27" ULTRA HD 4K IPS
FREESYNC MONITOR
(3840 X 2160)
KAMN27UHFTA
Read all instructions before using the appliance and retain for reference.
• Unplug the monitor before cleaning it with a slightly damp, clean cloth.
• Wiping the screen once it has been turned off with a dry microfiber cloth is
recommended.
• Do not use cleaning alcohol or ammonia-based liquids or other harsh cleaners.
• This monitor is designed with ventilation holes on the back of the casing. Do not
cover or block them.
• Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat,
as well as in rooms lacking in adequate ventilation.
• Do not insert any objects or spray any liquids into the vents.
• Do not position the monitor in unsafe locations. If the monitor falls, it may be
damaged and may injure nearby people.
• Unplug the monitor if it is not going to be used for an extended period.
• Do not place heavy objects on the monitor, its power cord or any connected cables.
• Do not open the back panel of the monitor, as it contains a high-voltage current
even when not plugged in.
A
B
E
C
F
A. Monitor
B. Stand Connector
C. Stand Base
D. M4 x 12mm Screws (x 3)
E. Power Adapter
F. HDMI Cable
G. User Guide
D
G
Built-in stand
1. Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD
panel from being damaged. Install the bracket body to the stand base with screws。
2. Attach the stand base by pressing it on to the LCD panel.
Angle adjustment
The viewing angle of the built-in stand can be adjusted forward 5° or backward 15° for a
comfortable viewing experience.
Note:
• The above illustrations are for reference only.
• Take care not to touch the screen area when adjusting the angle of the monitor.
Wall mount:
VESA mount
Before installing this monitor on a desk or wall mount, make sure to detach the stand.
Consult a professional technician for wall mount installations. Kogan accepts no liability for
installations not performed by a professional technician.
To ensure sufficient ventilation, Install the monitor at least 10 cm away from the wall and
leave about 10 cm of space at each side of the monitor.
1. Place a clean, dry and lint-free cloth on a flat, stable surface.
2. Gently lay the monitor on the cloth with the LCD screen facing down.
3. Identify the four wall mounting screw holes on the back of the monitor.
4. Install the wall mounting bracket (not supplied) on the back of the monitor and
attach the monitor to the wall according to the mounting bracket's instructions.
5. Make sure that all screws (not supplied) are tightened and secured properly.
Note:
• Ensure the wall mounting bracket and screws conform to VESA standards.
• For more information, refer to the user manual for the wall mounting bracket.
(A x B) 100 x 100 mm
Screw size:
M4 x 12 mm
HDMI Cable (included)
HDMI O UTPUT
Turn off the PC and the monitor before connecting them.
HDMI
Connect an HDMI cable from your PC to the monitor.
PC
DisplayPort
DP Cable (not included)
DP OUTPU T
Earphones (not included)
Power Cable
Connect a DisplayPort cable from your PC to the monitor.
PC
3.5mm Audio Out
Earphones or speakers can be connected to receive sound output from your monitor. Note
that the sound output on your PC must be set to the monitor.
Power Cable
Connect the included power cable to the monitor power port, then connect the other end
into a power outlet.
HDMI Connector
Setup
1. Connect your PC to the monitor using the included HDMI cable.
2. Connect the power cable to your monitor then connect the other end to your power
source. It is recommended that you use a surge protector with adequate voltage if
a wall outlet cannot be reached directly.
3. Locate the power button on the monitor and press it to turn the monitor on.
FreeSync
The feature itself is on by default when setting 60Hz refresh rate. In order to use this feature,
note you must have hardware with FreeSync capability, an HDMI cable and the latest
graphic drivers.
Connect to the monitor using an HDMI cable. After connecting, you may receive a prompt
to enable the feature on your computer. If you do not receive the prompt, you may need to
enable the function in your graphics card menu. See your graphics card manufacturer' s
documentation for instructions on how to turn on and/or enable FreeSync.
Controls
LED indicator
Monitor status
Red
Standby mode / No signal
No light
Power off
You can easily control the functions of the monitor through the control buttons.
LED Indicator: Changes colors to indicate status.
The below table shows the monitor status indicated by the indicators.
Blue Power on
E Exit Button: Press to exit.
▲Up Button: Press to move up in the menus.
▼Down Button: Press to move down in the menus.
M Menu Button: Press to display the OSD menu or enter sub-menus.
Power Button: Press to turn the monitor on/off.
OSD menu
1. To view the OSD menu, press the control button at the bottom right of the
monitor.
2. Use the buttons (E, ▼, ▲, M, ) to configure options.
3. To return to the previous menu to set other menu items, press E.
4. Press E to exit the OSD menu.
Main Menu Sub-Menu Options Description
DP N/A
Input
Source
Brightness/
Contrast
HDMI 1 (1.4) N/A
HDMI 2 (2.0) N/A
Brightness 0~100 Adjust display brightness
Contrast 0~100 Adjust display contrast
DCR On, Off Turn DCR function on/off
Select input
Color
Setting
Gamma 1.8, 2.0, 2.2, 2.4, 2.6 Set gamma
Picture Mode
Standard, Photo,
Movie, Game
Set visual mode
Color
Temperature
Hue 0~100 Adjust display hue
Saturation 0~100 Adjust display saturation
Sharpness 0~100 Set display sharpness
Normal, Warm,
Cool, USER
Adjust color temperature
Picture
Quality
Setting
Audio
Response Time
Noise Reduction
Super
Resolution
Dynamic
Luminous
Control
Mute On, Off Turn mute mode on/off
Volume 0~100 Adjust audio volume
Audio Source
Multi-Window
Off, High, Middle,
Low
Off, High, Middle,
Low
Off, High, Middle,
Low
On, Off
Auto Source, DP,
HDMI 1 (1.4),
HDMI 2 (2.0)
Off, PIP Mode, PBP
2Win, PBP 3Win,
PBP 4Win
Set screen response time
Reduce noise caused by signal
source interference
When the resolution of the display
screen is low, this function can be
turned on to enhance the image
resolution.
Turn dynamic luminous control
on/off
Select audio signal input via HDMI
or DisplayPort
Select PIP/PBP modes according to
the number of input signals etc.
Sub Win2 Input
Multi-
Window
Sub Win3 Input
Sub Win4 Input
PIP Size
DP, HDMI 1 (1.4),
HDMI 2 (2.0)
Small, Medium,
Large
Select according to input signal for
PIP/PBP mode
Adjust the PIP/PBP window size
Top Left,
PIP Position
Swap N/A Swap the PIP/PBP signal sources
Language
OSD H-Position 0~100 Adjust the OSD’s horizontal position
Bottom Left,
Top Right,
Bottom Right
English, 简体中
文,한한한, Pусский,
Español, 日本語,
Français
Adjust the PIP/PBP window position
Set OSD language
OSD
Other
OSD V-Position 0~100 Adjust the OSD’s vertical position
OSD
Transparency
OSD Timeout 5~60 Set how long the OSD remains
OSD Rotation
FreeSync
[Adaptive Sync]
Reset N/A Reset monitor configurations
0~100 Adjust the OSD transparency value
Normal, 90, 180,
270
On, Off Turn FreeSync on/off
Set OSD rotation direction
Model
KAMN27UHFTA
Screen Size
27"
Aspect Ratio
16:9
Backlight
E-LED
Brightness
Panel
IPS
Resolution
3840x2160
Refresh Rate
60Hz
Response Time
5ms
Viewing Angle
≥178°(H) / 178°(V)
Contrast Ratio
1000:1
VESA Mounting
100 x 100mm
Colours
1.07B
FreeSync
YES
Signal Input
DP (x1), HDMI 1.4 (x1), HDMI 2.0 (x1)
Power
DC 12V 3A
Audio
Speakers
NO
Audio Out
YES
Additional Functions
Low Blue Light
NO
Flicker Free
YES
Physical Dimensions
Dimensions (w. Stand)
613.4 x 190.89 x 452.6 mm
Dimensions (w/o Stand)
613.4 x 41 x 364.95 mm
Net Weight
5.7kg
Gross Weight
250cd/m²
6.9kg
Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com
Loading...