frequency. When it finds a station, it will store this in the first location and move to the next. When auto tuning is completed, the TV will display the first station found.
Press MENU or EXIT button to skip or cancel the tuning process.
8
CHANNEL
Move
1 CHANNEL MENU
The image on the left depicts the channel menu. The definition of each option:
Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
Signal Information
MENU
Return
OK
Select
EXIT
Exit
Auto Tuning: Press button to this position, then press or OK button to enter auto tuning of both ATV and DTV channels. DTV Manual Tuning: Press button to this position,
OK
then press or
button to enter DTV Manual Tuning. It will scan current DTV (Digital TV) program within a f
requency range accurately and store the result manually.
ATV Manual Tuning: Press button to this position,
OK
then press or
Programme Edit:
button to enter ATV Manual Tuning.
Press button to this position, then press or OK button to enter Programme Edit screen. You can do such editing operations as delete, rename, move, skip (sign/cancel the skip mark) and fav (add/ delete to the favorite program list) for the selected channel in the available channel list when the “Programme Edit” is selected. Signal Information (For DTV only): Press button to this position, then press or OK button to enter Signal Information screen.
Channel Tuning
TV :
DTV :
Radio :
0 %
Please press MENU key to exit
DTV Manual Tuning
VHF CH 9A
Press OK to search
Bad Freq: 205.50 Mhz Good
0 Programme
0 Programme
0 Programme
(TV)
Auto Tuning:
It will auto scan the channels automatically, and stop at the end of the channel search. The auto scan result stores in the internal memory automatically.
DTV Manual Tuning:
Press b/a button to select channel,
then press OK button to search programs.
9
ATV Manual Tuning
Current CH
Color System
Sound System
Fine-Tune
AFC
Search
Menu
1
PAL
BG
44.00 MHz
Off
ATV Manual Tuning:
Current CH: Press b/a button to select the channel number you want to store. Color System: Press b/a button to change the color system as Auto, SECAM, PAL. Sound System: Press b/a button to change the sound system as DK, I, BG. Fine-Tune: Press b/a button to scan current program within a frequency range accurately and store the result manually. AFC: Press b/a button to set the Automatic Frequency Control to On or Off. Search: Press b/a button to start search.
1 S-43
2 S-09
3 S-11
4 S-14
Delete
OK
Programme Edit
Rename Move Skip
FAV
MenuFav
ATV
ATV
ATV
ATV
Programme Edit: Press o/p button to move the high- lighted bar. Press the colored short-cut keys to do the editing operations, and press MENU button to stop the editing work.
Note: Before doing editing operations, make sure the channel list is not an empty one.
This option has five functions:
1. Press Red button to delete the current channel.
2. Press Green button to rename the current channel (For ATV only).
3. Press Yellow button and o/p button to move the current channel (For ATV only).
4. Press Blue button to skip the current channel.
5. Press FAV button to set the current channel to your favorite channel, there will be a red heart at the behind of the channel selected. If the current channel is already be one of your favorite channel, press it again will set it to a normal one. You can call out the channels from the “Favorite List” by pressing FAV button while enjoying TV program.
Signal Information
Channel 154
Frequency 205.50 Mhz
Quality 99
Strength 22
Signal Information (For DTV only): This menu displays signal details, including Channel, Frequency, Quality and Strength.
10
PICTURE
Move
2 PICTURE MENU
The image on the left depicts the picture menu. The definition of each option:
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
Colour Temp
Noise Reduction
MENU
Return
OK
Select
Personal
50
50
50
50
30
Normal
Middle
Picture Mode: Changes the picture mode in sequence: Dynamic Standard Mild Personal. You may select the picture mode by pressing P.MODE button repeatedly. Contrast: Changes the value of contrast with the key in the range of 0 to 100.
EXIT
Exit
Brightness: Changes the value of brightness with the key in the range of 0 to 100. Colour: Changes the value of colour with the key in the range of 0 to 100. Tint: Changes the value of tint with the key in the range of 0 to 100 (For NTSC signal only). Sharpness: Changes the value of sharpness with the key in the range of 0 to 100. Colour Temp: Changes the colour temperature in sequence: Cold Normal Warm. Noise Reduction: Changes the picture noise reduction in sequence: Off Low Middle High Default.
SOUND
Move
AD Switch
MENU
Return
AD Volume 30
Sound Mode
Treble
Bass
Balance
Auto Volume
SPDIF Mode
AD Switch
Menu
3 SOUND MENU
The image on the left depicts the sound menu. The definition of each option:
Standard
50
50
0
Off
Auto
Off
OK
Select
EXIT
Exit
On
Sound Mode: Changes the sound mode in sequence: Standard Music Movie Sports Personal. You may select the sound mode by pressing S.MODE button repeatedly. Treble: Changes the value of treble with the key in the range of 0 to 100. Bass: Changes the value of bass with the key in the range of 0 to 100. Balance: Changes the value of balance with the key in the range of -50 to +50. Auto Volume: Changes the auto volume mode to “On” or “Off”. SPDIF Mode: Changes the SPDIF mode
in sequence:
Auto Off PCM.
AD Switch (For DTV only):
Press button to this
position, then press or OK button to enter. Press b/a button to select the audio descriptor to On or Off as well as adjust the volume of the AD.
11
TIME
Move
4 TIME MENU
The image on the left depicts the time menu. The definition of each option: Clock (For DTV only): Display the current system time. It’s not available.
Time Zone (For DTV only): Press p/o/b/a button to
set the proper time zone according to your region.
Sleep Timer: Set the sleep timer to put automatically
the TV in standby mode. Timer can be selected as 10, 20, 30, 60, 90, 120, 180, 240 and 0 Min(Off). You may select the sleep timer by pressing SLEEP button repeatedly.
Auto Standby:
The options are Off, 3 H, 4 H, 5 H. You can set the main unit to turn off automatically when there is no signal in a preset time (1 minute while the input source is "PC").
OSD Timer: Changes the OSD timer as 5 S, 10 S,
15 S, 20 S, 25 S, 30 S.
EXIT
-- -- -- --
NSW/ACT
Off
Off
15 S
Exit
Clock
Time Zone
Sleep Timer
Auto Standby
OSD Timer
MENU
Return
OK
Select
LOCK
Move
5 LOCK MENU
The image on the left depicts the lock menu. The definition of each option:
EXIT
Off
NO BLOCK
Off
Exit
Lock System: Press o/p button to select Lock System, then press a or OK button to select On or Off which enables or disables below lock functions. Password: Enter the default password “0000” to go to the LOCK function menu if you have set Lock System to On.
Set Password: Set a new password. Block Program: Add or release a lock to some special
program. When watch a locked program, a dialogue box appears. You should
enter the correct password. The
initial password is “0000”.
Parental Guidance (For DTV program only):
Set the parental guidance level. Key Lock: Set to On, the keypad on the main unit except POWER button cannot work. Hotel Mode: Set the hotel mode function.
Lock System
Set Password
Block Program
Parental Guidance
Key Lock Hotel Mode
MENU
Return
OK
Select
12
Please enter old password
Please enter new password
Confirm new password
Clear Cancel
Set Password:
You can change the password by entering the old and a new password and then re-entering confirm the new one.
it to
Block Program
350 DVB-4-1
351 DVB-4-1
352 DVB-4-1
353 DVB-4-1
OK
Parental Guidance
BLOCK ALL
OK
Lock
G
PG
M
MA
AV
Menu
Menu
DTV
DTV
DTV
DTV
Block Program:
Press Green button to lock the desired
channel, press it again to unlock it.
Parental Guidance (For DTV program only):
o/p button to set the parental guidance level.
Press
13
Hotel Mode
Source Lock
Default Source
Return
Return
Default Prog
Max Volume
Clear Lock
OK
Select
OSD Language
TT Language
Hearing Impaired
PVR File System
Aspect Ratio
Blue Screen
First Time Installation
Reset
Software Update (USB)
OK
Select
HOTEL
Move
SETUP
Move
MENU
MENU
Select Disk
Check PVR File System Start
USB Disk
Format
Time Shift Size
Speed
Free Record Limit 6 Hr.
OK
Menu
Hotel Mode: Have the priority than other options below. To set below options, this item must be set to “On” firstly.
Off
Off
1
100
Source Lock: To set the input source item which you want to be locked. Default Source: To set the default input source when you open the TV main unit. Default Prog: To set the default ATV channel program
EXIT
Exit
when you power on the TV.
Max Volume: To set the maximum volume value. Clear Lock: To clear all the locks.
6 SETUP MENU
The image on the left depicts the setup menu. The definition of each option:
English
West
Off
16:9
On
EXIT
Exit
C:
OSD Language: Changes the OSD language as English Spanish French Italian German.
TT Language: Set the teletext language. Hearing Impaired (For DTV only): Changes the
hearing impaired mode to “On” or “Off”. PVR File System (For DTV only): To check the USB connected and provide with the recording function. Aspect Ratio: Changes the aspect ratio in sequence: Auto 4:3 16:9 Zoom 1 Zoom 2 Just Scan. (“Just Scan” is panoramic display, so black edging may appear according to the data rate. “Auto” and “Just Scan” may be not available in some sources.)
Blue Screen:
Set to “On”, blue screen displays; set
to “Off”, blue screen disappears. First Time Installation: Set
relevant options including OSD Language and Channel Tuning. Please refer to P8 for concrete operations. Reset: To set all the options to factory
setting
(Set this option only when it is necessary). Software Update (USB): To
update software by using
USB.
PVR File System (For DTV only): Firstly insert USB device to the SERVICE port, and press o/p button to choose “Check PVR File System”, then press OK button to start checking. This process needs some seconds. If it finishes, the word “SUCCESS” will be shown after “Check PVR File System”, and the speed will be shown on the menu as well. Now you can record and save the DTV programme.
Note: Hard disk with self-contained power is suggested to be used.
14
Play FB FF Prev. Next Pause Stop
9 Nine Digital 15:51
Recorded List
HI-1
HI-2
HI-3
HI-4
HI-5
Programme
[00:00:59]
(0000:23:40)
Press button on the remote control to start recording the programme. “ ” mark appears at the top left corner of the TV screen, and the title bar appears at the bottom which includes the recording information. You can press b/a button to select one function you want to run, then press OK button to operate. Press EXIT button to hide the title bar. You can press relevant buttons on the remote control to perform such functions directly.
Press REC.LIST button to display the recorded list. Press o/p button to select the desired one, then press OK button to play the recorded programme.
Press Red button to delete the current list. Press Green button to show the list’s information. Press INDEX button to sort all the programs according to Programme, Channel or Time.
Delete
OK Index
Input Source
ATV
DTV
AV
PC
Component
DVD
HDMI
OK
INFO
1.
Press SOURCE button to change from ATV to other
available inputs.
2. Press button to select signal source.
3. Press OK or button to confirm.
4. Press EXIT button to exit signal souce menu.
15
17
18
19
20
21
TV SYSTEM SCREEN SAVER
TV TYPE
PASSWORD
RATING
POWER RESUME
DEFAULT
DVD.SETUP
DVD.SETUP
TV SYSTEM
SCREEN SAVER
TV TYPE
PASSWORD
RATING
POWER RESUME
DEFAULT
NTSC PAL
AUTO
22
Screen Saver
TV SYSTEM
SCREEN SAVER
TV TYPE PASSWORD
RATING
POWER RESUME
DEFAULT
TV Type
TV SYSTEM SCREEN SAVER
TV TYPE
PASSWORD
RATING
POWER RESUME DEFAULT
ON
OFF
4:3PS
4:3LB
16:9
Power Resume
Password
Rating
23
TV SYSTEM SCREEN SAVER
TV TYPE PASSWORD
RATING
POWER RESUME
DEFAULT
TV SYSTEM SCREEN SAVER
TV TYPE PASSWORD
RATING
POWER RESUME
DEFAULT
1 KID SAFE 2 G 3 PG 4 PG13
5 PG-R
6 R 7 NC-17
8 ADULT
RESTORE
GERMAN SPANISH
FRENCH ITALIAN
5
5
24
5
25
FULL
6 / 8
4 / 8
2 / 8
OFF
26
27
28
21.5 inch
476.64mm (H) X 268.11mm (V)
16:9
1920 X 1080
300 cd/m
1000:1
170
0.24825mm (H) X 0.24825mm (V)
16.7M
5ms
160
YPbPr Input
Service Input
(For YPBPR, AV)
1920x1080
2 (3W, 4 Ohm)
1
1
1
1
1
DV 12V 6A
50W
pin
29
Loading...