Kogan KAHTP1KXXXA Quick Start Guide

1000W Portable Electric Panel Heater

KAHTP1KXXXA

Quick Start Guide

Please read this manual fully before using your product.
This convection heater features a heating element with an aluminium heat sink, reliable multi­temperature control settings, universal casters, and mounts for wall or ceiling hanging.

Product Features

• High quality heating element with aluminium heat-sink, designed for rapid temperature
increase with no oxygen consumption required.

• Silent operations.

• Multiple safety devices ~ auto power-off during overheating/power surge/tip-over.

• Thermal sensor design ~ set to a room temperature you are comfortable with.

Safety Instructions

• Open the packaging, then remove the heater and check that the body and supplied
accessories are all complete and intact.

• Power on once the heater has been installed into the location you wish to use it.
Requirements for the power outlet is: AC 220~240V, 50/60Hz with a current 10A.≥

• Read the manual completely before using the heater. Keep a copy of the manual handy
for future reference, and make sure to supply a copy of the manual if you pass the heater
on to a new owner.

• This heater is only suitable for indoor use. Do not use it outdoors!

• Do not use the heater near a bathtub, shower or swimming pool.

• Do not leave the heater unattended during use. Keep the heater out of reach of children.

Do not use automatic switch devices on the heater (such as a timer switch), as automatic
operation of an unattended heater may be triggered.

• Do not cover the heater with anything during use. Maintain a safe distance between the
heater and flammable or explosive items to avoid the risk of fire or explosions.

• Do not insert any objects into the shell or protective grid of the electric heater. Electrical
leakage, shock or fire may be caused.

• Do not touch the metal housing of the heater during use, as it will get hot during the
running of the heater. Keep the heater out of the reach of small children to avoid the risk
of burns. Allow ample time for the heater to cool down after use before you put it into
storage.

• If the heater will be sitting unused for an extended period of time, please unplug it from
the power supply.

• Prior to using the heater, make sure it is in good condition and intact. If you find any
faults or damage to the heater body, power cord or plug, do NOT plug the unit into the
power supply. Contact the Kogan.com customer support team for advice.

• The heating unit of the heater itself (the heating film at the back of the protection grid)
can be easily damaged in a fall.

• Disconnect the power when moving or cleaning the heater. When disconnecting the
power, first turn off the switch, then unplug the power plug. Do not pull on the power
cord when unplugging the unit. Grasp the plug itself.

• Do not share the power socket with another electrical appliance to avoid current
overload. Excessive current through a single power outlet can increase the risk of fire.

1

Attention

Please handle this product with care and inspect it regularly to
ensure it is in good working order.

If the product, power supply cord or plug shows any signs of
damage: stop use, unplug and contact Kogan.com support.