MINI EVAPORATIVE AIR
COOLER
(BLUE, 400ML)
KAPMNCL4BA
SAFETY & WARNINGS
• Ensure to read this user guide prior to first use. Retain this user guide for future
reference.
• Avoid transporting the cooler while the tank is filled with water to avoid spillages.
• Always use clean water in the water tank or distilled water if required.
• Follow the recommended maintenance instructions regularly.
• If water spills on the outside of the device, disconnect it from power and allow the unit
to dry thoroughly before using again.
• Do not place in direct sunlight for extended periods of time.
• Before storing for extended periods of time, run the appliance on high with an empty
tank to ensure the filter is dry.
• Do not touch the power supply or power cord with wet hands.
• Unplug the appliance from power when cleaning, filling with water or moving to avoid
risk of electric shock.
• Do not place any foreign objects inside the appliance.
• Do not place any items on top of the appliance.
• Do not block or cover the front and rear of the unit.
• Do not submerge the unit in water or any other liquids.
• Do not place the appliance near open flames or any other sources of heat.
• People with limited physical, visual or mental abilities or lacking proper experience
and/or knowledge should never use the device without the supervision of a responsible
person or someone who can assist in the use of the device.
OVERVIEW
Control
panel
Vent
adjustment tab
Handle
Water tank
cover
USB-C port
Rear
• Remove the water tank cover from the
top of the air cooler and fill with 400ml
of clean water.
Tip: To use the appliance as a regular
fan, do not add any water. Adding iced
water or ice to the water tank will help
improve the air cooler’s cooling
performance.
• Replace the water tank cover and
place the air cooler on a flat surface.
• Plug a USB-C cable into the back of
the air cooler and then plug the USB
cable into a power adapter, PC,
laptop or any USB power source.
Power
Turns the air cooler ON/OFF.
Fan
Adjusts fan speed (F1, F2, F3).
Timer
Adjust the timer (1-8 hours).
OPERATION
Power
Timer
Display
Fan
Setup
Control Panel
CLEANING & CARE
TROUBLESHOOTING
• It is recommended to clean the water tank twice a week. Simply add a teaspoon of
white vinegar and warm water into the water tank and rinse thoroughly.
• When you wish to store the air cooler, you must empty the water tank and run it on high
fan speed to dry out the unit before powering off.
• Use a dry cloth to clean the external surface of the air cooler. Do not use water, wax,
polish or any other chemical cleaning product.
Error Code
E2:
Warning overflow.
If the filter becomes over saturated, the air cooler will display “E2” and automatically turn
itself off. Remove the filter from the bottom of the air cooler and allow it to air dry before
replacing it. Pour out the water from the water tank and refill it with no more than 400ml of
clean water.
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For th e mo st up -to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
Loading...