Kogan KALED40XXXTB User Manual

Contents
Caution
Safety Information
Names of each part
Front View
1.
Accessories
2.
.
3
Remote Control
Basic Operation
OSD Menu
1. Picture menu
Sound
2.
3. Channel menu
4. Feature menu
5. Setup menu
Multimedia Operation
Important Unique Buttons
menu
1
-
3
2
4 - 5
4 4
5
6 - 7
-
8 9
10-15
10 11
12 13 14-15
16-18
19
Teletext
Trouble shooting
Specifications
20
-
21 22
23
Caution
_________
1
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude
The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE) Your product is designed and manufactured with high quality materials
and This symbol means that electrical and electronic equipment, at their
end-
Please dispose of thisequipment at yourlocal community wastecollection/ recycling center.
to constitute a risk of electric shock to the persons.
components which can be recycled and reused.
of-life should be disposed of separately from your household waste.
directives.
Safety Information
_________
2
To ensure reliable and safe operation of this equipment, please carefully read all the instructions in this user guide, especially the safety information below
Electrical safety
v To prevent overload, don't share the same mains supply socket with too many other items of equipment.
- Do not place any connection wires where they may be stepped on or tripped over.
- Do not place heavy items on the leads, which may damage them.
- Hold the Mains plug, not the wires, when removing from a socket.
- During a thunderstorm or while leaving the TV for long periods, disconnect the (if outdoor) and mains power from the supply.
aerial
- Do not allow water or moisture to enter the TV. Do NOT use in wet
or moist areas such as bathrooms, steamy kitchens or near swimming pools. v8]TT\PMXT]OW]\QUUMLQI\Ml y, and seek professional help if:
- the mains plug or cable is damaged.
- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.
- anything accidentally penetrates the ventilation slots.
- the set does not work normally.
- Do NOT remove the safety covers.There are no user serviceable parts inside.
You may invalidate the warranty. Qualified personnel only are permitted to service this apparatus.
- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.
- Do NOT break open or throw exhausted batteries on a fire.
.
Physical safety
v,W67T block ventilation slots in the back cover. . You may place theTV in a cabinet, but ensure at least 5cm (2") clearance all around the unit. v,W67T tap or shake the TV screen, you may damage the internal circuitry. . Take good care of the remote control, do not drop it or allow it to come into contact with liquids. v<WKTMIV\PM<>][MI[WN\LZaKTW\P,W67<][M[WT^MV\[Wr petrol based fluids. For stubborn stains, you may use a damp soft cloth with diluted detergent.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice.
Safety Information
_________
3
IMPORTANT INFORMATION
a. Use cabinets or stands recommended by the manufacturer of the television. b. Only use furniture that can safely support the television. c. Ensure that the television is not overhanging the edge of the supporting furniture. d. Do not place the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support. e. Do not stand the television on cloth or other materials placed between the television and supporting furniture. f. Educate children about the dangers of climbing on furniture to reach the
television or its controls. g. The television must to be positioned in a horizontal, stable, un-slippery plane to avoid sliding.
Names of each part
_________
4
Front View
Turn on/standby the TV set.
:
: To switch the signal source.
MENU: Display/exit the OSD menu.
VOL+-: Adjust the volume.
+ CH - : Scan through channels.
POWER
INFO
i
3
1
2
5
6
4
8
9
7
SOURCE
AUDIO
?
I/II
0
EXIT
MENU
ENTER
INDEX
LIST
EPG
SLEEP
STILL
RADIO
SUBTITLE
DMP
Remote Control
Names of each part
_________
5
Back View
9
8
3 (ARC)
7
2
7
1
1
1
2
YPbPr
3
4
PC
2
3
4
5
6
7
HDMI
8
USB
5
7
6
9
AV/YPbPr R/L
Remote Control
_________
6
Remote Control
The buttons of the remote control are as following:
: Power, switch on or off TV set.
1.
2. INFO: Press to display the current program information on the screen.
i
: Go to the index page.
3.
: Press to mute or restore sound.
4. NUMBER BUTTONS: Choose channels or password entry.
5. SOURCE: Press to select signal source.
?
: Reveal the hidden information of
some teletext pages.
0
6. AUDIO (I/II): The button can be used to switch between NICAM DUALⅠ/ NICAM DUAL/ NICAM DUALⅠ+Ⅱ /MONO and switch Audio language in
DTV mode. MENU: Press to enter the menu screen
7. for various optional adjustable settings.
8.
EXIT
//◄/: To select the direction.
9.
ENTER: Press to execute the selected
10. item in the menu screen or enter the desired value in any input mode.
11.
INDEX: Press to enter the Recorded list. (In DTV mode)
12.
LIST: Press to call up the channel list.
26
25
27
Press again to exit it.
13.
CH+/CH-: Press to select channels in
ascending or descending order.
14.
VOL+/VOL-: Press to adjust the volume level up or down. SLEEP: Press to set the sleep timer.
15.
When the preset length of time has
passed, the TV set enters standby mode.
16.
: Switch on/off the favorite programs
17. EPG: Electronic Program Guide, used in
the DTV mode.
18.
: Return to last viewed program.
Exit OSD Menu.
:
list.
Remote Control
_________
7
Remote Control
0
25
19. COLOUR BUTTONS: Red/ green/ yellow/ blue key navigation link.
: Fast reverse (in USB mode). : Fast forward (in USB mode). : Previous (in USB mode). : Next (in USB mode).
20. STILL: Press to hold the picture. : Hold the teletext page on display,
press again to release.
: Stop (in USB
: Enter the Teletext, press again for
21.
MIX mode, press this button again to exit.
: Play / Pause (in USB
RADIO: Press to interchange Radio and
22.
DTV programs when there is Radio
program (In DTV mode).
23.
24.
25.
26 27
26.
27.
: Press to select different images
: Change size of teletext screen in
display mode.
: Enter subtitle mode or subpage.
: Cancel the teletext but not to exit
teletext, press again to exit.
DMP: Press to switch to the USB source.
: Press button to start recording.
(In PVR mode).
mode/PVR mode).
mode).
sizes.
NOTE:
All pictures in this manual are examples, only for reference, actual product may differ
from the pictures.
Any buttons not mentioned here are not used.
Basic Operation
_________
8
QUICK START GUIDE
• Connection
1. Connecting the mains and antenna.
2. Press Power button on the remote to turn on the TV.
• First Time Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings.
OSD Language Press the/button to select the desired OSD (On Screen Display) language.
Mode Setting Press the/button to select Home Mode or Store Mode.
Country Press the/button to select the country.
Auto Scan
Press the◄/►button to select mode: DTV+ATV, DTV, ATV.
Turning on and off
• Turning the TV on
Connect the AC input cable. button on remote control can turn on TV
• Turning the TV off
Press the button on the remote control to enter standby mode. Do not leave your set in standby mode for long periods of time. It is best to unplug the set from the mains and aerial.
• No signal
There is No Signal menu on screen when there is no input signal. In ATV/DTV mode, if there is no signal in 15 minutes, the TV will turn off automatically. In PC mode, the TV
set will automatically turn off in 5 minutes with no input signal. When VGA cable is
connected, the TV turns on automatically.
Programme Selection
• Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number. Press CH - to decrease channel number.
• Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
• Example
To select - channel (e.g. Channel 5): Press 5. To select -- channel (e.g. Channel 23): Press 2 and 3 within a short time.
If TV has a power switch, turn it on firstly.
from standby mode.
Press the
Basic Operation
_________
9
Volume adjustment
Press the VOL+/- button to adjust the volume.
If you want to switch the sound OFF, press the .
You can release mute by pressing the Changing the Input Source
You can select the input source by pressing the SOURCE button on the remote control. Press the▲/▼button to cycle through the input sources, and press the ENTER button to
confirm your choice.
How to Navigate Menus
Before using the TV follow the steps below to learn how to navigate the menus in order to select and adjust different functions. The access steps may differ depending on the selected menu.
1. Press the MENU button to display the main menu.
2. Press the◄/►button to cycle through the main menu.
3. Press the▲/▼button to select the desired sub item.
4. Press the ENTER button to access the submenu.
5. Press the ▲/▼/◄/► button to select the desired value. The adjustment in the
OSD may differ depending on
6. Press the MENU button to return to the previous men
7. Press the EXIT button exit from the menu.
NOTE:
When an item in MENU is displayed gray, it means that the item is not availa
cannot be adju
Buttons on the TV have the same function as corresponding buttons on the remote
control. If your remote control is lost or will not work, you may TV to select menus. This manual focuses on oper
Some items in the menus may be hidden dependi
used.
sted.
the selected menu.
or increase the volume.
u.
ble or
use the buttons on the
ations of the remote control. ng on modes or signal sources
OSD Menu
_________
10
Configuring the Picture Menu
• Picture Mode
You can select the type of picture that best corresponds to your viewing requirements.
• Brightness
Adjusts the base level of the signal in the picture.
• Contrast
Adjusts the signal level between black and white in the picture.
• Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
• Saturation
Adjusts intensity of all colours.
• Hue (Only available in NTSC mode)
Adjusts the balance between red and green levels.
• Colour Temp
Select the colour temperature of the picture.
• Aspect Ratio
You can select the picture size which best corresponds to your viewing requirements.
• PC Setting (In PC mode)
Auto Adjust: Adjust the image automatically. H Position: Centre the image by moving it left or right. V Position: Centre the image by moving it up or down. Phase: Minimize horizontal distortion. Clock: Minimize vertical stripes in the screen image.
• Advanced Settings
NR: Set options to reduce video noise. MPEG NR: Set options to reduce MPEG noise. Dynamic Contrast: Automatically adjust picture detail and brightness.
OSD Menu
_________
11
Configuring the Sound Menu
• Sound Mode
You can select a sound mode to suit your personal preferences.
• Treble
Adjust the treble effect. Increases or decreases high-pitched sounds.
• Bass
Adjust the bass effect. Increases or decreases lower-pitched sounds.
• Balance
You can adjust the sound balance of the speakers to preferred levels.
• Surround Sound
You can select a desired Surround Sound mode.
• EQ Setting
Adjust the curve of 7 ban EQ Mode: Only in User mode, the followi
120Hz/300Hz/500Hz/1.2KHz/3.0KHz/7.5KHz/10KHz: Adjusts the level of specific bandwidth frequencies.
Based on your favourites about which frequency band need to be adjusted, make small adjustment with certain frequency band at a time. We suggest NOT making too large changes.
• AVL
AVL automatically remains o Because each broadcasting station has its own signal cond may be needed every time when the channel is changed. This feature allows users to enjoy stable volume levels by making automatic adjustments for each program.
• SPDIF You can select a desired SPDIF Output mode.
• Audio Description (In DTV mode)
Press the▲/▼button to sel sub-menu. Press the▲/▼ buttons to select Mode, then press the ◄/► buttons to select On, Off. When the mode is On, Volume can be adjusted by users.
• Sound Type (In DTV mode)
Press the▲/▼buttons to select Sound Type, then press the ◄/► buttons
ds equalizer.
ng can be manually adjusted.
n the same level of volume if you change programmes.
itions, volume adjustment
ect Audio Description, then press the button to enter
to select.
OSD Menu
_________
12
Configuring the Channel Menu
• Auto Scan
Press the ENTER button to enter sub-menu.
Country: Press the◄/►button to select country.
Mode: Press the◄/►button to select Mode: DTV+ATV, DTV, ATV. Start: Press the ENTER button to start the
auto searching.
• Manual Scan Press the ENTER button to enter sub-menu.
- Digital Manual Scan: Press the/button to select the Digital Manual Scan, then
press the ENTER button to enter sub-menu. Digital Scan: Press the◄/►button to select the channel number.
Start: Press the ENTER button to start the channel searching. Frequency: Display the frequency of current TV signal. Strength: Display the quality of current TV signal.
- Analog Manual Scan: Press the▲/ button to select the Analog Manual Scan, then press the ENTER button to enter sub-menu. Analog Scan: Press the◄/► button to select Analog Scan. Channel to Save: Press the◄/► button to select channel. Color System: Press the◄/► button to select Color System. Sound System: Press the◄/► button to select Sound System. AFC: Press the◄/► button to select On or Off. Start: Press the ENTER button to start the channel searching.
• Channel Edit
First press the▲/▼button to highlight the channel you want to delete or skip or swap, then: Press the red button to delete the channel. Press the green button to skip the select channel. (Your TV set will skip the channel automatically when using CH+/- to view the channels.)
Press the yellow button to rename the channel.
Press the blue button to set the channel to moving state, then press the▲/▼buttons to move it to the position you want to put it.
• Signal Information (In DTV mode)
Display the current Signal Information.
(In ATV mode)
OSD Menu
_________
13
Configuring the Lock System Menu
• Enter Password
The following items are only available if the password input is correct. Default password is 0000, and if you forget what you set, please call the service c
Enable
Channel Locks Keypad are available when Enable is On.
Channel Locks
Press▲/▼to sele to lock, then press ENTER to set it to lock.
Parental Rating
Press the▲/▼but
Lock Keypad
Set to prevent i
New Password
Press the▲/▼bu to set, twice.
Clear Lock
Restore the L
, Parental Rating and Lock
ct the channel you want
tons to select Parental Rating, then press ◄/► buttons to select.
t from being used by young children, or other unexpected usage.
tton to select New Password, then enter a 4-digital number you want
ock System settings to the factory default.
enter.
OSD Menu
_________
14
C
onfiguring the Setup Menu
• OSD Language
Select your prefer Display language.
Audio Languages (In DTV mode)
Select your preferred (Available for digital channels if multiple audio languages are broadcast.)
Press the▲/▼button to select Audio Languages, then press ENTE to enter sub-menu. Press the arrow button to select the
Audi
o Primary Language and Audio
Secondary Language.
Subtitle (In DTV mode)
Press the Press the▲/▼ buttons to sel Press the arrow button to select the Subtitle Primary Language and Subtitle Secondary Language. Press the▲/▼ buttons to select Hearing Impaired, then press◄/►buttons to select On or Off.
Teletex
t
Adjust Te Press the▲/▼button to select Teletext, then press ENTER button to e Under DTV source, press◄/►button to select Digital Teletext Language. Under ATV source, press◄/►button to select Decoding Page Language.
• Mode Setting
Press◄/►button to select E-POP mode or Home Mode.
Time Settings
Press the▲/▼b sub-menu. OSD Time: Select On-Screen Menu displaying time. Sleep Timer: Select the time to turn the TV to standby mo Auto Sleep: Select the Auto Sleep time you want. Time Zone: Select your time zone.
sub-menu. Set Auto Sync to Off, then Note: In the case of total loss of power, the clock setting will be lost.
HDMI CEC Control
enter
Press the▲/▼button to select
On or Off.
Press the▲/▼button to select
/ buttons to select Subtitle, then press ENTER button to enter sub-menu.
letext settings. Only available under DTV and ATV source.
sub-menu.
red On Screen
audio language.
R button
ect Mode, then press◄/► buttons to select On or Off.
nter sub-menu.
utton to select Time Settings, then press ENTER button to enter
de automatically.
t Time, then press Time: Press the▲/▼button to selec
you can set the time manually.
utton to selectPress the▲/▼b
HDMI CEC Control, then press ENTER button to
HDMI CEC Control,
ARC,
then press◄/►button to select
ENTER button to enter
then press◄/►button to select
On or Off.
OSD Menu
_________
15
• PVR Settings (In DTV mode)
Press the▲/▼button to sel sub-menu. It will check the USB.
File Manager: To disp Replay: Press the red button to replay a video. Delete One: Press the green button to delete a vide Delete All: Press the yellow button to delete all videos. Zoom In:
Device List: When multiple recording devieds are connected, th are listed. Select one recording device in the Device List. Format: Press the red button to format USB disk.
Scheduled Record: To set the parameters for sch Press the ENTER button to set the parameters for recording. Delete One: Press the green button to delete a video. Delete
D
1. Insert a USB disk. Press recordi
2. Press button to stop recording, it will return to normal b
NOTE:
USB d Please form During the Device formatting, do not disco
If PVR recording system is used all the time, it will ex USB memory must support USB Some nonstandard USB devices may not be supported.
First Time Setup
This is a guide to h
Reset
Restore
Press the blue button to zoom in the video.
All: Press the yellow button to delete all video.
igital program recording
ng, press button to zoom in/out the record menu.
isk must at least be of 512MB capacity.
at the inserted USB disk when it
progress. If you format the device, all files will be deleted. Before formatting y device to the TV, please back up your files to prevent them from damage or loss o data.
When an USB device has several partitions,the PVR system can help to choose anyone
of them to perform recording.
elp you to setup the TV.
the system settings to the factory default.
ect PVR Settings, then press ENTER button to enter
lay the Recorded list.
o.
e recording devices
eduled recording.
button to record the current program. During the
roadcast television.
could not be recorded to.
nnect the device while formatti
it PVR system automatically.
2.0 high-speed transfers.
ng is in
our
f
Multimedia Operation
_________
16
Me
sing USB mode U
• To Access/Quit USB mode
1. Connect a USB device.
2. Press SOURCE button to
display the main menu. Use the ▲/▼ to highlight USB,
and the ENTER button to access the USB mode.
3. u to exit from the USB mode.
You may also use the signal source selection men
NOTE:
Special USB
devices may be not or well supported.
USB max. Load: DC5V 500mA
• he formats supported
T
(AVC) H.264
MP MPEG-2
el 4 HP@Lev
MP MPEG-2
MP MPEG-2
Decoder e Aud
MPEG-1 Layer 2 MPEG-1 Layer 3 MPEG-2 Layer 3 AC3
LC AAC­HE-AAC V HE-AAC V2
MP@Level 4
1
MPGE1/MPEG2/M PEG4: Up to 1080p @ 30F H.264: Up to 1080p @ 25F AAC: AAC-LC(type
2), HE-AAC v1(type 5,SBR), HE-AAC v2(type 29,SBR+PS)
Notes
Multimedia Categories
Movie
File Extensi
MPEG(*.mpeg,
*.mpg, *.dat, *vob)
MPEG-4(*.mp4)
TS(*.ts, *.trp, *tp)
MKV(*.mkv)
*.avi
*.flv
on
Video Decod io Decode
MPEG-1
MPEG-4 SP MPEG-4 ASP MPEG-4 XVID DivX
MP@Level 4
H.264(AVC)
MPEG-1 MP MPEG-2 MP MPEG-4 SP MPEG-4 ASP MPEG.-4 XVID H.264(AVC) MP@Level 4 H.264(AVC) HP@Level 4 MPEG-1
H.264(AVC)
H.264(AVC) HP@Level 4 MPEG-1
MPEG-4 SP MPEG-4 ASP MPEG-4 XVID H.264(AVC) MP @ Level 4 H.264(AVC) HP @ Level 4 H.264(AVC) MP @ Level 4 H.264(AVC) HP @ Level 4
Multimedia Operation
_________
17
Me
Bit Rate: up to 320Kbps Sample Rate: 32KHz, 44 48KHz
72x72 < B seline resolution < 7680x4320 Photo Progressive Mod
ze <=1280x1024
Si File Size <=10MB
File Size <=1MB
*.mp3
Music
AAC(*.aac,*m4a)
*.wav
*.jpg
*.jpeg
Text *.txt
No x 500 files su d each folder. te: Ma pporte
N
OTE:
l algorithm documents may n Specia
MPEG-2 Layer 3
Baseline Mode
Progressive Mode
ot be or well be supported by the USB.
MPEG-1 Layer 3
AAC HE-AAC V1
C V2
HE-AA LPCM ADPCM
TF-8
U UNICODE ASCII
The USB supports the formats mentioned above, if the file format is not supp change it to the given format.
ain Operating Interface M
.1KHz,
a
e
orted,
Use the ◄/► button to select Photo, Music, Movie or Text. Press ENTER button enter into sub-menu.
Multimedia Operation
_________
18
Me
hoto
P
Press th enter. Press t enter. Press t Press the INDEX button to access to the Use the arrow buttons to highlight the folder, and then press Use the arrow buttons to highlight a file, and then press the button to play. Press the Press the EXIT button to back to the previous menu.
M
Press th enter. Press t enter. Press t Press the INDEX button to a Use the ▲/▼ button to highlight the folder, and then pr Use the ▲/▼ button to highlight a file, and then press the button to play. Press the Press the EXIT button to back to the previous menu.
M
Press th enter. Press t enter. Press t Press the INDEX button to a Use the ▲/▼ button to highlight the folder, and then pr Use the ▲/▼ button to highlight a file, and then press the button to play. Press the Press the EXIT button to back to the previous menu.
T
Press enter. Press t enter. Press t Press the INDEX button to access to the Use the ▲/▼ button to highlight the folder, and then pr Use the ▲/▼ button to highlight a file, and then press the button to play. Press the EXIT button to back to the previous menu.
e ◄/► button to select Photo in the main menu, then press ENTER button to
he ◄/► button to select disk you want to watch, then press ENTER button to
he CH+/- button to change page.
quick menu.
the ENTER button.
to stop the playing files.
usic
e ◄/► button to select Music in the main menu, then press ENTER button to
he ▲/▼ button to select disk you want to watch, then press ENTER button to
he ◄/► button to change page.
ccess to the
to stop the playing files.
ovie
e ◄/► button to select Movie in the main menu, then press ENTER button to
he ▲/▼ button to select disk you want to watch, then press ENTER button to
he ◄/► button to change page.
ccess to the
to stop the playing files.
ext
the ◄/► button to select Text in the main menu, then press ENTER button to
he ▲/▼ button to select disk you want to watch, then press ENTER button to
he ◄/► button to change page.
quick menu.
ess the ENTER button.
quick menu.
ess the ENTER button.
quick menu.
ess the ENTER button.
Important Unique Buttons
_________
19
PROGRAM GUIDE (In DTV mode) Press the EPG button to enter PROGRAM GUIDE menu.
ttons
Press the appointment to record you want. The unit is able to do schedule recording when TV is turning on or in standby mode. When recording starts in standby mode, there will be no picture or sound from the unit. Press the red button to view the previous day’s guide. Press the green button to view the next day’s guide. Press the yellow button to display the EPG Schedule List. Press the blue button to book program. Press the EXIT button to exit.
Channel List
Press LIST button to display the Channel List. Press ▲/▼ to select the items. Press ENTER button to enter the channel. Press / button to page up or down the Channel list. Press EXIT button to exit.
Favorite List
Press button to display the favorite list. Press the red button to delete the selected favorite program. Press the green button to add the current program to the favorite list. Press ▲/▼ to select the items. Press / button to page up or down the Favorite list. Press ENTER button to enter the channel. Press EXIT button to exit.
button to set the parameters for recording. You can choose the time of the
Teletext (Not available in Australia currently)
_________
20
Using the teletext feature
• Display teletext
1. Select a TV station with a teletext signal.
2. Press the
3. Press the superimpose the teletext page over the TV program.
4. Press the
• Page selection
1. Enter the page number (three digits) using the number buttons. If you press a
wrong number during input, you must complete the three digit number and then reenter the correct page number.
2. The CH-/CH+ button can be used to select the preceding or following page.
• Hold
You can press
• Index
Press the
• Enlarging Text
When a page is displayed, you can double the size of the text to make it easier to read.
1. Press the
2. Press the
3. Press the
• Reveal mode
You can display concealed teletext information (e.g. Answer to puzzles or riddles etc.) by pressing display.
• Subpage
Some teletext may contain several sub-pages which are automatically paged in a certain cycle by the TV station.
1. Yon can enter into a certain sub page by pressing the button directly and
select the page number with number buttons. Enter the sub page number (e.g. 0003) for the third sub page.
2. Press the button again to exit the sub page mode.
• Colour buttons (Red, Green, Yellow and Blue)
Press these buttons to access directly to the corresp the lower part of the teletext screen.
button to enter teletext mode.
button twice to enter Mix mode. This function enables you to
button a third time to return or exit to the normal ATV/DTV mode.
button to hold a page, and press it again to release the page.
the
i
button to enter the main index page directly.
button to enlarge the top half of the page. button again to enlarge the bottom half of the page. button once more to return to the normal display.
?
button. Press ? button again to remove the information from the
onding colour pages displayed at
Trouble shooting
_________
21
Troubleshooting
Before contacting the customer service team, perform the following simple checks. If any problems persist, unplug the TV and calling for serving.
PROBLEM POSSIBLE SOLUTION
- Check whether the main plug has been connected to a wall outlet.
No sound and picture
Normal picture but no sound
The remote control does not work
Power is suddenly turned off
Picture appears slowly after switching on
No or poor colour or poor picture
Horizontal/vertical bars or picture shaking
Poor reception on some channels
Lines or streaks in pictures No output from one of the speakers
- Check whether you have pressed the POWER button on the front of TV set.
- Check the picture contrast and brightness settings.
- Check the volume.
- Sound muted? Press the MUTE button.
- Try another channel, the problem may be with the broadcast.
- Are the audio cables installed properly?
- Check to see if there any object between the product and remote control Causing obstruction.
- Are batteries installed with correct polarity (+ to +,
- to -)?
- Correct remote operating mode set: TV, VCR etc.?
- Install new batteries
- Is the sleep timer set?
- Check the power control settings. Power interrupted.
- No broadcast on station tuned with auto activated.
- This is normal, the image is muted during the product startup process. Please contact the customer
service team if the picture does not appear on the screen within five minutes.
- Adjust the colour in menu option.
- Keep a sufficient distance between the product and the VCR.
- Try another channel, the problem may be with the broa
dcast.
- Are the VIDEO cables installed properly?
- Activate the any function to restore the brightness of the picture.
- Check for local interference such as an electrical appliance or power tool.
- Station or cable product experiencing problems. Tune to another station.
- Station signal is weak, reorient antenna to receive weaker station.
- Check for sources of possible interference.
- Check the antenna (Change the direction of the antenna).
- Adjust balance in menu option.
Trouble shooting
_________
22
NOTE:
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning.
Cleaning the screen
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then used it to wipe the screen.
2. Make sure the excess water is off the screen, an on your TV.
Cleaning the cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
There is a problem in VGA mode (Only VGA mode applied).
PROBLEM POSSIBLE SOLUTION
- Adjust resolution, horizontal frequency, or vertical frequency.
The signal is out of range.
Vertical bar or stripe on back ground & Horizontal Noise & Incorrect position. Screen colour is unstable or single colour.
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a good idea to unplug the power cord to protect against possible damage from lightning or power surges.
- Check it whether the signal cable is connected or loose.
- Check the input source.
- Work the auto configure or adjust clock, phase, or H/V position.
- Check the signal cable.
- Reinstall the PC video card.
d then let it air-dry before you turn
Disposal of old electrical appliances
The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected. Consumers should contact their local authority or retailer for information concerning the correct disposal of their old appliance.
Specifications
Techincal Specifications
TV
TV System
Screen
Resolution 1920 x1080 pixels (RGB)
Aerial input 75
Max Power Consumption
size 40" (diagonal)
PAL/SECAM B G/DK
65W
23
Instructions for the anti-overturning bracket:
1.The flat panel can overturn due to any external force, as shown in the following figure, which shall be prevented.
2. It is required to install 2 brackets on the rear cover of the flat panel.
Bracket×2 Screws×2
3. Finally, the flat panel is assembled as shown in the following figure, to prevent from overturning due to any external force.
Remarks:
1.Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall.In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the user manual.
2.The flat panel can only be placed on a flat surface with a size larger than that of the flat panel, and the supporting brackets on both sides must be located in the flat surface, and the 2 brackets must be fixed with the screws to the left and right side of the rear cover of the flat panel respectively.
3. The above figures are for reference only, and the physical flat panel shall govern.
4. Any issue related to safety shall be the liability of the user in case that the product is not set up in accordance with the requirements in the instruction manual.
24
Loading...