Page 1
Dummy CCTV Security Camera (2 pack)
KACAMD2BULA
Quick Start Guide
Thank you for purchasing this simulated security camera. These simulated security
cameras have proven to be excellent crime prevention devices. They are being used in
many types of businesses, including motels, factories, convenience stores, parking lots,
museums, real estate companies, auto dealers, apartments, condos, restaurants, and
many others, in addition to residential homes, garages and boat docks.
We suggest that they be mounted in a conspicuous area, high enough from the ground
so that they cannot be reached.
We hope you will be pleased with the simulated cameras; and most important, that they
might deter any crime problem you may have.
Installation
1. Slide camera top towards the back of the camera until the section with writing
disengages from the camera. Remove camera top completely to reveal battery
compartment on top of camera.
2. Open battery lid and insert 2 x AA batteries. Make sure the LED begins to flash
on camera unit before you replace the lid. Replace battery lid and slide camera
lid back into the camera grooves to conceal the battery compartment.
3. Use camera housing base as a template for easy mounting. Position bracket in
desired location. Use a pencil or pen to mark the 3 outer holes of the bracket
base on the wall, drill holes where marks were made on the wall, and insert wall
anchors into pre-drilled holes.
4. Before the camera is attached to the wall, insert about an inch of black tubing
from the back of the camera into the large hole on the mounting bracket to
simulate that the dummy camera is a real wired camera.
5. Position your new simulated camera unit onto your previously drilled holes and
wall anchors and insert screws and tighten securely.
6. Adjust camera angle and direction to suite needs by rotating and pivoting
camera until desired angle is acquired. Tighten camera on the bracket and enjoy.
Disclaimer
This simulated camera is intended only as a deterrent. There is no guarantee, either
expressed or implied, that this camera will protect or prevent criminal action. The
purpose of this simulated camera is to alert anyone of the potential for criminal activity,
and presence of these simulated security devices may contribute to the deterrence of
crime. It is not recommended that these cameras be used as a total replacement for a
real CCTV system.
Loading...