Kogan Kabtsvibraa User Manual

.$%769,%5$$

USER MANUAL

1. User Guide:

A. Functions of buttons:

/■ :Alternate between Play and Pause, and also used in Bluetooth Pairing

/ V-: Press and release this button to skip to the previous track. Press and hold this button to

turn down the volume.

/ V+: Press and release this button to skip to the next track. Press and hold this button to turn

up the volume.

B. Cable mode:

Push the power switch to the far left. A green light will indicate Cable mode setting. Then connect

the USB cable to the computer’s USB port and audio cable to your device’s audio output. If the

rechargeable lithium battery does not need to be recharged, the user need only connect the USB

cable to the audio output.

C. Bluetooth mode:

Step 1: Turn on the power by turning the switch to , and the blue indicator light will flicker three

times.(When it is powered off, the red indicator light will flicker three times)

Step 2: Pairing: Access the Bluetooth function on your Mobile/PC/Pad to search the device

named “HBL_CT09”, press and hold the function button /■ on the speaker, and the red and

blue light will alternately flicker. Most of smart phones will pair up with the speaker automatically

at this point, but certain brand devices may require the user to put in the code “0000” before it can

be connected. In either mode, after the connection (pairing) is made, the blue indicator light will

flicker slowly.

USEFUL TIPS ON PAIRING AND CONNECTION:

 If the red and blue light alternately flickers incessantly, it means “pairing” is not

successfully achieved, and please repeat the “pairing” process.

 Due to the Bluetooth technology limitation, a user may experience failures of Pairing at the

beginning of using this speaker, and here are some useful tips:

a. When device Pairing does not succeed, please make sure Bluetooth function on other

phones/pads/PC near the Speaker have all been turned off except the one you intend

to pair. Otherwise, the Speaker may incorrectly pair itself with another device.

b. For iPhone/iPad users, please go to Settings/General/Bluetooth. If your Bluetooth is

on, the speaker’s name appears in your device list (HBL_CT09), but it shows “Not

Connected”, please click the blue arrow after the device name, and click “Forget this

Device” in next page, then repeat the Pairing Process described in the instruction.

Such failure could happen when the device has paired with a few different devices

previously.

c. For users of other devices, when pairing failure occurs, please access the Bluetooth

setting in your device, then delete the speaker’s name from the list and repeat the

Pairing Process per the instruction manual.

d. Although Bluetooth technology allows two devices in motion to stay connected, the

signal transmission can sometimes be affected by electro-magnetic signals in the

environment. If the connection is lost for a second or two when the playing device is

moving, it is not a quality issue with the speaker. Lost connection can usually be

restored quickly.