Kogan KALCD46FHDXA User Manual

<>ϰϲ&,y

USER MANUAL

USB........................... ..........................................

Remote control/batteries

P.MODE:
S.MODE:
I/II:

SLEEP:
0,1-9:

SOURCE:

OK:
INFO:

MUTE
ASPECT:

l

n: USB stop button / Teletext cancel button

Picture mode button, setting the picture mode.

Sound mode button, setting the sound mode.

Press the I/II button to choose a different audio channel.

Sleep button, setting TV power off time.

TV channel selection button.

Press the FAV button to start the “Favorite List” for selecting your favorite program.

Signal source selection button (ATV/DTV/Media/AV/PC/Component/DVD/HDMI).

Confirm button, confirm all the changes and settings.

Press the INFO button for information.

Press the ASPECT button to select the picture display ratio: Auto / 4:3 / 16:9 / Zoom 1 / Zoom 2 / Just Scan.

Press the EPG button for detailed information about the channel.
DTV recording

: USB play/pause button / Teletext index

ZOOM: TV display mode select /USB zoom in/out
f: USB previous button / Teletext hold button

: USB next button / Teletext size button

e

d: USB fast-backward button / Teletext reveal

/ TXT/MIX: USB fast-forward button / Teletext

c

GOTO: USB goto button
REPEAT: USB repeat playback button

A-B: USB A-B repeat button

SUBTITLE: Subtitle button

display button

button

button

on/off / mix button

3

4

5

6

7

1

2

Remote sensor

Power indicator

.

.

Power on/off button.

6

1 2 3 4 5

1. USB input socket (USB)

2.

3. VGA interface input socket (VGA)

4. PC audio input socket (PC AUDIO)

5. Composite video & audio input sockets (AV IN-VIDEO R L)

6. Component video input sockets (Y Pb/Cb Pr/Cr)

7. Coaxial Input socket (COAXIAL)

8. Antenna/Cable TV input socket (RF 75

9. Audio ouput socket (

)

))

7 8 9

YPbPr

AV

Assembly

A ssembling the stand

Con t en ts of car t on:

1 x LCD TV

Step 1:

Place a soft cushioned
material on top of a flat
surface to prevent damaging
the LCD screen.Then place
the TV monitor flat on top,
with the screen side facing
down.

Step 2:

1 x Stand base

7 x PB4*14 Screws (for stand)

T e a r o u t t h e t ap e, u s e t h e
seve n s u p p l i e d PB 4X 14 s c r e w s
t o f a s t e n t h e st an d t o t h e
s u p p o r t c o l u mm , a s i l l u s t r a t e d
on t h e r i g h t .

Step 3:

Th e s t a n d i s no w fu l l y
as s e m b l e d . a s il lu st r a t e d
on t h e r i g h t .

8

Channel Tuning

TV :

DTV :

Radio :

0 Programme

0 Programme

0 Programme

If this is the first time switch on, the First time installation
menu will appear on the display.

Language

Press o/p/b/a button to select the desired language,
then press OK button to enter the “Channel Tuning”
screen. The original language of this TV is English.

Channel Tuning

The TV will start searching channels automatically from
the lowest frequency. When it finds a station, it will store
this in the first location and move to the next. When auto
tuning is completed, the TV will display the first station
found.

0 %

Please press MENU key to exit

(TV)

Press MENU or EXIT button to skip or cancel the tuning
process.

9

CHANNEL

Move

1 CHANNEL MENU

The image on the left depicts the channel menu.
The definition of each option:

Auto Tuning

ATV Manual Tuning

DTV Manual Tuning

Programme Edit

Signal Information

MENU

Return

OK

Select

EXIT

Exit

Auto Tuning: Press button to this position, then
press or OK button to enter auto tuning of both ATV
and DTV channels.
DTV Manual Tuning: Press button to this position,

OK

then press or

button to enter DTV Manual Tuning.
It will scan current DTV (Digital TV) program within a
f

requency range accurately and store the result manually.

ATV Manual Tuning: Press button to this position,

OK

then press or

Programme Edit:

button to enter ATV Manual Tuning.

Press button to this position, then
press or OK button to enter Programme Edit screen.
You can do such editing operations as delete, rename,
move, skip (sign/cancel the skip mark) and fav (add/
delete to the favorite program list) for the selected
channel in the available channel list when the “Programme
Edit” is selected.
Signal Information (For DTV only): Press button
to this position, then press or OK button to enter Signal
Information screen.

Channel Tuning

TV :

DTV :

Radio :

0 %

Please press MENU key to exit

DTV Manual Tuning

VHF CH 9A

Press OK to search

Bad Freq: 205.50 Mhz Good

0 Programme

0 Programme

0 Programme

(TV)

Auto Tuning:

It will auto scan the channels automatically,
and stop at the end of the channel search. The auto
scan result stores in the internal memory automatically.

DTV Manual Tuning:

Press b/a button to select channel,

then press OK button to search programs.

10

ATV Manual Tuning

Current CH

Color System

Sound System

Fine-Tune

AFC

Search

Menu

1

PAL

BG

44.00 MHz

Off

ATV Manual Tuning:

Current CH: Press b/a button to select the channel
number you want to store.
Color System: Press b/a button to change the color
system as Auto, SECAM, PAL.
Sound System: Press b/a button to change the sound
system as DK, I, BG.
Fine-Tune: Press b/a button to scan current program
within a frequency range accurately and store the result
manually.
AFC: Press b/a button to set the Automatic Frequency
Control to On or Off.
Search: Press b/a button to start search.

1 S-43

2 S-09

3 S-11

4 S-14

Delete

OK

Programme Edit

Rename Move Skip

FAV

MenuFav

ATV

ATV

ATV

ATV

Programme Edit: Press o/p button to move the high-
lighted bar. Press the colored short-cut keys to do the
editing operations, and press MENU button to stop the
editing work.

Note:
Before doing editing operations, make sure the channel
list is not an empty one.

This option has five functions:

1. Press Red button to delete the current channel.

2. Press Green button to rename the current channel
(For ATV only).

3. Press Yellow button and o/p button to move the
current channel.

4. Press Blue button to skip the current channel.

5. Press FAV button to set the current channel to your
favorite channel, there will be a red heart at the behind
of the channel selected. If the current channel is already
be one of your favorite channel, press it again will set it
to a normal one.
You can call out the channels from the “Favorite List”
by pressing FAV button while enjoying TV program.

Signal Information

Channel 154

Frequency 205.50 Mhz

Quality 99

Strength 22

Signal Information (For DTV only): This menu displays
signal details, including Channel, Frequency, Quality
and Strength.

11

PICTURE

Move

2 PICTURE MENU

The image on the left depicts the picture menu.
The definition of each option:

Picture Mode

Contrast

Brightness

Colour

Tint

Sharpness

Colour Temp

Noise Reduction

MENU

Return

OK

Select

Personal

50

50

50

50

30

Normal

Middle

Picture Mode: Changes the picture mode in sequence:
Dynamic Standard Mild Personal. You may select
the picture mode by pressing P.MODE button repeatedly.
Contrast: Changes the value of contrast with the key
in the range of 0 to 100.

EXIT

Exit

Brightness: Changes the value of brightness with the
key in the range of 0 to 100.
Colour: Changes the value of colour with the key
in the range of 0 to 100.
Tint: Changes the value of tint with the key in the
range of 0 to 100 (For NTSC signal only).
Sharpness: Changes the value of sharpness with the
key in the range of 0 to 100.
Colour Temp: Changes the colour temperature
in sequence: Cold Normal Warm.
Noise Reduction: Changes the picture noise reduction
in sequence: Off Low Middle Default.

SOUND

Move

AD Switch

MENU

Return

AD Volume 30

Sound Mode

Treble

Bass

Balance

Auto Volume

SPDIF Mode

AD Switch

Menu

3 SOUND MENU

The image on the left depicts the sound menu.
The definition of each option:

Standard

50

50

0

Off

Auto

Off

OK

Select

EXIT

Exit

On

Sound Mode: Changes the sound mode in sequence:
Standard Music Movie Sports Personal. You may
select the sound mode by pressing S.MODE button repeatedly.
Treble: Changes the value of treble with the key
in the range of 0 to 100.
Bass: Changes the value of bass with the key in
the range of 0 to 100.
Balance: Changes the value of balance with the key
in the range of -50 to +50.
Auto Volume: Changes the auto volume mode to “On”
or “Off”.
SPDIF Mode: Changes the SPDIF mode

in sequence:

Auto Off PCM.

AD Switch (For DTV only):

Press button to this

position, then press or OK button to enter. Press b/a
button to select the audio descriptor to On or Off as well
as adjust the volume of the AD.

12

TIME

4 TIME MENU

The image on the left depicts the time menu.
The definition of each option:

Clock

Time Zone

Sleep Timer

Auto Standby

OSD Timer

Move

MENU

Return

OK

Select

01/Jan 11:11

NSW/ACT

EXIT

Off

Off

15 S

Exit

Clock (For DTV only): Display the current system time.
It’s not available.

Time Zone (For DTV only): Press p/o/b/a button to

set the proper time zone according to your region.

Sleep Timer: Set the sleep timer to put automatically

the TV in standby mode. Timer can be selected as 10,
20, 30, 60, 90, 120, 180, 240 and 0 Min(Off). You may
select the sleep timer by pressing SLEEP button
repeatedly.

Auto Standby:

The options are Off, 3 H, 4 H, 5 H. You
can set the main unit to turn off automatically when there
is no signal in a preset time (1 minute while the input
source is "PC").

OSD Timer: Changes the OSD timer as 5 S, 10 S,

15 S, 20 S, 25 S, 30 S.

LOCK

Move

5 LOCK MENU

The image on the left depicts the lock menu.
The definition of each option:

EXIT

Off

NO BLOCK

Off

Exit

Lock System: Press o/p button to select Lock System,
then press a or OK button to select On or Off which
enables or disables below lock functions.
Password: Enter the default password “0000” to go to
the LOCK function menu if you have set Lock System
to On.

Set Password: Set a new password.
Block Program: Add or release a lock to some special

program. When watch a locked program, a dialogue box
appears. You should

enter the correct password. The

initial password is “0000”.

Parental Guidance (For DTV program only):

Set the parental guidance level.
Key Lock: Set to On, the keypads on the main unit
cannot work.
Hotel Mode: Set the hotel mode function.

Lock System

Set Password

Block Program

Parental Guidance

Key Lock
Hotel Mode

MENU

Return

OK

Select

13

Please enter old password

Please enter new password

Confirm new password

Set Password:

the old and a new password and then re-entering

You can change the password by entering

it to

confirm the new one.

lecnaCraelC

Block Program

350 DVB-4-1

351 DVB-4-1

352 DVB-4-1

353 DVB-4-1

OK

Parental Guidance

BLOCK ALL

OK

Lock

PG

Block Program:

Press Green button to lock the desired

channel, press it again to unlock it.

DTV

DTV

DTV

DTV

Menu

Parental Guidance (For DTV program only):

Press

o/p button to set the parental guidance level.

P

C

G

M

Menu

14

Hotel Mode

Source Lock

Default Source

Return

Return

Default Prog

Max Volume

Clear Lock

OK

Select

OSD Language

TT Language

Hearing Impaired

PVR File System

Aspect Ratio

Blue Screen

First Time Installation

Reset

Software Update (USB)

OK

Select

HOTEL

Move

SETUP

Move

MENU

MENU

Select Disk

Check PVR File System Start

USB Disk

Format

Time Shift Size

Speed

Free Record Limit 6 Hr.

OK

Menu

Hotel Mode: Have the priority than other options below.
To set below options, this item must be set to “On” firstly.

Off

Off

1

100

Source Lock: To set the input source item which you
want to be locked.
Default Source: To set the default input source when
you open the TV main unit.
Default Prog: To set the default ATV channel program

EXIT

Exit

when you power on the TV.

Max Volume: To set the maximum volume value.
Clear Lock: To clear all the locks.

6 SETUP MENU

The image on the left depicts the setup menu.
The definition of each option:

English

West

Off

16:9

On

EXIT

Exit

C:

OSD Language: Changes the OSD language as
English Spanish French Italian German.

TT Language: Set the teletext language.
Hearing Impaired (For DTV only): Changes the

hearing impaired mode to “On” or “Off”.
PVR File System (For DTV only): To check the USB
connected and provide with the recording function.
Aspect Ratio: Changes the aspect ratio in sequence:
Auto 4:3 16:9 Zoom 1 Zoom 2 Just Scan.
(“Just Scan” is panoramic display, so black edging
may appear according to the data rate. “Auto” and
“Just Scan” may be not available in some sources.)

Blue Screen:

Set to “On”, blue screen displays; set

to “Off”, blue screen disappears.
First Time Installation: Set

relevant options including
OSD Language and Channel Tuning. Please refer to P8
for concrete operations.
Reset: To set all the options to factory

setting

(Set this option only when it is necessary).
Software Update (USB): To

update software by using

USB.

PVR File System (For DTV only): Firstly insert USB
device to the USB1 port, and press o/p button to choose
“Check PVR File System”, then press OK button to start
checking. This process needs some seconds. If it finishes,
the word “SUCCESS” will be shown after “Check PVR
File System”, and the speed will be shown on the menu
as well. Now you can record and save the DTV programme.

Note: An externally powered hard disk is suggested to
be used.

15

Play FB FF Prev. Next Pause Stop

9 Nine Digital 15:51

Recorded List

HI-1

HI-2

HI-3

HI-4

HI-5

Programme

[00:00:59]

(0000:23:40)

Press button on the remote control to start recording
the programme. “ ” mark appears at the top left corner
of the TV screen, and the title bar appears at the bottom
which includes the recording information. You can press
b/a button to select one function you want to run, then
press OK button to operate.
Press EXIT button to hide the title bar.
You can press relevant buttons on the remote control
to perform such functions directly.

Press REC.LIST button to display the recorded list.
Press o/p button to select the desired one, then press
OK button to play the recorded programme.

Press Red button to delete the current list.
Press Green button to show the list’s information.
Press INDEX button to sort all the programs according
to Programme, Channel or Time.

Delete

OK Index

Input Source

ATV

DTV

Media

AV

PC

Component

DVD

HDMI

OK

INFO

1.

Press SOURCE button to change from ATV to other

available inputs.

2. Press button to select signal source.

3. Press OK or button to confirm.

4. Press EXIT button to exit signal souce menu.

16

Basic operation

Before operating Media menu, plug in USB device in USB1 port, then press SOURCE button
to set the input source to Media.
Press o/p button to select Media in the source menu. then press OK or a button to enter.
Press b/a button to select the submenu: PHOTO, MUSIC, MOVIE or TEXT, and press OK
button to confirm.

Supported USB format

This product can play the following formats of USB.

Mode Type Supported Format

USB menu

PHOTO

PHOTO

MUSIC

MOVIE

TEXT

PNG / JPEG / BMP

WMA / MP3

AVI / DAT / MP4 / MPG

TXT

Press b/a button to select “PHOTO”, then
press OK button to enter.

Press b/a button to select “Return” option to
back to the previous menu. Select “C” option
to enter.

18

EXIT

Exit

Exit

EXIT

Press b/a button to select the file you want
to watch in the file selecting menu.
When highlighting the option you select, the
file information will appear on the right and
picture will be previewed in the center.

MUSIC

Press OK button to start a slideshow.
Press Red button then select “Yes” or press
OK button to delete the file selected.
Press INFO button to show the menu in the
bottom, and you can press b/a button to
select one function you want to run, then press
OK button to operate.
Press EXIT button to return to the main menu.
You can press relevant buttons on the remote
control to perform such functions directly.

l button: Pause or resume playing.
f/e button: Skip to previous or next picture.
n button: Stop playing and return to the main

menu.

Press b/a button to select “MUSIC”, then
press OK button to enter.

Exit

EXIT

Press b/a button to select the file you want
to listen in the file selecting menu.
When highlighting the option you select, the
file information will appear on the right and
song will be played automatically.

19

Press b/a button to select one function in the bottom you want to run, then press OK button
to operate. Press EXIT button to return to the main menu.
You can press relevant buttons on the remote control to perform such functions directly.

l button: Pause or resume playing.
f/e button: Skip to previous or next music.
d/c button: Fast backward or forward.
n button: Stop playing and return to the main menu.

MOVIE

Exit

EXIT

Press b/a button to select “MOVIE”, then press OK button to enter.

Press INFO button to show the menu in the bottom, and you can press b/a button to select
one function you want to run, then press OK button to operate. Press EXIT button once to
exit the menu in the bottom, press it again to return to the main menu.
You can press relevant buttons on the remote control to perform such functions directly.

The basic operations are the same as “MUSIC”.

20

TEXT

EXIT

Exit

Press b/a button to select “TEXT”, then
press OK button to enter.

Press b/a button to select the file you want
to watch in the file selecting menu.
When highlighting the option you select, the
file information will appear on the right and
text will be previewed in the center.
Press OK button to start to view the text in
full screen.
Press INFO button to show the menu in the
bottom, and you can press b/a button to
select one function you want to run, then
press OK button to operate.
Press EXIT button to return to the main menu.
You can press relevant buttons on the remote
control to perform such functions directly.

21

22

23

46 inch

1018.08mm (H) X 572.67mm (V)

16:9

1920 X 1080

400 cd/m

4000:1

178

0.53025mm (H) X 0.53025mm (V)

16.7M

6.5ms

178

YPbPr Input

USB Input

(For YPBPR, AV)

1920x1080

2 (10W, 8 Ohm)

1

1

1

3

1

160W

pin

24