Page 1
12,000mAh Portable Jump Starter
CTJMPST12KA
Quick Start Guide
Table of Contents
Overview ...................................................................................................................................................................... 2
Operation ..................................................................................................................................................................... 2
Specifications ............................................................................................................................................................. 4
In the Box ..................................................................................................................................................................... 4
1
Page 2
Overview
1
Power switch
2
Power indicator lights
3
Master ON/OFF switch
4
DC 12V output
5
USB output 5V/2.1A
6
EC5 output for jump starting
7
LED lights
8
15V/1A input
Indicator
Lights
4 Off
1 Solid ON
2 Solid ON
3 Solid ON
4 Solid ON
Capacity
0%
25%
50%
75%
100%
Operation
Indicator Lights
Press the power switch lightly to check the remaining battery capacity.
While the jump starter is being charged, the indicator lights will flash one by one until it is at
full charge. All 4 indicator lights will stay on when the jump starter is fully charged.
How to Turn on the LED Light
Press and hold the Power button for 3 seconds to turn on the LED light. Once the LED light is
turned on, double pressing the power button will cycle through additional modes.
(Solid lightStrobe lightSOS flashingOFF)
2
Page 3
Charging the Jump Starter
1. Plug the AC adapter to the AC electrical socket.
2. Insert the adapter plug into the DC input port of the device or insert the car charger
into the car charger port.
3. Insert the other end of the car charger into the DC input port of the device.
Jump Start a 12V Car
1. Make sure the battery capacity of the jump starter is above 50%. (at least two
indicator lights ON)
2. Connect the red battery clip to the battery’s positive pole (+) and black clip to the
battery’s negative pole (-).
3. Insert the battery clips plug into the car jump port of the portable jump starter.
4. Start the car.
5. Disconnect the battery clip plug from the car jump port of the portable jump starter.
6. Disconnect the red and black battery clip from the battery’s positive and negative
poles.
Warning: Do not touch the red and black clamps together or connect both to the same piece
of metal to prevent physical injury and damage to the vehicle. Do not use the jump start cable
for any other purpose.
Always keep away from children.
3
Page 4
Charging Mobile Phone or other USB devices
Weight
400g
Output
5V/2.1A, 12V/2A
Dimensions
170x80x38mm
Start current
300A
Input
DC 15V/1A
Peak current
600A
1. Choose the appropriate charging cable for your device from the provided
Phone/Micro USB/Mini USB cable.
2. Plug the USB port of the charging cable into the USB 5V output port of the device.
3. Connect the other end of the cable to your device.
4. Press the power switch and charging begins.
Note: The USB indicator light will stay on when charging, if it doesn’t charge the device for
more than 3 seconds, the USB indicator light will automatically turn off.
Warning: Using other cables may damage your device, or the jump starter.
Specifications
In the Box
Accessories
Heavy-Duty Jump Start
Cables
DC Adapter Charger
AC to DC Adapter Charger
Phone/Micro USB/Mini USB
Vehicle Charging Adapter
User manual is subject to change without notice. For the latest version of your user manual, please visit
https://www.kogan.com/usermanuals/
4
Loading...