SLIM POCKET VIDEO LED
FILL LIGHT
KAPKVIDLBKA & KAPKVIDLSVA
SAFETY & WARNINGS
Safety tips:
To prevent any damage to your product or personal injury, please read the following safety
precautions before operation and keep the manual for all users' reference.
Before operating this unit, please read the instructions carefully and keep them for future
reference.
• This product is not dustproof or waterproof.
• This product is a precision instrument; do not allow the product to fall to the
ground or be impacted by a collision or strong shock.
• Do not use the product in a completely closed environment, otherwise the internal
temperature may increase and lead to product failure or risk of fire.
• Do not look directly at the illuminated LEDs to avoid eye strain or injury.
• Do not use this product near heat sources or in direct sunlight for extended periods.
• Be sure to always turn the product off after use.
• Do not place the product into storage directly after use. Ensure the product has
cooled sufficiently before placing it into storage.
1. Light plate
2. OLED display
3. 1/4” mounting thread
6. Micro USB charging
input port
7. USB Type-C charging
input port
9. Three-way brightness
adjustment
OVERVIEW
4. Power switch 5. 1/4” mounting thread
8. USB 5V/2.4 A output
OPERATION
Functions
1. Turn on/off
• Press and hold the power button for 2 seconds to switch the product on.
• Press and hold the power button for 2 seconds to switch it off.
2. Brightness/colour temperature adjustment
• Once powered on, press down on the middle of the brightness switch, and the
triangular arrow on the display will adjust to point to the brightness setting.
• Roll the brightness switch upward and release; the switch will automatically
rebound, and the brightness increases by 1%.
• Roll and release the brightness switch upward three times, and the brightness will
continue to rapidly increase to the maximum (100%).
• Roll the brightness switch downward and release; the switch will automatically
rebound, and the brightness decreases by 1%.
• Roll and release the brightness switch downward three times, and the brightness
will continue to rapidly decrease to the minimum (0%).
• Press down on the middle of the brightness switch again; the triangle arrow on the
screen will point to the colour temperature.
• Roll the brightness switch upward and release; the switch will automatically
rebound, and the colour temperature will increase by 100K.
• Roll and release the brightness switch upward three times, and the colour
temperature will rapidly increase to the maximum (5600K).
• Roll the brightness switch downward and release; the switch will automatically
rebound, and the colour temperature will decrease by 100K.
• Roll and release the brightness switch downward three times, and the colour
temperature will rapidly decrease to the minimum (3200K).
3. Battery/time of use display
When powered on, the OLED display screen will show the current power and the expected
usage time. This will update accordingly when the product is outputting power to charge a
connected device.
4. Product charge
When the display shows a flashing battery icon, the product requires charging.
Insert a 5V USB adapter into an AC power socket, then insert the charger output’s Micro
USB or Type-C plug into the corresponding Micro USB or Type-C socket on the product.
The display screen will show the charging status, and the battery icon will fill as the product
charges, When the battery icon is filled, charging is complete. The recommended charging
current is 2A.
5. USB output for device charging
The product can output 5V/2.4 A via the USB port, which can be used to charge mobile
devices and other compatible items.
To charge an external device, use the USB output on the product to connect the
appropriate cable to the device. When the product detects an external device connection, it
will automatically output power to charge the external device. The product will
automatically select the most suitable current charging for the external device, up to a
current of 2.4A. When the external device is charged, the product will stop output and enter
into sleep mode.
SPECIFICATIONS
Product dimensions
Einheit: mm Tolerances: ±1.0mm L=158 W=75.8H=10
Specifications
Project
Specification
Suitable for mobile phones, cameras, live broadcast, and
small environment fill lighting.
100x 3200K colour temperature LEDs
100x 5600K colour temperature LEDs
Brightness control
0%-100%
Maximum illuminance
13SOLUX/0.5m
Colour temperature
3200K-5600K (adjustable)
Colour rendering
CRI>95
Display type
OLED
Brightness, colour temperature, power, charging status,
battery
LED output power 10W max
Charging input power: 5V/2A max 10W
Battery type
Li-Polymer
Battery specification
3.85W 4200mAh 16.2Wh
Mounting
Universal 1/4” mounting thread
Casing material
Aluminium alloy
Surface treatment
Hard anodic oxidation
Product colour
Gun grey, rose gold
Net weight
~180g
Operating temperature
0°C~35°C
Storage temperature
-10°C~50°C
Relative humidity
20%~80%
Product size
158 x 10 x 75.8mm
Scope of application
LED count
Display contents
Product power
USB output power: 5V/2.4A max 12W
NOTES
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
Loading...