KOGAN SMARTERHOME™
400ML SMART AROMA DIFFUSER
KARMDF400DA & KARMDF400LA
01
Mist outlet
02
Outer cover
03
Water tank cover
04
Air inlet
05
Air outlet
06
Water tank
07
Mist chip
08
Mist button
09
Bottom case
10
Air inlet
11
DC socket
12
Power adapter
• Keep the product out of the reach of children.
• Do not touch the plug or cable with wet hands.
• Unplug the appliance during filling and cleaning.
• Do not operate the appliance without water.
• Keep away from the electrical appliances such as computers and TVs.
• Use only clean water at room temperature to fill the water tank.
• Do not wash the tank
• The product will automatically power off when the water level runs too low.
directly under running water.
Max water level
1
Step
Remove the outer cover from the unit
2
Step
Pour enough water into water tank, ensuring not to overfill (max: 400ml)
Step 3
Add essential oils to the water tank as desired.
Step 4
Replace the top cover and ensure it is secured in place.
Step 5
Connect the power supply and press “Mist” to turn on.
Button Instruction
Button
Press
Instruction
Press
(when off)
Low mist control
High mist control
Power off
Wi-Fi reset
(for Kogan SmarterHome™ pairing)
Operate for 1 hour, then off
Operate for 3 hours, then off
Operate for 6 hours, then off
Operate continuously
1st
Automatic colour cycle
2nd
Pause on the current colour
3rd – 16th
Cycle through available colours
17th
second)
Power on
Press
(when on, cycles
through all three)
Hold (7+ seconds)
Press
(cycles through
all options)
(or hold for 1+
The LED lights are independent and can be adjusted without the mist function active.
Attention: Do not shake, move, or add water to the unit while it is operating.
Light off
CONNECT TO SMARTERHOME™ APP
Install App
Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).
Register
If you do not have a Kogan SmarterHome™ account, register or sign in with a verification
code sent by SMS.
To register:
1. Tap to enter registration page.
2. The system automatically recognises your country/area. You can also select your
country code manually. Enter your email address and tap ‘Next.’
3. Alternatively, you can select ‘Register by mobile number’ and enter the verification
code sent to you by SMS.
4. Create a profile on the next page to define your location and room.
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (the indicator
light may be flashing quickly).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the Mist button for over 7 seconds, until the indicator
light flashes quickly.
Add device through network
5. Once registered, tap “+” in the upper right corner of the app’s home page to add a
new device through the network.
6. Select the product type from the list of options in the app (Air Treatment > Aroma
Diffusers).
7. Ensure that the device is in pairing mode, with the indicator flashing, and tap
“Confirm light is rapidly flashing”.
Notes:
• The device is only compatible with 2.4Ghz networks.
8. Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important
that your SmarterHome™ device and the app are connected to the same Wi-Fi
network during setup.
9. The device will commence the pairing process and connect to the app. Ensure your
Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until
connection is complete.
10. After successfully being added, you will have the option to rename the device and
assign it to a location. It will now be listed on the app’s home page. Tap the device
listing to enter its control page.
The device and the app have to use the same Wi-Fi network.
•
Note:
GOOGLE HOME CONTROL
You will need to have set up a Google Home account prior to linking your
Kogan SmarterHome™ device.
Adding “SmarterHome” to the Google Home app
1. From the home page of the Google Home app, select the “+” icon to access the
‘Add and manage’ page.
2. Select ‘Set up device’, then under the Works with Google banner, select ‘Have
something already set up?’
3. Select the search bar and type ‘Smarter Home’ to locate the Kogan
SmarterHome™ service.
4. Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and
your devices.
5. From here, you will be prompted to sign into your SmarterHome™ account using
either your email or mobile phone number, depending on which method you used
to register your account.
6. Once connected, the app will display any compatible devices linked to your
Note:
functionality, please use the Kogan SmarterHome™ app.
SmarterHome™ account. From here you can assign them to rooms and set up any
routines.
7. Tap on any of the devices to view a list of available commands.
Please note that Google Home can only control the base/core functions of any
compatible SmarterHome™ devices. To make full use of this product’s smart
Note:
AMAZON ALEXA CONTROL
You will need to have set up an Alexa account prior to linking your Kogan
SmarterHome™ device.
Adding “SmarterHome” to the Alexa app
1. From the home page of the Alexa app, select the “ ” icon in the top-right and
select Skills & Games from the sidebar.
2. Select the search bar and type ‘Smarter Home’ to locate the Kogan
SmarterHome™ skill.
3. Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa.
4. From here, you will be prompted to sign into your SmarterHome™ account using
either your email or mobile phone number, depending on which method you used
to register your account.
5. Tap ‘Authorise’ to grant Alexa permission to access the SmarterHome™ app and
your devices.
6. Once connected, the app will perform a search and display the devices linked to
Note:
your SmarterHome™ account.
7. When your devices have successfully connected to the Alexa app, you will be able
to control your Kogan SmarterHome™ devices via Alexa’s voice commands.
Please note that Alexa can only control the base/core functions of any compatible
SmarterHome™ devices. To make full use of this product’s smart functionality,
please use the Kogan SmarterHome™ app.
Step 1
Switch off and unplug the adapter.
Step 2
Remove the outer cover.
Step 3
Do not pour water from
the Air Outlet
Drain the water from the direction shown below.
Step 4
Use a clean swab or cloth to wipe the water tank clean.
Problem
Solution
Power supply not connected properly
The adapter does not match the appliance
Water below operating level or too much water in tank
Water below operating level or too much water in tank
Nozzle is blocked / dirty
Make sure the top cover is securely connected to the base
Model no.
R400A
Dimensions
160 x 160 x 220mm
Input
DC24V 0.5A
Power
10W
Volume
400ml
Device is not
working
Device not
releasing mist
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
Loading...