Kogan DVR013N User Manual
HD Car Camera User Manual
Out Line:
This is an advanced technology, high-definition digital video recorders; This machine is not
just an ordinary HD video recorder but also a professional driving recorder. The machine
using TF memory card, compact, and low power consumption,the HD camera can perfectly
take more minute details. The videos also can be directly transferred via the HDMI cable or
AV cable with HD output LED TV playback.
Product Features:
◎ 1.0Mega pixels
◎ 2.0-inch high-definition screen can playback video
◎ support HDMI output, AV_OUT output
◎ The machine is equipped with a special suction cup bracket, easy to install and use
◎ G-sensor is to record the sensor data
◎ super-protected file function, even in the process of recording, when a power outage or
damage to the machine, the video file will be automatically saved
◎ When car start automatically start recording function
◎ Automatic loop recording, can be set for each video file time
◎ Watch the video in the process of driving to support the scene playback
◎ Save display time and date, without reset when rebooting
◎ Set recording time, when the time is ok, it stop recording
◎ USB charging function
◎ PC-CAMERA can be used as camera
◎ maximum support 32GB TF card
Product pictures and function:
1.Lens
2. Speaker holes
3. AV _OUT
4. Power Button(short press power on,
long press off)
5. Menu key
6. Mode conversion key
7. HDMI output
8 reset button
9. Microphone
10 bracket seat
11.2.0 inch display
12. Up button(fast forward button)
13. Down button (rewind key)
14. Video / camera button
15. Work (blue) / charging indicator (red)
16. USB interface
17. TF card slot
Two Charging mode:
Using built-in rechargeable polymer battery
Charging way: 1) connect with car charger, 2) using a USB cable to the computer for charge
A) Car charger
After the vehicle is started, the machine will automatically enter the recording mode, the
machine can be charging while recording.
You also can manually turn off the camera, the recorded files will be saved automatically.
The red indica tor light in the process of charging, show full grid display battery icon when
charging is complete.
Note: The machine can only be compatible with car charger of output 5V !
Function Introduce
DVR with video / camera / playback function, can choose the function mode you need.
A) Video mode
Short press the power key or connected to the car charger to enter into the video , the DVR
enter into the video mode and start video recording (Note: before use, first insert TF
card,when the screen prompts "memory error", please use the native format the TF
card)
Meantime the red dot showed on screen's top is flashing,the white digital 00:00:00 showed
on the screen top right is changed into red,
recording files are stored on the card, when press the OK button to stop recording, the red
digital time display white .
B) camera mode
Boot and press the MODE ke y to enter into the camera mode, press the OK button to take
pictures
C) playback mode
Boot and press the MODE button twice to enter into the preview mode
Preview turned up / down button to select the desired file, press the OK button "Play / Pause,
when play,press fast forward button(12) to fast,press backward button(13) to bac kward,
(Note:playback mode status,play video,fast forward/bac kward the video decoding need
a buffer,so there will be a brief pause phenomenon is a normal phenomenon)
USB / PC CAMERA mode:
Connecting the machine to a computer by USB cable, the machine's display will pop up on
the "memory" "camera".
press up / d own button to select "Memory" , then press OK button to enter into USB mode,
open fi le of My Computer,it appears removable disk. All files of icons are stored in the
DCIM folder in the removable disk, you can copy the files in the machine to the computer.
(Note: some video playback software in the computer does not support thumbnail
mode, so it appear the thumbnail of snow screen / green screen phenomenon, but it
does not affect the video normal playback)
Press up / down button key to select the "camera",press OK button to confirm to enter into
PC CAMERA mode
Focus function:
In camera mode or recording mode, press Up /Down button, the screen will display the focus
multiples icon,and then press up/down button to choose needed focus multiple (1 times -4
times).
AVOUT / HDMI output test:
After boot,the TV's AV/HDMI cable connect into corresponding interface of the product
Boot with AV and HDMI LCD TV AV / HDMI cable to connect the cable into the
corresponding interface of the product,the machine will automatically switch to playback
mode;meantime the product's screen don't show anything,, but LCD TV screen has
corresponding show
(Note: AV_OUT and HDMI output can not be used simultaneously, and enter into the
playback mode only)
G-SENSOR (the collision sensing function):
Plug car charging machine will automatically start recording state, the gravity sensors
measuring dynamic acceleration due to gravity, vibration sensed vehicle collision direction
(left - right - front - rear) and mobile vehicle collision. Serious vehicle collision, the display
will show the icon of the character prompted, start collision sensing; lock icon White
represents that important accident video has been delayed to the end process all saved, and
then resume the normal screen video work state.
Note: In the event of a serious vehicle collision, the collision sensors start automatically
saved can be used as an evidence of the accident for some important video file. (This
file is not overwritten deleted)
G-SENSOR function as a cycle time, to save the contents of the cycle time segment, the
icon disappears, restart from the next time period.
Menu function settings:
Turned on, press the Menu button to enter the camera Mode setting inte rface, Press
Up/Down buttons to select the listed settings, press the OK button to enter the set fun ction
parameter interface, turn the button and press up / down to select their specific para meter,
and finally press OK to exit.
1) Resolution: 720P (1280 * 720) WVGA (848 * 480) QVGA (320 * 240) VGA (640 * 480)
2) Cycle Recording: OFF 3 minutes, 5 minutes, 10 minutes
3) Motion detection: OFF / ON
4) Recording audio: OFF / ON
5) Exposure Value: +2.0 +5 / 3 +4 / of 3 +1.0 +2 / 3 + 1/3 +0.0 -1 / 3 -2 / 3 -1.0 -4 / 3-5 / 3
-2.0
6) Time Display:: Off / On (Time watermark of video recording)
7) G-Sensor: Off 2G 4G 8G
Power on, press Mode button to enter the camera Mode, press the Menu button to enter the
camera settings interface, press OK button to enter the set function parameter interface, and
then press up / down buttons to select specific parameters, press the OK button to exit.
1) Resolution: 12M (4000 * 3000), 10M (3648 * 2736), 8M (3200 * 2400), 5M (2592 *
1944), 3M (2048 * 1536), 2M HD (1920 * 1080), 1.3M (1280 * 960), VGA (640 * 480)
2) Image quality: High, Medium, Economy
3) Sharpness: strong /standard/ soft
4) White Balance: Auto/ Daylight/ Cloudy/ Tungsten/ Fluorescent
5) Color: Normal/ Black and white/ Retro
6) ISO: Auto 100 200 400
7) Exposure Value : +2.0 +5/3 +4/3 +1.0 +2/3 +1/3 +0.0 -1/3 -2/3 -1.0 -4/3 -5/3 -2.0
8) Time display: Off, Date, Date / Time (Time watermark of taking pictures)
Power on, press Mode button twice to enter the playback Mode, press the Menu button to
enter the Playback Settings interface, press OK button to enter the function parameter
interface, and then press Up / Down button to select specific parameter, press OK button to
exit.
1) Delete: Yes, No, Delete All.
2) Protection: Yes, No.
3) Volume: Mute/ Volume1/ Volume2/ Volume3/ Volume4/ Volume5/ Volume6 / Volume 7
Under Recording Mode or Camera Mode, press the Menu button again, DVR will enter the
setting interface, Press up / down button to select their specific parameter, and finally press
the OK button to exit.
1) Date / Time: Press up/down button to select the date / time, press OK button to enter the
setting interface, press the Menu button to select the year / month / day / hour / minute /
second, press up/down to adjust, finally press OK button to exit.
Note: before setting time, press up/down to select: [ year / month / day], [date / month / year]
And [month / day / year].
2) Automatic shutdown: off, 2 minutes, 5 minutes, 10 minutes
3) Screen protection: off, 1 minute, 3 minutes, 5 minutes.
4) Key tone: Off / On
5) Language: English / Simplified Chinese / Traditional Chinese / Japanese / Russian /
French / German / Italian / Spanish / Portuguese
6)Frequency: 50HZ 60HZ
7) TV system: NTSC PAL
8) Default settings: Press the OK button to enter, press up / down buttons to select the cancel
/ confirm, press the OK button to exit.
9) Format: memory SD card
10) Version: press OK button to enter, display the current version.
Download:
Connect the product with computer by USB cable.
[My computer] will occur removable disk.
Download file from “DCIM”” file.
Note:
1) When the screen show "memory error", please use the machine to format TF card.
2) Power on, light blue. Blue light flashing when recording; Red light lasting when charging,
Red light off when charging full.
3) Under recording Mode, when u choose cycle recording, the device will continue to record
when memory card is full. Remark: The ca mera file will be overwritten one by one. In order
to avoid all the old files deleted, the device offers 3 minutes / 5 minutes / 10 minutes for a
section for users to choose.
4) "low battery" and icon on the screen occurs when the polymer battery low,
and you should charge the machine, or five seconds later, the DVR will automatically save
the file and automatically shut down.
5) When you need to reset your DVR, press the RESET button, DVR will automatically
reset.
6) Connect the machine to the computer with a USB cable, u will find memory / camera to
choose. (Note: entering the memory / camera, the display will be dark
）
7) Power on, shortly press the power button, LED lamp turned on. press the power button
again, LED lamp turned off. (Note: After Power on, you need to press the power button
twice If the first time you turn on the LED lights ).
8) POWER button is for LED on / off shortcuts, can not achieve two functions
Loading...