Kogan Kausbtntbla User Manual

BEFORE USE
1. Choose a safe location and avoid placing the unit in direct sunlight or near any heat source.
2. Avoid environments subject to vibration, excessive dust, cold or moisture.
3. Due to the risk of electrical shock, do not open the casing. Should a foreign object accidentally find its way into the interior of the unit, contact the Kogan customer support team.
5. Keep a copy of this manual handy for future reference.
TURNTABLE PARTS
2
1. TONE ARM REST: this rest is used to hold the tone arm while you are loading your record,
2. RPM: 45RPM Adapter
3. ARM CLIP: This specially designed arm clip secures the tone arm when nor in use at upright position. When the unit is in use, fold this tone arm down so as to not block your record.
4. TONE ARM: The turntable comes with a ready to use, pre-balanced tone arm and cartridge. The tone arm is raised and lowered by hand, Please note that the tone arm needs to be moved away form its resting position on the arm clip for the turntable motor to start,
5. CARTRIDGE PROTECTOR: Please remove the plastic cartridge protector before placing the cartridge on a record by sliding it forward, off of the cartridge.
6. RUBBER MAT: Protects your records while playing.
7. RCA OUTPUT: Use to connect to external speakers (not included).
8. USB JACK: for charging and connecting to PC for recording and editing by USB cable.
9. 33/45: Alternate play speeds between 33/45 RPM.
LISTENING TO A RECORD
1. Lower the ARM CLIP so you can place a record.
2. Place a record on the turntable and set the player speed to match the record speed. NOTE: when playing a single (a 45 rpm record) and/or records with large center holes, use the 45 rpm adapter.
3. Remove the needle arm from its rest, and gently move it to the desired position over the record. The turntable platter will begin when the arm is moved towards it. Gently let the needle arm descend onto the record to begin playing.
3
Loading...
+ 7 hidden pages