Phillips head screwdriver, antenna cable, broadband internet connection.
3
Page 3
REMOTE CONTROL OVERVIEW
1
1
3
4
4
6
5
7
7
9
8
10
1.POWER: Turn on the TV/Standby.
2.
AUDIO: Switch the audio channel
when DVD or multimedia playing.
:In the TV condition, press this
I/II
button to select the stereo mode.
3.SLEEP:
4.SUB:
Select subtitle of media video
file.(needs the support of disk or file
5.FAV: Show the list of favourite
channels.
6.NUMBER KEYS:
Change the
channel directly.
2
5
8
11
12
7.DTV/RADIO:
In DTV mode, press
DTV/RADIO button to enter DTV
or RADIO mode.
8.
: Return to the previous
channel tuned.
9.MUTE:
10. VOL:
Mute or restore the sound.
Increase and decrease volume.
11.CH: Next and Previous channel.
12. REPEAT:
Repeat mode.
4
Page 4
5
8
12
7
12
8
11
7
10
9
13
15
14
15
16
14
17
18
19
22
23
26
27
13. INFO:
Show information about
the current program.
14. SOURCE:
Press to change
signal source.
15. NAVIGATION KEYS (Up, Down,
To move in the
menus and confirm settings.
16. MENU: Display menu page.
17. EXIT:
Exit the Menu.
18. P.SIZE:
picture size.
: Displays the main index in
Teletext mode.
20
21
24
25
28
28
29
21. P.MODE:
:
Displays the top, buttom or all of page.
Output image mode selection.
: Play/Pause.22.TS: In DTV mode, press TS button
to start the delay function, press
the button to start playing delay
program, press the button to
terminate the delay functions.
23.
: Stop playback.
24. TEXT:
Teletext function.
25. REC/ : In DTV mode , press
REC button to start recording,
press button to stop recording.
GUIDE: Show the Electronic
19.
Program Guide.
: Reveals hidden information such as
the answers to a quiz in TELETEXT
mode.
20. S.MODE: Setting audio options.
:
Freeze a multi-page changing on
Teletext mode.
: Previous file or chapter.26.
: Next file or chapter.27.
28.
: Fast forward playback.
29.
: Fast rewind playback.
Press the appropriate colour to
direct access functions in
TELETEXT or EPG OSD mode.
5
Page 5
ASSEMBLY AND INSTALLATION
BEFORE YOU GET STARTED
Spread cushioning flat to lay the TV on. This will help to prevent damage.
1. Stand assembly
a. Attach stand to base of TV.
b. Rotate 90 ° in the direction of the arrow.
c. Repeat these steps for second stand.
1c
1a
1b
2. Remote control assembly
a. Open the battery compartment cover on the back side.
b. Insert two 1.5V AAA size batteries, making sure to match the polarity
markings (+ / -) of the batteries with the diagram inside
the compartment.
c. Replace battery compartment cover.
2a2b2c
6
Page 6
3. Connect to antenna
ANT
USB 2.0
(5V / 500mA)
AUDIO OUT
DIGITAL
AUDIO OUT
R -AUDIO- LVIDEO
AV
a. Connect an antenna cable (not supplied) via the ‘ANT’ input port at
the back of the TV.
b. Ensure the antenna cable is also connected to a working antenna,
either via an antenna wall socket in your home, or directly.
Antenna
wall socket
3b
3a
Antenna cable
(not supplied)
4. Turning TV on
Plug the power cord into a suitable power outlet, then press the
POWER (
) button on the remote control, making sure to aim it at the
sensor at the front of the TV. Alternatively, you can press the power
button on the lower side of the back panel on the TV.
TURNING TV OFF
Press the
To power down the TV completely, unplug the power cord from the power
outlet.
Do not leave your set in standby mode for long periods of time. If you will
not use the TV for a long time, it is recommended to unplug the set from
both the power outlet and aerial.
POWER ( ) button on the remote control to enter standby mode.
7
Page 7
SETTINGS
When turning the TV on for the first time, the Setup Wizard screen will
appear. Use the ▲, ▼ and OK buttons to navigate the following options.
Select Language
Press / button to select the language to be used for menus
and message.
S
elect Country
Press ▼ / ▲ button to highlight country menu.
Press / button to select the country you want to.
Select Environment
Press / button to select the environment.
Auto Tuning
Select Input Source
Press SOURCE button to display the input
source list, Press ▼ / ▲ or SOURCE button
to select the input source you want to, Press
OK button to enter the input source, Press
EXIT button to quit.
8
Page 8
BASIC TROUBLESHOOTING
Poor picture and sound quality
• Try a di
• Adjust the antenna
• Check all connections
No picture or sound in TV status
• Try another channel
• Press the TV/AV button
• Make sure TV is plugged in
• Check the antenna connection
No sound or sound is too low at
maximum volume
• Check the volume settings on any
external speakers connected to your
television
• Adjust the TV volume accordingly
• Check another channel or input
• Check that MUTE hasn’t been
turned on
No colour, wrong colour or tints
• Make sure the program itself is
broadcast in colour
• Select the picture menu, then adjust
the colour and tint submenus
erent channel
Remote control malfunc
• Replace remote control batteries
• Check battery terminals
• Remote is out of range, move closer
to TV
• Remove any obstructions between
remote and IR sensor of TV
• Make sure the power cord to your TV
is plugged in and turned on
Image is not centred on the screen
• Adjust the horizontal and vertical
position
“No Signal” on HDMI source
• Test the device with a di
cable
• Plug the device into an
port
• Try a di
the same cable and port
• Perform a factory reset on your TV
For our full TV troubleshooting guide
and extended User Manual for this
TV, head online to help.kogan.com
erent device connected to
tions
erent HDMI
other HDMI
Picture rolls vertically
•
Check all connections
Blurred or snowy picture, distorted
sound
• Check direction, location and
connections to your antenna
• Issues may be caused by the use of
an indoor antenna (poor signal)
9
Page 9
10
Page 10
11
Page 11
Need more information?
This is a Quick Start Guide, and while we hope that this
has given you the assistance needed for a simple set-up,
a full user guide outlining all of this product’s instructions
and features can be found online at help.kogan.com
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.