Page 1
Bluetooth Remote Selfie Stick
KASTRBTSLFA
Quick Start Guide
Thank you for purchasing this product. For optimum performance, please read
these instructions carefully and keep a copy handy for future reference. This
device has a built-in Bluetooth module that supports both iOS and Android
smart phones.
What's in the Box
• Wireless Monopod Remote
• Phone Clamp
• USB Charging Cable
Product Specifications
Operating System: iOS 4.0 or above / Android 3.0 or above
Remote Working Distance: 10 metres
Charging Voltage: 5V
Charging Input: 500-1000mA
Charging Time: 2 hours
Standby Time: 72 hours
Operating Instructions
Apple iOS/Android
Turn the monopod on by pressing the key.
Open your smartphone settings and turn Bluetooth ON.
Search and connect to the Bluetooth device named “Kjstar”.
A password is not necessary for pairing. The pairing is available while the blue
LED light is flashing. Please operate within 40 seconds, otherwise the monopod
will automatically power off to save power.
You will need to restart the unit and pair it to your phone again.
Recharging and LED Indicator
• Charge for 2 hours before use.
• Turn the remote off before charging each time.
• The red LED will light up when charging.
• The red LED will go out when the unit is fully charged.
• The blue LED will light up when the battery is low.
Loading...