Kogan Kaskprpblka User Manual

Digital Skipping Rope - Calorie and Jump Counter

Quick Start Guide

KASKPRPBLKA

Our Digital Skipping Rope gives you all the benefits of a normal skipping rope, while also tracking your workout data
and helping you through your session. The Digital Skipping Rope tracks both your jumps taken and calories burned.
The timer can be programmed to countdown a set workout time or track your elapsed time.

Product Checklist

The following items are included:

- Digital Skipping Rope – Calorie and Jump Counter

Features

1. Voice Announcement – announces calorie consumption, no. of jumps, workout time and remaining time

2. Auto/Manual Voice Announcement – makes announcements manually or automatically according to presets

3. Target Setting - sets timer, up to 99 minutes.

4. Multiple Display Modes - Number of jumps, Calories, Elapsed time and Countdown timer.

5. Adjustable rope length

Getting Started

The Digital Skipping Rope comes with the rope and handle separated. Please assemble the rope in accordance with the
following diagram.

The Digital Skipping Rope uses 2 x AAA batteries for power. Please follow these steps to install the batteries:

1. Open the battery compartment cap at the end of the handle by turning the cap counter-clockwise.

2. Remove the battery compartment cap and install two new AAA batteries with the '+' polarity facing outwards as

indicated by the polarity symbols ( + and - ) marked on the unit.

3. Replace the cap by turning clockwise until it snaps into place. The rope will beep twice

Note: If the sound weakens, distorts, or the display dims, please replace the batteries.

Setting Weight

In order to calculate calorie consumption, the rope requires your weight. Follow these steps to enter your weight:

1. Repeatedly press MODE until you are NOT within the COUNTDOWN TIMER mode.

2. Press and hold down SET until you hear “Enter your weight”. Repeatedly press (or hold) UP and DOWN to set
your weight between 25kg and 150 Kg.

3. Press SET once to confirm and return to the normal display mode.

Setting Countdown Timer

You can set up your target workout time by following these steps:

1. Repeatedly press MODE until you hear “Countdown Timer”

2. Press and hold down SET until you hear “Set Timer”. Repeatedly press (or hold) UP and/or DOWN to set the
target workout time, up to 99 minutes.

3. Press SET once to confirm and return to normal display mode.