FULL MOTION SPRING-ASSISTED
RGB GAMING MONITOR MOUNT
WITH USB HUB (DUAL)
KASMM39S24A
SAFETY & WARNINGS
Read the entire user guide before you start Installation and assembly. If you have any
question regarding any of the instruction or warnings, please contact Kogan.com for
assistance.
CAUTION: Usage with products heavier than the rated weights indicated may
result in instability causing possible injury.
• Please closely follow the assembly instructions. Improper installation may result in
damage or serious personal injury.
• Safety gear and proper tools must be used. This product should only be installed
by professionals.
• This product is designed to be installed on solid concrete walls, masonry walls or
wood stud walls.
• Make sure that the supporting surface will safely support the combined weight of
the equipment and all attached hardware and components.
• Use the mounting screws provided and DO NOT OVER TIGHTEN mounting
screws.
• This product contains small Items that could be a choking hazard If swallowed.
Keep these items away from children.
• This product is intended for indoor use only. Using this product outdoors could lead
to product failure and personal injury.
IMPORTANT: Ensure that you have received all parts according to the component checklist
prior to Installation. If any parts are missing or faulty, contact Kogan.com tor a replacement.
MAINTENANCE: Check that the product is secure and safe to use at regular intervals (at
least every three months).
A (x1)
B (x2)
C (x1)
D (x1)
E (x1)
F (x1)
G (x1)
H (x1)
I (x1)
J M6x12 (x3)
K
M6x10 (x2)
L (x2)
M
4mm (x1)
N
6mm (x1)
O (x1)
M-A
M4x12 (x8)
M-B
M5x12 (x8)
M-C
D5 (x8)
COMPONENTS
OVERVIEW
Inputs and controls
INSTALLING TO DESK
A CONFIGURATION (CLAMP)
Step 1: Connect C to the base of the mount (A) with J screws (M6x12mm), using the Allan
key (M) to secure.
Step 2: Place L pads on the base of the mount. This protects your desk from scuffing from
the J screws.
Step 3: Select the positioning of D based on the thickness of the desk you’re installing the
Position A
Position B
mount onto. For 10-55mm thickness, use position A. For 50-85mm, use position B.
Step 4: Fit the cable management/cover piece (G) onto the back of the mount assembly.
Place onto your desk and turn knob to tighten.
B CONFIGURATION (THREAD HOLE)
Notes:
• Some desks come prepared with a hole for thread-hole mounting. If your desk
does not, a
• If you do not wish to drill a permanent hole in your desk, refer to ‘A Configuration’,
which uses the clamp method.
Step 1: With the F bolt in position, connect E to the base of the mount (A) with J screws
(M6x12mm), using the Allan key (M) to secure.
ø10mm hole will have to be manually drilled for this configuration.
Step 2: Place L pads on the base of the mount. This protects your desk from scuffing from
the J screws.
Step 3: Place mount onto desk, threading the bolt (F) through the hole. Ensure the hole is
ø10mm (or ø3/8”). Fit H bracket and I knob, then tighten knob to secure.
MOUNTING MONITORS
Step 1: To fit the VESA mount to your monitors, use the provided screws (M-A. M-B) and
washers (M-C) to ensure the correct length – it is important not to insert a screw that is too
long, as it may permanently damage your monitor. Refer to monitor’s specifications to be
sure. Use a Phillip’s head screw driver (not supplied) to tighten (do NOT use a drill) and do
not force past point of resistance.
Step 2: Turn the locking mechanism to ‘unlock’ position, then with two people lift the
Unlock
Lock
monitor up and attach to the stand. Then turn the locking mechanism back to ‘lock’
position to secure.
Step 3: Use the M and N Allen Keys to tighten the mount into your preferred position.
M
M
N
Step 4: Using a Phillips head screw driver (not supplied), remove the cable management
covers. Once your cables are in place, replace the cover.
Removing:
Replacing:
Step 5: Rotate the monitors if needed. If the display does not stop at your desired position,
b
a
tighten the screws (a) and (b) as shown.
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
Loading...