Kogan KAPMSGTBLEA User Manual

Product Information

Congratulations on the purchase of your new portable massage table. Your new
table has been skilfully crafted to exacting standards, utilising high quality
components and materials. With proper use and care as outlined in this user
manual, your table should provide a long time of reliable performance. To ensure
the safe and correct use of your table, please take a moment to read this entire
guide prior to using the table.

WARNINGS

• Carry out table maintenance periodically. Make sure all screws are secure
and that the cables have not deteriorated or frayed. Make sure the
woodwork has no cracks.

• Do not overload the table beyond the recommended weight limit. This
could result in serious injury to the user.

• Do not use alcohol based cleaners when cleaning the vinyl. This can cause
damage to the vinyl material. Use warm soapy water, then wipe dry.

• Make sure that when using the table, all four legs are on a solid surface and
are at the same height.

• MAXIMUM WEIGHT LOAD: 130kgs

Table Set Up

1. Place the table on it's side, release the buckles, partially open the table,
then remove all accessories. (as shown in Figure 1)

Figure 1

2. Standing behind the table, grasp both table handles and gently swing in an
outward motion to fully open the table. The legs should open
automatically. (as shown in Figure 2)
Turn the table upright by lifting the middle of the table. Press down in the
middle of the table to make sure that the table lays flat. If the table peaks in
the middle, check and straighten out the cables.

Figure 2

Accessories

We have provided optional accessories. Please read instructions fully before use.

Headrest

The headrest consists of a crescent shaped headrest base, and a crescent face
pad. It will give comfortable head and face support.
You may have many options for the headrest base. The adjustable headrest angle
and height can be easily changed by adjusting the base handle (as shown in
figure 3).

Figure 3

Armrest Sling

The armrest sling is a good device to support arms at the front of the table. Hang
the armrest sling on the two bars of the headrest, then stick the other end to the
crescent shaped headrest base (as shown in figure 4).

Figure 4

Side Arm Extension

The removable padded side armrests add table width. They fit into the required
accessory holes in each side of the table. They will give comfortable arm support,
especially for bigger users.

Height Adjustment

Proper table height is determined by the therapists height and technique. You
can adjust the table height by removing the grip knob from each leg, adjusting
the legs and then replacing the knobs.

Backrest Adjustment

Unlock the buckle of the adjustable armrest and you can easily change the angle
of the backrest. Press on the backrest to make sure it has locked securely before
use. To fold down the backrest, lift it up to its maximum angle, then lower down
to a flat position (as shown in figure 5).

Figure 5

Maximum Weight Limits

Position the client in the center of the table to help distribute the weight evenly
and ensure stability. Gently sit near (not on) the center of the table at first, then
sit as close to the center (from the edge) as possible.
The working weight is the combined weight of the client, and the maximum
amount of downward pressure being applied by the therapist.

For example, if a client is 80kgs and the maximum weight for the table is 130kgs,
then the maximum downward pressure that can safely be applied is 50kgs. As
pressure applied at sideward angles put considerably more stress on a table, the
maximum sideward pressure should not exceed 50% of the maximum downward
pressure.

Storage

Attach the headrest base and face pad to the elastic under the table as shown,
with the other accessories stored back in their original position (as shown in
figure 6).

Figure 6

The carry case should be used when transporting or storing the table to help
protect it from damage. When not in use, store the table in a dry, cool location
away from direct sunlight. Do not expose the table to extreme temperatures or
moisture.

Upholstery Care

• Daily cleaning: remove daily dirt and grime from the table with a mild soap
and warm water solution, then dry with a soft lint-free cloth.

• Disinfecting: Disinfect the table as required with an isopropanol based
hospital grade disinfectant cleaner that is approved for use on
polyurethane vinyl.

• Stain removal: Some minor stains can be removed with a mild non-abrasive
cleaner. Spray a damp cloth with the cleaner, then gently wipe to remove
the stain. Rinse thoroughly with warm water, then dry with a soft lint-free
cloth. More stubborn stains may require professional cleaning.

Note: never use harsh or abrasive cleaners or chemicals to clean the table.
Doing so may damage the upholstery. Avoid using any protectants, as they
may also harm the vinyl.