Kogan KABABYCAMGA, KABABYCAMBA, KABABYCAMPA User Manual

KOGAN SMARTERHOME™
SMART BABY MONITOR
CAMERA

ANIMAL EDITION

KABABYCAMGA, KABABYCAMBA & KABABYCAMPA

Baby Monitor

Power Adapter

USB Cable

Adhesive Tape

Bracket

Temperature and Humidity Sensor

Screws

User Guide

COMPONENTS

USB Port

Connect to a power supply.

Light

Status

Solid Red Light

Camera is not connected to Wi-Fi.

Blinking Red Light

Awaiting Wi-Fi connection.

Blinking Blue Light

Connecting to Wi-Fi.

Solid Blue Light

Camera is connected to Wi-Fi.

Microphone

Captures audio.

SD Card Slot

Supports local SD Card storage.

Press and hold this button for 5 seconds to reset the device.
If you have modified settings, they will return to factory default settings.

Status Light

USB Port
Reset

Speaker

SD Card Slot

Microphone

OVERVIEW

Status Light

Reset

Tail

INSTALLATION

Place the Camera on a Table

You can position the camera’s tail as required to place it on the table.

Mount the Camera

Fix the camera on a clean surface with the bracket. The bracket can be fixed by screws or
adhesive tape.

1. Mark the positions of the 2 screw holes on the wall surface.

2. Screw 2 expansion screws into the marked position.

3. Fix the mounting bracket to the wall using the screws or adhesive tape.

Fix using screws

Fix using adhesive tape

4. Insert the baby monitor into the bracket from any angle.

CONNECT TO SMARTERHOME™ APP

Install App

Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS).

Register

If you do not have a Kogan SmarterHome™ account, register or sign in with a verification
code sent by SMS.

To register:

1. Tap to enter registration page.

2. The system automatically recognises your country/area. You can also select your
country code manually. Enter your email address and tap ‘Next.’

3. Alternatively, you can select ‘Register by mobile number’ and enter the verification
code sent to you by SMS.

4. Create a profile on the next page to define your location and room.

Set device in pairing mode

When the device is first turned on, it may automatically enter pairing mode which is
indicated by blue light blinking rapidly.

If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by pressing and holding the reset button for 5 seconds until the blue light
begins blinking rapidly.

Add device through network

5. Once registered, tap “+” in the upper right corner of the app’s home page to add a
new device through the network.

6. Select the product type from the list of options in the app (Home Security >
Camera).

7. Ensure that the device is in pairing mode, with the status light blinking blue, and
tap “Confirm indicator rapidly blink”.

Notes:

• The device is only compatible with 2.4Ghz networks.

8. Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important
that your SmarterHome™ device and the app are connected to the same Wi-Fi
network during setup.

9. The device will commence the pairing process and connect to the app. Ensure
your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close
until connection is complete. The status light will turn solid blue indicating the
connection is complete.

10. After successfully being added, you will have the option to rename the device and
assign it to a location. It will now be listed on the app’s home page. Tap the device
listing to enter its control page.

The device and the app have to use the same Wi-Fi network.

•

OPERATION

Temperature and Humidity Sensor

Step 1

• Connect the temperature and humidity sensor to the baby monitor. The sensor is
connected via the USB port.

• Connect the power supply cable to the other end of the sensor.

Step 2

After the connecting to the network, you can read the temperature and humidity of the
room where device is placed/mounted using the SmarterHome™ app.

Functions

Video Flip Flip your video stream vertically anytime for maximum flexibility.

Temperature and
Humidity Sensors

Motion Detection Motion sensors will notify you when movement is detected.

Record

Day & Night Provides day and night vision.

Read your room’s temperature and humidity via the app.

High capacity SD card storage (not supplied) records every
movement.

Day Night

GOOGLE HOME CONTROL

Adding “SmarterHome” to the Google Home app

1. From the home page of the Google Home app, select the “+” icon to access the
‘Add and manage’ page.

2. Select ‘Set up device’, then under the Works with Google banner, select ‘Have
something already set up?’

3. Select the search bar and type ‘Smarter Home’ to locate the Kogan
SmarterHome™ service.

4. Tap ‘Authorise’ to grant Google permission to access the SmarterHome™ app and
your devices.

5. From here, you will be prompted to sign into your SmarterHome™ account using
either your email or mobile phone number, depending on which method you used
to register your account.

6. Once connected, the app will display any compatible devices linked to your

Note:

SmarterHome™ account. From here you can assign them to rooms and set up any
routines.

7. Tap on any of the devices to view a list of available commands.

Please note that Google Home can only control the base/core functions of any
compatible SmarterHome™ devices. To make full use of this product’s smart
functionality, please use the Kogan SmarterHome™ app.

Note:

AMAZON ALEXA CONTROL

You will need to have set up an Alexa account prior to linking your Kogan
SmarterHome™ device.

Adding “SmarterHome” to the Alexa app

1. From the home page of the Alexa app, select the “ ” icon in the top-right and
select Skills & Games from the sidebar.

2. Select the search bar and type ‘Smarter Home’ to locate the Kogan
SmarterHome™ skill.

3. Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa.

4. From here, you will be prompted to sign into your SmarterHome™ account using
either your email or mobile phone number, depending on which method you used
to register your account.

5. Tap ‘Authorise’ to grant Alexa permission to access the SmarterHome™ app and

Note: Alexa can only control the base/core functions of any compatible

please use the Kogan SmarterHome™ app.

your devices.

6. Once connected, the app will perform a search and display the devices linked to
your SmarterHome™ account.

7. When your devices have successfully connected to the Alexa app, you will be able
to control your Kogan SmarterHome™ devices via Alexa’s voice commands.

SmarterHome™ devices. To make full use of this product’s smart functionality,

Problem

Possible Solution

• Ensure the device is within the range of both your

of this user guide.

The resetting of the device only resets the network

from the app’s settings.

• Reset the device by long pressing the reset button for

to Smarterhome™ App section of this user guide.

• Ensure the push notifications are enabled in the app

settings.

TROUBLESHOOTING

The device cannot be accessed
via app.

This device is shown in the list of
devices in the app even after
resetting the device.

The device is not detected after
changing the router

The device is not identifying the
SD card.

No notifications from the device.

router and connected smartphone.

• Wi-Fi is not connected, reset device by long pressing
the reset button for 5 seconds. Reconnect it with the
app. Check the Connect to Smarterhome™ App section

configuration of the camera but cannot change the
configuration on the app. You must remove the device

5 seconds.

• Remove the device from the app’s settings.

• Reconnect the device to the app. Check the Connect

• Ensure to plug in the SD card before the power supply

is switched on.

• Confirm whether the SD card format is FAT32.

settings.

• Ensure the app is running in your smartphone. Confirm
the motion detection alarm is enabled in the app

General

Power Supply

DC 5V, 1A

Rated Voltage

DC 5V

Operating Temperature

-20°C to 50°C

Dimensions

53 x 32 x 280mm

Weight

50g

SD Card Storage

Max. 128GB

Camera

Image Sensor

1/2.9''2 Megapixel CMOS

Effective Pixels

1920 (H) x 1080 (V)

Shutter

1/25~1/100,000s

Colour 0.01Lux @ F1.2
Black/White 0.001Lux @ F1.2

IR Distance

Night visibility up to 10m

Day/Night

Auto (ICR)/Colour/Black/White

WDR

DWDR

Lens

3.6mm @ F2.0, 105°

Video and Audio

Compression

H.264

Bit Rate

32Kbps~2Mbps

Audio Input/Output

Built-in Microphone and Speaker

Network

Alarm Trigger

Intelligent motion detection

Communication Protocol

HTTP, DHCP, DNS, TCP/IP

Interface Protocol

Private

Wireless

2.4G WIFI (IEEE802.11b/g/n)

Supported Mobile Phone OS

iOS 8 or later, Android 4.2 or later

Security

User authentication, software encryption

Min Illuminance

NOTES

Need more information?

We hope that this user guide has given you

the assistance needed for a simple set-up.

For the most up-to-date guide for your product,

as well as any additional assistance you may require,

head online to help.kogan.com