.$/(';;;7$
USER MANUAL
Contents
Caution
Safety Information
Names of each part
Front View
1.
Accessories
2.
.
Back View
3
Remote Control
Basic Operation
OSD Menu
1. Picture menu
Sound
2.
3. Channel menu
4. Feature menu
5. Setup menu
Multimedia Operation
Important Unique Buttons
menu
1
2
3 - 4
3
3
4
5 - 6
-
7 8
9 -14
9
10
11
12
13-14
15-17
18
Teletext
Trouble shooting
Specifications
19
-
20 21
22
Caution
_________
1
The lightning flash with arrowhead symbol, within an equilateral triangle
is intended to alert the user to the presence of un-insulated “dangerous
to constitute a risk of electric shock to the persons.
The exclamation point within an equilateral triangle is intend to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
Correct disposal of this Product
(Waste Electrical & Electronic Equipment (WEEE)
Your product is designed and manufactured with high quality materials
and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their
of-life should be disposed of separately from your household waste.
end-
Pleasedisposeof this equipmentat your local communitywastecollection/
recycling center.
directives.
Safety Information
_________
2
To ensure reliable and safe operation of this equipment, please read carefully all the
instructions in this user guide, especially the safety information below
Electrical safety
v To prevent overload, don't share the same mains supply socket with too many other
items of equipment.
- Do not place any connecting wires where they may be stepped on or tripped over.
- Do not place heavy items on the leads, which may damage them.
- Hold the Mains plug, not the wires, when removing from a socket.
- During a thunderstorm or while leaving the TV for long periods, disconnect the
(if outdoor) and mains power from the supply.
aerial
- Do not allow water or moisture to enter the TV . Do NOT use in wet
or moist areas such as Bathrooms, steamy kitchens or near swimming pools.
v8]TT\PMXT]OW]\QUUMLQI\Ml y, and seek professional help if:
- the mains plug or cable is damaged.
- liquid is spilt onto the set, or if it is accidentally exposed to water or moisture.
- anything accidentally penetrates the ventilation slots.
- the set does not work normally.
- Do NOT remove the safety covers.There are no user serviceable parts inside.
You may invalidate the warranty. Qualified personnel only are permitted to service
this apparatus.
- To avoid battery leakage, remove exhausted batteries from the remote control
handset, or when not using for along period.
- Do NOT break open or throw exhausted batteries on a fire.
.
Physical safety
v,W67T block ventilation slots in the back cover. You may place theTV in a cabinet,
but ensure at least 5cm (2") clearance all around the unit.
v,W67T tap or shake the TV screen, you may damage the internal circuitry . Take good
care of the remote control, do not drop it or allow it to come into contact with liquids.
v<WKTMIV\PM<>][MI[WN\LZaKTW\P,W67<][M[WT^MV\[WZ petrol based fluids. For
stubborn stains, you may use a damp soft cloth with diluted detergent.
Figures and illustrations in this User Manual are provided for reference only
and may differ from actual product appearance. Product design and
specifications may be changed without notice.
Names of each part
_________
3
Front View
Turn on/standby the TV set.
:
: To switch the sigal source.
MENU: Display/exit the OSD menu.
VOL+-: Adjust the volume.
+ CH - : Scan through channels.
POWER
INFO
i
3
1
2
5
6
4
8
9
7
SOURCE
AUDIO
?
I/II
0
EXIT
MENU
ENTER
INDEX
LIST
EPG
SLEEP
STILL
RADIO
SUBTITLE
DMP
Remote Control
Names of each part
_________
4
Back View
10
9
8
8
8
7
1
2
3
4
1
L/R Audio in
YPbPr
2
3
4
5
PC
6
7
HDMI
8
5
6
9
USB
10
Remote Control
_________
5
Remote Control
The buttons of the original remote control are as following:
: Power, switch on or off TV set.
1.
2. INFO: Press to display the current
program information on the screen.
i
: Go to the index page.
3.
: Press to mute or restore sound.
4. NUMBER BUTTONS: Choose channels
or password importation.
5. SOURCE: Press to select signal source.
?
: Reveal the hidden information of
some teletext pages.
0
6. AUDIO (∞I/II): The button can be used
to switch between NICAM DUALⅠ/
NICAM DUALⅡ/ NICAM DUALⅠ+Ⅱ
/MONO and switch Audio language in
DTV mode.
MENU: Press to enter the menu screen
7.
for various optional adjustable settings.
8.
9.
10.
Exit OSD Menu.
EXIT
:
▲/▼/◄/►: To select the direction.
ENTER: Press to execute the selected
item in the menu screen or enter the
desired value in any input mode.
11.
INDEX: Press to enter the Recorded list.
(In DTV mode)
12.
LIST: Press to call up the channel list.
26
25
27
Press again to exit it.
13.
CH+/CH-: Press to select channels in
ascending or descending order.
14.
VOL+/VOL-: Press to adjust the volume
level up or down.
SLEEP: Press to set the sleep timer.
15.
When the preset length of time has
passed, the TV set enters standby mode.
16.
: Switch on/off the favorite programs
17. EPG: Electronic Program Guide, use in
the DTV mode.
18.
: Return to last viewed program.
list.
Remote Control
_________
6
Remote Control
0
25
19. COLOR BUTTONS: Red/ green/ yellow/
blue key navigation link.
: Fast reverse (in USB mode).
: Fast forward (in USB mode).
: Previous (in USB mode).
: Next (in USB mode).
20. STILL: Press to hold the picture.
: Hold the teletext page on display,
press again to release.
: Stop (in USB/PVR mode).
: Enter the Teletext, press again for
21.
MIX mode, press this button again to
exit.
: Play / Pause (in USB/PVR mode).
RADIO: Press to interchange Radio and
22.
DTV programs when there is Radio
program (In DTV mode).
23.
24.
25.
26
27
26.
27.
: Press to select different images
: Change size of teletext screen in
display mode.
: Enter subtitle mode or subpage.
: Cancel the teletext but not to exit
teletext, press again to exit.
DMP: Press to switch to the USB source.
: Press button to start recording.
(In PVR mode).
sizes.
NOTE:
All pictures in this manual are examples, only for reference, actual product may di
from the pictures.
The buttons not mentioned here are not used.
ffer
Basic Operation
_________
7
QUICK START GUIDE
• Connection
1. Connecting the mains and antenna.
2. Press Power button on the remote to turn on the TV.
• First Time Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in
configuring basic settings.
OSD Language
Press the◄/►button to select the desired OSD (On Screen Display) language.
Mode Setting
Press the◄/►button to select Home Mode or Store Mode.
Country
Press the◄/►button to select the country you want to.
Auto Scan
Press the◄/►button to select mode: DTV+ATV, DTV, ATV.
Turning on and off the TV
• Turn on the TV
Connect the AC input cable.
button on remote control can turn on TV
• Turn off the TV
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug the
set from the mains and aerial.
• No signal
There is No Signal menu on screen when there is no input signal. In ATV/DTV mode,
if there is no signal in 15 minutes, the TV will turn off automatically. In PC mode, the TV
set will automatically turn off in 5 minutes if no input signal. When VGA cable is
connected, the TV turns on automatically.
Programme Selection
• Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
• Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
• Example
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
If TV has a power switch, turn it on firstly.
from standby mode.
Press the
Basic Operation
_________
8
Volume adjustment
• Press the VOL+/- button to adjust the volume.
• If you want to switch the sound OFF, press the .
• You can release mute by pressing the
Changing the Input Source
You can select the input source by pressing the SOURCE button on the remote control.
Press the▲/▼button to cycle through the input source, and press the ENTER button to
confirm your
How to Navigate Menus
Before using the TV follow the steps below to learn how to navigate the menu in order
to select and adjust different functions. The access step may differ depending on the
selected menu.
1. Press the MENU button to display the main menu.
2. Press the◄/►button to cycl
3. Press the▲/▼button to select the desired sub item.
4. Press the ENTER button to access the submenu.
5. Press the ▲/▼/◄/► button to select the desired value. T
OSD may diffe
6. Press the MENU button to return to the previous menu.
7. Press the EXIT button exit from the menu.
NOTE:
When an item in MENU is displayed gra
cannot be adjusted.
Buttons on the TV
control. If your remote control
TV to select menus. This manual focuses on operation of the remote control.
Some items in the menus may be hidden depending on modes or signal sources
used.
choice.
e through the main menu.
r depending on the selected menu.
have the same function as corresponding buttons on the remote
is lost or couldn’t work, you may use the buttons on the
or increase the volume.
he adjustment in the
y, it means that the item is not available or
OSD Menu
_________
9
Configuring the Picture Menu
• Picture Mode
You can select the type of picture which
best corresponds to your viewing
requirements.
• Brightness
Adjusts the base level of the signal in the
picture.
• Contrast
Adjusts the signal level between black
and white in the picture.
• Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the
picture.
• Saturation
Adjusts intensity of all colours.
• Hue (Only in the NTSC mode)
Adjusts the balance between red and green levels.
• Color Temp
Select the color temperature of the picture.
• Aspect Ratio
You can select the picture size which best corresponds to your viewing requirements.
• PC Setting (In PC mode)
Auto Adjust: Adjust the image automatically.
H Position: Centre the image by moving it left or right.
V Position: Centre the image by moving it up or down.
Phase: Minimize horizontal distortion.
Clock: Minimize vertical stripes in the screen image.
• Advanced Settings
NR: Set options to reduce video noise.
MPEG NR: Set options to reduce MPEG noise.
Dynamic Contrast: Automatically adjust picture detail and brightness.
OSD Menu
_________
10
Configuring the Sound Menu
• Sound Mode
You can select a sound mode to suit
your personal preferences.
• Treble
Adjust the treble effect. Increases or
devreases high-pitched sounds.
• Bass
Adjust the bass effect. Increases or
decre
ases lower-pitched sounds.
• Balance
You can adjust the so
speakers to preferred levels.
• Surround Sound
You can select a desired Surround Sound mode.
• EQ Setting
Adjust the curve of 7 bands equalizer.
EQ Mode: Only in User mode, the following can be manually adjusted.
120Hz/300Hz/500Hz/1.2KHz/3.0KHz/7.5KHz/10KHz: Adjusts the level of specific
bandwidth frequencies.
Based on
adjustment with certain frequency band at a
changes.
• AVL
AVL automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment
may be needed every time when the channel is changed. This feature allows users to
enjoy stable volume levels by making automatic adjustments for each program.
• SPDIF
You can select a desired SPDIF Output mode.
• Audio Description (In DTV mode)
Press the▲/▼button to sel
sub-menu.
Press the▲/▼button to sel
When the mode is On, Volume can be adjusted by users.
• Sound Type (In DTV mode)
Press the▲/▼button to select Sound Type, then press the◄/►button to select.
your favorites about which frequency band need to be adjusted, make small
und balance of the
time. We suggest NOT making too large
ect Audio Description, then press the►button to enter
ect Mode, then press the◄/►button to select On, Off.
OSD Menu
_________
11
Configuring the Channel Menu
• Auto Scan
Press the ENTER button to enter
sub-menu.
Country: Press the◄/►button to select
country.
Mode: Press the◄/►button to select Mode:
DTV+ATV, DTV, ATV.
Start: Press the ENTER button to start the
auto searching.
• Manual Scan
Press the ENTER button to enter sub-menu.
- Digital Manual Scan: Press the▲/▼button to select the Digital Manual Scan, then
press the ENTER button to enter sub-menu.
Digital Scan: Press the◄/►button to select the channel number.
Start: Press the ENTER button to start the channel searching.
Frequency: Display the frequency of current TV signal.
Strength: Display the quality of current TV signal.
- Analog Manual Scan: Press the▲/▼button to select the Analog Manual Scan, then
press the ENTER button to enter sub-menu.
Analog Scan: Press the◄/►button to select Analog Scan.
Channel to Save: Press the◄/►button to select channel.
Color System: Press the◄/►button to select Color System.
Sound System: Press the◄/►button to select Sound System.
AFC: Press the◄/►button to select On or Off.
Start: Press the ENTER button to start the channel searching.
• Channel Edit
First press the▲/▼button to highlight the channel you want to delete or skip or swap,
then:
Press the red button to delete the channel.
Press the green button to skip the select channel.
(Your TV set will skip the channel automatically when using CH+/- to view the
channels.)
Press the yellow button to rename the channel.
Press the blue button to set the channel to moving state, then press the▲/▼button to
move it to the positon you want to put.
• Signal Information (In DTV mode)
Display the current Signal Information.
(In ATV mode)
OSD Menu
_________
12
Configuring the Lock System Menu
• Enter Password
The following items are only available if
the password input is correct.
Default password is 0000. If you forget
what you set, please call the service c
Enable
•
Channel Locks
Keypad are available when Enable is On.
•
Channel Locks
Press▲/▼to sele
to lock, then press ENTER to set it to lock.
•
Parental Rating
Press the▲/▼but
•
Lock Keypad
Set to prevent i
•
New Password
Press the▲/▼bu
to set twice.
•
Clear Lock
Restore the L
, Parental Rating and Lock
ct the channel you want
ton to select Parental Rating, then press◄/►button to select.
t from being used by young children, or other unexpected usage.
tton to select New Password, then enter a 4-digital number you want
ock System settings to the factory default.
enter.
OSD Menu
_________
13
C
onfiguring the Setup Menu
• OSD Language
Select your prefer
Display language.
Audio Languages (In DTV mode)
•
Select your pr
(Available for digital channels if multiple
audio languages are broadcas
Press the▲/▼button to select Audio
Languages, then press ENTE
to enter sub-menu.
Press the arrow button to select the
Audio Primary Language and Audio
Secondary Language.
•
Subtitle (In DTV mode)
Press the
Press the▲/▼button to select Mode, then press◄/►button to select On or Off.
Press the arrow button to select the Subtitle Primary Language and Subtitle
Secondary Language.
Press the▲/▼button to select Hearing Impaired, then press◄/►button to select On
or Off.
Teletex
• t
Adjust Te
Press the▲/▼button to select Teletext, then press ENTER button to e
Under DTV source, press◄/►button to se
Under ATV source, press◄/►button to select Decoding Page Lan
•
Mode Setting
Press◄/►butto
•
Time Settings
Press the▲/▼b
sub-menu.
OSD Time: Select On-Screen Menu displaying time.
Sleep Timer: Select the time to turn the TV to standby mo
Auto Sleep: Select the Auto Sleep time you want.
Time Zone: Select your time zone.
sub-menu. Set Auto Sync to Off, then
Note: In the case of loss of power, the clock setting w
▲/▼button to select Subtitle, then press ENTER button to enter sub-menu.
letext settings. Only available under DTV and ATV source.
red On Screen
eferred
audio language.
ted.)
R button
nter sub-menu.
lect Digital Teletext Language.
guage.
n to select Store mode or Home Mode.
utton to select Time Settings, then press ENTER button to enter
de automatically.
t Time, then press Time: Press the▲/▼button to selec
you can set the time manually.
ENTER button to enter
ill be lost.
OSD Menu
_________
14
• PVR Settings (In DTV mode)
Press the▲/▼button to sel
sub-menu.
It will check the USB.
File Manager: To disp
Replay: Press the red button to replay video.
Delete One: Press the green button to delete a vide
Delete All: Press the yellow button to delete all video.
Zoom In:
Device List: When multiple recording devieds are conne
are listed. Select one recording device in the Device List.
Format: Press the red button to format USB disk.
Scheduled Record:
Press the ENTER button to set the parameters for recording.
Delete One: Press the green button to delete a vide
Delete All: Press the yellow button to delete all video.
D
1. Insert an USB disk, Press
recording, press button to zoom in/out the record menu.
2. Press button to stop recording, it will return to normal b
NOTE:
USB d
During the Device formatting, do not disco
If PVR recording system is used all the time, it will exit PVR system automatically.
USB memory must support USB2.0 high-speed specification.
Some of nonstandard USB device may not be supported.
•
First Time Setup
This is a guide to h
•
Reset
Restore
Press the blue button to zoom in the video.
igital program recording
isk at least the capacity with 512MB.
Please format the inserted USB disk when it
progress. If y
device to the TV, please ba
data. If USB disk in some virus meeting formats turn failure.
When an USB device has several partitions,the PVR system can help to choose
anyone
ou format the device, all files will be deleted. Before formatting your
of that to perform recording.
elp you to setup the TV.
the system settings to the factory default.
ect PVR Settings, then press ENTER button to enter
lay the Recorded list.
o.
cted, th
e recording devices
To set the parameters for sch
button to record the current program. During the
ck up your files to prevent them from damage or loss o
eduled recording.
o.
roadcast television.
could not be recorded to.
nnect the device while formatti
ng is in
f
Multimedia Operation
_________
15
Me
sing USB mode U
• To Access/Quit USB mode
1. Connect an USB device.
2. Press SOURCE button to
display the main menu. Use the ▲/▼ to highlight USB,
and the ENTER button to access the USB mode.
3. u
You may also use the signal source selection men
NOTE:
Special USB
device may be not or well supported.
USB max. Load: DC5V 500mA
T
• he formats supported
Multimedia
Categories
Movie
File Extensi
MPEG(*.mpeg,
*.mpg, *.dat, *vob)
MPEG-4(*.mp4)
TS(*.ts, *.trp, *tp)
MKV(*.mkv)
*.avi
*.flv
on
Video Decod io Decode
MPEG-1
MPEG-4 SP
MPEG-4 ASP
MPEG-4 XVID
DivX
MP@Level 4
H.264(AVC)
MPEG-1 MP
MPEG-2 MP
MPEG-4 SP
MPEG-4 ASP
MPEG.-4 XVID
H.264(AVC)
MP@Level 4
H.264(AVC)
HP@Level 4
MPEG-1
H.264(AVC)
H.264(AVC)
HP@Level 4
MPEG-1
MPEG-4 SP
MPEG-4 ASP
MPEG-4 XVID
H.264(AVC) MP
@ Level 4
H.264(AVC) HP
@ Level 4
H.264(AVC) MP
@ Level 4
H.264(AVC) HP
@ Level 4
Decoder
e Aud
MP MPEG-2
(AVC) H.264
el 4 HP@Lev
MP MPEG-2
MP@Level 4
MP MPEG-2
to exit from the USB mode.
Notes
MPGE1/MPEG2/M
PEG4:
MPEG-1 Layer 2
MPEG-1 Layer 3
MPEG-2 Layer 3
AC3
LC AACHE-AAC V
HE-AAC V2
1
Up to 1080p @ 30F
H.264: Up to 1080p
@ 25F
AAC: AAC-LC(type
2),
HE-AAC v1(type
5,SBR),
HE-AAC v2(type
29,SBR+PS)
_________
16
Multimedia Operation
Me
Bit Rate: up to
320Kbps
Sample Rate:
32KHz, 44
48KHz
72x72 < B seline
resolution <
7680x4320
Photo
Progressive Mod
ze <=1280x1024
Si
File Size <=10MB
File Size <=1MB
*.mp3
Music
AAC(*.aac,*m4a)
*.wav
*.jpg
*.jpeg
Text *.txt
No x 500 files su d each folder. te: Ma pporte
N
OTE:
l algorithm documents may n Specia
MPEG-2 Layer 3
Baseline Mode
Progressive
Mode
ot be or well be supported by the USB.
MPEG-1 Layer 3
AAC
HE-AAC V1
C V2
HE-AA
LPCM
ADPCM
TF-8
U
UNICODE
ASCII
The USB supports the format mentioned above, if the file format is not supp
change it to the given format.
•
ain
Operating Interface
M
.1KHz,
a
e
orted,
Use the ◄/► button to select Photo, Music, Movie or Text. Press ENTER button enter
into sub-menu.
_________
17
Multimedia Operation
Me
hoto
P
Press th
enter.
Press t
enter.
Press t
Press the INDEX button to access to the
Use the arrow buttons to highlight the folder, and then press
Use the arro
Press the
Press the EXIT button to back to the previous menu.
M
Press th
enter.
Press t
enter.
Press t
Press the INDEX button to a
Use the ▲/▼ button to highlight the folder, and then pr
Use the ▲/▼ b
Press the
Press the EXIT button to back to the previous menu.
M
Press th
enter.
Press t
enter.
Press t
Press the INDEX button to a
Use the ▲/▼ button to highlight the folder, and then pr
Use the ▲/▼ b
Press the
Press the EXIT button to back to the previous menu.
T
Press
enter.
Press t
enter.
Press t
Press the INDEX button to access to the
Use the ▲/▼ button to highlight the folder, and then pr
Use the ▲/▼ b
Press the EXIT button to back to the previous menu.
e ◄/► button to select Photo in the main menu, then press ENTER button to
he ◄/► button to select disk you want to watch, then press ENTER button to
he CH+/- button to change page.
quick menu.
w buttons to highlight a file, and then pr
to stop the playing files.
usic
e ◄/► button to select Music in the main menu, then press ENTER button to
he ▲/▼ button to select disk you want to watch, then press ENTER button to
he ◄/► button to change page.
ccess to the
utton to highlight a file, and then press the
to stop the playing files.
ovie
e ◄/► button to select Movie in the main menu, then press ENTER button to
he ▲/▼ button to select disk you want to watch, then press ENTER button to
he ◄/► button to change page.
ccess to the
utton to highlight a file, and then press the
to stop the playing files.
ext
the ◄/► button to select Text in the main menu, then press ENTER button to
he ▲/▼ button to select disk you want to watch, then press ENTER button to
he ◄/► button to change page.
utton to highlight a file, and then press the button to play.
quick menu.
quick menu.
quick menu.
ess the button to play.
the ENTER button.
ess the ENTER button.
button to play.
ess the ENTER button.
button to play.
ess the ENTER button.
Important Unique Buttons
_________
18
PROGRAM GUIDE (In DTV mode)
Press the EPG button to enter PROGRAM GUIDE menu.
ttons
Press the
program you want to record. The unit is only able to do schedule recording when TV is
turned on or in standby mode. When recording starts in standby mode, there will be no
picture or sound from the unit.
Press the red button to view the previous date’s guide.
Press the green button to view the next date’s guide.
Press the yellow button to display the EPG Schedule List.
Press the blue button to book program.
Press the EXIT button to exit.
Channel Li
Press LIST button to display the Channel List.
Press ▲/▼ to select the items. Press ENTER button to enter the channel.
Press ◄ / ► button to page up or down th
Press EXIT button to exit.
Favorite List
Press button to display the favorite list.
Press the red button to delete the selected favorite program.
Press the green button to add the current program to the favorite list.
Press ▲/▼ to select the items.
Press ◄ / ► button to page up or down the Favorite list.
Press ENTER button to enter the channel.
Press EXIT button to exit.
button to set the parameters for recording. You can choose the time of the
st
e Channel list.
Teletext
_________
19
Using the teletext feature
• Display teletext
1. Select a TV station with a teletext signal.
2. Press the
3. Press the
superimpose the teletext page over the TV program.
4. Press the
• Page selection
1. Enter the page number (three digits) using the number buttons. If you press a
wrong number during input, you must compl
reenter the correct page number.
2. The CH-/CH+ button can be used to select the preceding or followi
• Hold
You can press the
• Index
Press the
• Enlarging Text
When a page is displayed, you can double the size of the text to make it easier to
read.
1. Press the
2. Press the
3. Press the
• Reveal mode
You can display concealed teletext information (e.g. Answer to puzzles or riddles etc.)
by pressing
display.
• Subpage
Some teletext may contain several sub-pages which are automatically paged in a
certain cycle by the TV station.
1. Yon can enter into a certain sub page by pressing the button directly and
select the page number with number buttons. Enter the sub page number (e.g. 0003)
for the third sub page.
2. Press the button again to exit the sub page mode.
• Color buttons (Red, Green, Yellow and Blue)
Press these buttons to access directly to the corresp
er part of the teletext screen.
the low
button to enter teletext mode.
button 2nd to enter Mix mode, this function enables you to
button 3rd return or exit to the normal ATV/DTV mode.
ete the three digit number and then
ng page.
button to hold a page, and press it again to release the page.
i
button to enter the main index page directly.
button to enlarge the top half of the page.
button again to enlarge the bottom half of the page.
button once more to return to the normal display.
?
button. Press ? button again to remove the information from the
onding color pages displayed at
Trouble shooting
_________
20
Troubleshooting
Before contacting a service technician, perform the following simple checks. If any
problem still persists, unplug the TV and call Kogan customer support for advice.
PROBLEM POSSIBLE SOLUTION
- Check whether the main plug has been connected to
a wall outlet.
No sound and picture
Normal picture but no
sound
The remote control does
not work
Power is suddenly turned
off
Picture appears slowly
after switching on
No color, poor color or
poor picture
Horizontal/vertical bars or
picture shaking
Poor reception on some
channels
Lines or streaks in
pictures
No output from one of the
speakers
- Check whether you have pressed the POWER
button on the front of TV set.
- Check the picture contrast and brightness settings.
- Check the volume.
- Sound muted? Press the MUTE button.
- Try another channel, the problem may be with the
broadcast.
- Are the audio cables installed properly?
- Check to see if there any object between the product
and remote control causing obstruction.
- Are batteries installed with correct polarity (+ to +,
- to -)?
- Correct remote operating mode set: TV, VCR etc.?
- Install new batteries
- Is the sleep timer set?
- Check the power control settings. Power interrupted.
- No broadcast on station tuned with auto activated.
- This is normal, the image is muted during the
product startup process. Please contact your service
center if the picture has not appeared after five
minutes.
- Adjust the color in menu option.
- Keep a sufficient distance between the product and
the VCR.
- Try another channel, the problem may be with the
broa
dcast.
- Are the VIDEO cables installed properly?
- Activate the any function to re
the picture.
- Check for local interference such as an electrical
appliance or power tool.
- Station or cable product experiencing problems.
Tune to another station.
- Station signal is weak, reorient antenna to receive
we
aker station.
- Check for sources of possible interference.
- Check the antenna (Change the direction of the
antenna).
- Adjust balance in menu option.
store the brightness of
Trouble shooting
_________
21
NOTE:
Maintenance
Early malfunctions can be prevented. Careful and regular cleaning can e
amount of time you will have your new TV. Be sure to turn the power off and unplug the
power cord before you begin any cleaning.
Cleaning the screen
1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a
mixture of lukewarm water and a little fabric softener or dis
the cloth until it’s almost dry, and then used it to wipe the screen.
2. Make sure the excess water is off the screen, and then let it air-dry before you turn
on your TV.
Cleaning the cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth. Please be sure
not to use a wet cloth.
Extended Absence
There is a problem in VGA mode (Only VGA mode applied).
PROBLEM POSSIBLE SOLUTION
- Adjust resolution, horizontal frequency, or vertical
frequency.
The signal is out of range.
Vertical bar or stripe on
back ground & Horizontal
Noise & Incorrect position.
Screen color is unstable or
single color.
If you expect to leave your TV dormant for a long time (such as a vacation), it’s a
good idea to unplug the po
lightning or power surges.
- Check it whether the signal cable is connected or
loose.
- Check the input source.
- Work the auto configure or adjust clock, phase, or
H/V position.
- Check the signal cable.
- Reinstall the PC video card.
h washing detergent. Wring
wer cord to protect against possible damage from
xtend the
Disposal of old electrical appliances
The European directive 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances must
not be disposed of in the normal unsorted municipal waste stream. Old
appliances must be collected separately in order to optimize the recovery
and recycling of the materials they contain, and reduce the impact on human
health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of your
obligation, that when you dispose of the appliance, it must be separately
collected.
Consumers should contact their local authority or retailer for information
concerning the correct disposal of their old appliance.
Specifications
_________
22
Techincal Specifications
TV
TV System
Screen
Resolution 1920 x1080 pixels (RGB)
Aerial input 75
Max Power Consumption
size 40" (diagonal)
PAL/SECAM B G/DK
60W
Loading...