Introduction
Thank you for your purchase of the Electric Scooter. This scooter will provide you
with hours of fun and help you get some exercise, something we could all use.
The scooter is an environmentally-friendly mode of transportation, costs only few
cents a day to operate and is completely portable with the quick fold mechanism. You
can store it in the car and take it with you on the train or bus!
Your scooter will work best when used upon smooth and flat terrain. You can always
assist your scooter and your overall movement, especially by push kicking like a
traditional push powered scooter. Please be sure to operate your scooter safely and be
aware of pedestrians. Be observant of all local and state laws involving scooter usage.
Pay attention to all safety warnings and cautions noted within this manual.
Important Notice
1. Please press the overload protection switch, so the power can be connected
before using the scooter.
2. Please ensure a full 12 hour charge when using the scooter for the first time,
otherwise the battery may fail.
1. Open the package, and spread out all of the parts needed to build the scooter. Check
you have all the parts.
2
2. Insert the vertical bar into the front fork pipe, pushing the wire through the fork
pipe.
3. Lock the vertical bar clamp tightly.
3