Page 1
Page 2
Please read all instructions before operating this machine and keep a copy handy for
future reference.
Voltage: DC 24V
Power: 60W
Rated Working Time: 15 Minutes
A/C Adaptor
Input: AC100-240V 50/60Hz 1.6A
Output: DC24V 2.5A
FEATURES
Specifically designed to massage your feet, ankles and calves all at the same time.
Strong kneading action from the flexible kneading discs create a professional massage
experience, penetrating deeply into the muscles of your ankles and calves.
Pressure nodes located under your feet stimulate the reflex points on the soles of your
feet.
Personal preference choice of 3 massage programs.
Synergetic combination of kneading and heating actions give you a most relaxing and
revitalizing massage, while achieving a beneficial reflexology effect.
Auto shut-off feature activates after the massager has been in use for 15 minutes.
Detachable fabric covers (with zips) allow for cleaning to maintain good hygiene.
EFFECTIVENESS
The kneading and heating actions go deep into the different layers of muscles in your feet,
ankles and calves, leaving you rejuvenated and relaxed.
Stimulates blood circulation, thereby preparing and warming your muscles.
Relieves tension and reduces stress.
Relieves sore and tired legs.
Page 3
USAGE INSTRUCTIONS
Page 4
OPERATION INSTRUCTIONS OF CONTROL PANEL
To Activate the Kneading Discs only
1. Place the lower section of your legs into the fabric-covered slots.
2. Press the (kneading) button and the default mode will be 'I' (rhythmic squeeze).
3. Press the button again, and the mode will switch to 'II' (rhythmic squeeze 2).
4. Press the button again, and the mode will switch to 'III' (continuous squeeze).
5. Press to start infrared heating function, to get the heat treatment effect.
6. Press the button again to stop the kneading process, or press the (stop)
button on the control panel anytime to terminate the kneading process.
Caution
• Do not stand on, or exert excessive pressure on the massager. This may
significantly slow down or stop the motor, potentially causing overheating or
subsequent damage to the massager.
• The total recommended usage time of the massager is 15 minutes.
• Press the “stop” button to terminate the massager if discomfort is experienced. The
4 pairs of discs will not stop instantly, as they will continue to complete the last
kneading cycle before returning to their “home” position.
• Some users may experience itchiness on their feet during and after the massage.
This is normal and is a result of improved blood circulation.
Safety
• Do not use the massager in an excessively humid environment such as the
bathroom.
• Do not use the massager on a wet body. This may result in a short circuit or an
electric shock.
Page 5
Suitability of User
• The following users must consult their doctor before use;
• Those suffering from cancer.
• Those suffering from osteoporosis.
• Those suffering from malignant tumours.
• Those who have a high fever.
• Women who are pregnant.
Safety Precautions during Use
• Do not use the massager for any purpose other than massage. This may result in
accident or injury.
• Do not use the massager when the fabric cover is torn or is missing.
• Do not let children or persons who are not capable of operating the equipment to
operate the machinery.
• Do not stand or sit on the massager itself.
• Do not insert metallic objects or flammable materials into the main body. This may
result in electrocution, short circuit or possible fire.
• Do not use the massager within an hour of mealtime.
• Do not cover the massager during operation. This may result in a rise in motor
temperature and subsequent breakdown or fire.
• Do not unplug or switch of the massager during operation.
• Do not sleep while using the massager.
Instances when the massager should not be used
• In the following circumstances, switch the power off immediately and disconnect the
power supply plug from the electrical outlet:
• If water is spilled on the massager.
• If severe or abnormal pain is felt during the massage, stop operation and consult
your doctor.
• If you detect any malfunction or any other abnormal condition during operation.
• If there is a power failure, injury may occur when power is restored unexpectedly.
• If there is lightning.
Disassembly and Repair
• The massager must only be serviced by the Kogan customer service centre.
• Users must NOT disassemble or repair the massager themselves.
Notes about Power Plug and Cord
• Please check whether the voltage of the power supply suits the adapter standard.
• Do not disconnect the plug from the electrical outlet roughly.
• Do not connect or disconnect the plug from the outlet with wet hands. It may result
in electrical shock or machine trouble.
• When disconnecting the plug, pull it out by holding the plug, not the cord.
• Do not place the power cord under the massager or another heavy object.
• Do not wind the power cord around the massager as it may damage the cord and
result in fire or electrical shock.
• Do not operate the massager with a damaged cord or tamper with the cord.
Contact the Kogan customer support team for information.
• Plus only use the adapter and attachments supplied.
• Do not use the massager if the electrical outlet is excessively loose.
Page 6
Product Care and Storage
• Be sure to remove the plug from the electrical outlet before cleaning the massager.
• Do not use benzene, thinner or any other abrasive solvent on your massager.
• Use a dry cloth when cleaning the massager. Never use a damp cloth to clean the
massager or the power switch.
• When necessary, detach the fabric covers for cleaning to ensure good hygiene.
• When not in use for a long time, it is advisable that the power cord of the massager
be coiled and the massager be stored in a dust and moisture free location.
• Do not store the massager near intense heat or an open flame. Do not leave the
massager under direct sunshine for a long period of time.
Loading...