Kogan Kaktlsssmta User Manual

Product Features

• 220-240V/50Hz/1850-2200W

• Boil-dry protection

• Rapid boil system

• Automatically Turn off Safety System

• Heating element with hidden spiral

• Compartment for the cord

• 360°rotational connection

• Safety lock lid

• Handle with digital display to adjust temperature and keep warm.

HOW TO USE YOUR KETTLE

It is recommended that you operate the kettle several times following the below
instructions and then discard the water before first proper use. This will remove
the materials or dust remaining in the appliance, which is caused by the
manufacturing process.

1. Open the lid automatically by press down the Lid Knob and fill the kettle
with water. Then replace the lid, otherwise the kettle can not cut off power
automatically after water has been boiled.
Caution: The filled water level must be between the “Max” and “Min” level
as indicated on the housing. Too little water will do damage to the heat
element and if the water is overfilled, boiling water may be ejected.

2. Replace the kettle on the Power Base and connect to power supply.
Position the kettle so that the spout of kettle is facing away from you.

3. The kettle will emit a sound and the display screen will display the current
temperature. DO NOT open the lid while the water is boiling. At that time,
the “+” “-“ is active. Press the “+” ‘-“ switch to choose the desired
temperature you wish your water to be heated to. (The choice of
temperature range is between 20°C and 100°C). It will default to 100°C if
you don't make a selection. Press the “ ” switch and the water will begin
to heat up. The kettle will automatically turn off when the water is heated
up to the selected temperature.
Caution: Ensure that switch is clear of obstructions and the lid is firmly
closed. The kettle will not turn off if the switch is blocked or if the lid is left
open.