A. Introduction
Thank you for purchasing this product, It is a digital pen with HD video shooting. It can shoot
and store High-quality audio & video. It has the advantage of simple operation, small
construction, elegant design and portability. It’s an indispensable device in business, education,
security, media, justice, travel, medicine, life and other fields.
B.
Product Profile
C. Instructions
After that the text will be deleted by system automatically and the time will automatically run when
you restart the machine for another recording.
To use it as a Plug-and-Play Webcam: insert Micro SD Card into the card slot, power on the pen
camera, connect it to PC by USB Cable and it will show up as a USB Pen Drive. Hold the button till
it shows as a Plug-and-Play Webcam by using skype or "amcap" to open it.
1. Turn on or off and Saving Video File:
1 - Unscrew the Pen Camera, insert the TF Card into the TF Card Slot.
2 - Press and hold the button on top of the Pen Camera for 2 seconds, then a yellow indicator light
will display. It is now powered on and in Standby. Once the indicator is light on, press and hold the
button for 4 seconds and the yellow light will flash. The Pen Camera will save the video file
automatically and shutdown.
2. Video Recording and Taking Photo:
After turning on the camera, the indicator light will be yellow. Press the button once quickly and the
camera will take one picture. At this point the light will be back to yellow again. Press the button
for 2 seconds and the yellow light will flash 3 times and go off and will then begin to take video.
Press again to stop the video and save the file. In order to ensure the document’s size and quality, the
system will save the video files automatically every 15 minutes and continue video recording.
3. Connect to Computer:At the state of being turned off or in standby, the pen can be connected
to computer. The pen will appear on the computer as a Removable Disk, which can be opened to
display the photo and video files saved there. When the camera is transferring data with the
computer, the red light will blink. When disconnecting the camera, please click the “Safely
Remove Hardware" icon which is on the lower right corner of the computer screen. After the
system has completed this operation, you can disconnect the camera from the computer.
4. Charge: connect the USB port of the computer and the camera will be charged. When the
battery is charging the yellow light will be on and the red light blink slowly. Once the battery is
full, the red light will be off.
5. Set the time: Create a “txt” file under root directory of the memory Card named “Time.txt”.
Open the "time" text document, and input the time settings string, the string is composed of
"Year-Month-Day", then a single space, followed by, " hours:minutes:seconds".
For example:
2012-08-16 13:26:20
D. Exception Handling:
When the storage space of the camera is filled up, the red light and blue light blink for about 5
seconds at the same time, it will save the present video files automatically and turn off. If you want
to use the camera again, please back-up the important video files to your computer and delete the
older files in the camera to make more space.
When the power stored in the battery is low, the red light and blue light blink for about 5
seconds alternately, it will save the present video files automatically and turn off. If you want to use
the camera again, please recharge it.
If the camera has no any response because of improper operation or other special reasons,yo u
can press the reset button with a toothpick or other non-metal bar.
E. Technical Specification
Subject Technical Specification
Video Resolution 720x480
Video Format AVI
Picture Resolution 1280*960
Picture Format JPEG
Video frame rate 30fps±1fps
Video Player The Recording file will comply with all Major video players
Image Scaling 4:3
Support system Windows ME/2000/XP/2003/Vista/7
Charging voltage DC-5V
Interface-type Mini USB port
Memory External TF card
Battery type High-capacity polymer lithium battery
F. Notes
a)
Recording Situations: please comply with the relevant state laws strictly. The product shall
not be used for illegal purposes.
b)
About the battery: The longer this product is being used, the working time of the battery will
decrease over time. If you don’t use it for long time, please recharge it fully before using.
c)
File security：The product is not a professional storage device, it won't warrant the
completeness and safety of the stored files. Please back-up the important files in your
computer or other storage device.
d)
Video quality：The product is not professional video device, so we don't assure you that the
video quality will be amazing.
e)
Working temperature：0—40
°C
。
f)
Working Humidity：20%—80%，Please don’t operate the product under a humid working
environment. Additionally, the product is not water resistant.
g)
Film intensity：In order to protect the optical device from thhard light, please don’t direct
this product to the sunlight or other strong light sources directly.
h)
Health cleaning requirements:In order to make the camera lens or other parts free from dust
and don’t affect the video quality, please don’t use it in an environment of high density of
dust. You can brush the camera lens with lens paper or eye cloth.
i)
Other issue：The product is precision electronic product, so please don’t subject it to shaking
or other forms of trauma. Please don’t use it near high magnetic fields or high electric fields.
j)
Supplement：If you have any questions, please contact Kogan.
Loading...