Kogan Agora KALED553DSMTZA, KALED473DSMTZA, KALED32SMTZA User Manual

KALED553DSMTZA
USER MANUAL
The screen and cabinet get warm when the TV is in use. This is not a malfunction.In case of smoke, strange noise or strange smell from the unit:
· Turn off the power switch immediately;
· Disconnect the power plug from the power outlet;
· Contact your dealer or service centre. Never attempt to make repairs yourself because this could be dangerous.
High Voltage Do not open
Risk of electronic shock, do not open. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
CAUTION
Important Safety Instructions
Important Safety Instructions and Maintenance
Never push objects of any kind into the set through the cabinet slots as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the set. Use special caution in households where children are present. The apparatus is not suitable for children under 3-year to operate.
To reduce the risk of fire or electric shock, do not expose this product to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
1
If the following problems occur: Turn off the TV set and unplug the AC power cord immediately if any of the following problems occur. Ask your dealer or service centre to have it checked by qualified service personnel When:
- AC power cord is damaged.
- Poor fitting of AC power outlet.
- TV set is damaged by being dropped, hit or having something thrown at it.
- Any liquid or solid object falls through openings in the cabinet.
Do not overload wall outlets, extension cords or adaptors beyond their capacity, this can result in fire or electrical shock. Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance. The mains plug is used as the disconnect device. It shall remain readily accessible and should not be obstructed during intended use. Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug when pulling the plug from the outlet, do not pull the plug out by the wire. NEVER touch the plug or power cord with wet hands. To disconnect the apparatus from the mains power, the plug must be pulled out from the mains socket, therefore make sure the mains plug is always easily accessible.
Important Safety Instructions and Maintenance
Important Safety Instructions
When not in use
If you will not be using the TV set for several days, the TV set should be disconnected from the AC mains for environmental and safety reasons. As the TV set is not disconnected from the AC power when the TV is turned off at the standby switch, pull the plug from the AC power outlet to disconnect the TV completely. However, some TV sets may have features that require the TV set to be left in standby to function correctly. In the case of lightning,
unplug the TV set from the outlet immediately. Never touch the antenna wire during lightning.
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.Ensuring the television is not overhanging the edge of the supporting furniture.
Installation
The ventilation should not be impeded by covering the ventilation opening with items, such as newspapers, tablecloths, curtains, etc. At least 10 cm space should be left around the apparatus for sufficient ventilation.
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. Place the apparatus in such a position that the screen is not exposed to direct sunlight. It is best to have soft indirect lighting while watching and avoid completely
dark environments and reflection from the screen as
these may cause eye fatigue. Keep the TV set away from any equipment emitting electromagnetic radiation.
Do not pull the plug out by the wire; Never touch the plug with wet hands.
Excessive from earphones and headphones volume can cause hearing loss.
2
To avoid the fire, no naked flame source, such as lighted candles, should be placed on the apparatus.
Do not push or scratch the front filter, or place any objects on top of the TV set. The image may be uneven or the screen may be damaged.
Important Safety Instructions and Maintenance
Installation
Do not place this apparatus near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or a swimming pool; and the like;
When the TV being moved in from cold place, it needs some right time for dew inside unit evaporating fully before turn on the unit;
Cleaning and handling the screen surface and cabinet. Disconnect the unit from the AC outlet before cleaning. To remove dust, wipe gently with a soft, lint free cloth. If required use a slightly damp cloth.
Do not place the set on an unstable cart, stand, table or shelf. The set may fall, causing serious personal injury as well as damage to the product. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
3
Cleaning
Move
LED Screen Although the LED screen is made with high precision technology and 99.99% or more of the pixels are effective, black dots may appear or bright points of light (red, blue or green) may appear constantly on the LED screen. This is a structural property of the LED screen and is not a malfunction.
If the surface of the LED panel cracks, do not touch it until you have unplugged the AC power cord. Otherwise electric shock may result. Do not throw anything at the TV set. The LED panel may break from the impact and cause serious injury.
Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. Do not display still images and partially still images on the LED panel for more than 2 hours as it can cause screen image retention. This image retention is also known as "screen burn". To avoid such image retention, reduce the degree of brightness and contrast of the screen when displaying a still image. Watching the LED TV in 4:3 format for a long period of time may leave traces of borders displayed on the left, right and centre of the screen caused by the difference of light emission on the screen. Playing a DVD or a game console may cause a similar effect to the screen. Damages caused by the above effect are not covered by the Warranty. Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images. To prevent this effect, reduce the 'brightness' and 'contrast' when displaying still images.
MAINS PLUG
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.
Use care not to subject the TV's surfaces to detergent. (A liquid inside the TV could lead to product failure, fire or electrical shock.) Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances as this may deteriorate the surface and finish of the cabinet.
solvent
thinner
solvent
thinner
Table of Contents
Important Information
4
Accessories-----------------------------------------------------------------------------------------------5 Introduction-----------------------------------------------------------------------------------------------6
Features---------------------------------------------------------------------------------------------------------6 Specifications--------------------------------------------------------------------------------------------------7 Stand and wall-mounting instructions (optional)------------------------------------------------8
--------------------------------------------------------------------------------10 General Description
Overview of back panel------------------------------------------------------------------------------------10 Overview of front panel-------------------------------------------------------------------------------------11 Overview of remote control-------------------------------------------------------------------------------12 Teletext --------------------------------------------------------------------------------------------------------14 Installing Batteries in the Remote Control------------------------------------------------------------16
External Connection------------------------------------------------------------------------------16
Antenna connection----------------------------------------------------------------------------------------16 Connecting VCR -------------------------------------------------------------------------------------------17 Connecting a Camcorder---------------------------------------------------------------------------------18 Connecting a DVD Player/Set-Top Box via DVI ----------------------------------------------------19 Connecting DVD Player/Set-Top Box via HDMI ----------------------------------------------------20 Connecting Digital Audio System-----------------------------------------------------------------------21 Connecting PC ---------------------------------------------------------------------------------------------22
Supporting signals ---------------------------------------------------------------------------------------22
Basic operation---------------------------------------------------------------------------------------23
Turning the TV on and off---------------------------------------------------------------------------------23 The main interface------------------------------------------------------------------------------------------24 Applications of the TV--------------------------------------------------------------------------------------25
Menu system instruction-----------------------------------------------------------------------26
TV menu-------------------------------------------------------------------------------------------------------26 Sound----------------------------------------------------------------------------------------------------------26 Image-----------------------------------------------------------------------------------------------------------28 Program-------------------------------------------------------------------------------------------------------29 Input Source--------------------------------------------------------------------------------------------------31 3D---------------------------------------------------------------------------------------------------------------31
Function-------------------------------------------------------------------------------------------------------32 Time------------------------------------------------------------------------------------------------------------34 PVR-------------------------------------------------------------------------------------------------------------35
Digital Media Player --------------------------------------------------------------------------------------38 Troubleshooting -------------------------------------------------------------------------------------------42 Picture defects and the reason------------------------------------------------------------------------44
Keep small accessories out of reach of children so they are not mistakenly swallowed.
Please make sure the following item is included with your LED TV. If the remote control is
missing, contact the Kogan support team.
Accessories
5
Remote Control
HOME
Note: Detail operation please refer to HELP menu on the TV.
Features
Introduction
Input terminals used for external equipment connection
1 x ANTENNA jack 4 x HDMI inputs 1 x computer PC-RGB input 3 x USB inputs 1 x COMPONENT input 1 x CVBS output 1 x AV input 1 x SPDIF output 1 x Headphone output
TV adopts 47”/55” TFT display screenLED Zero X radiation complies to green environment protection requirement Connect to computer directly to realize TV/monitor combo. MHL2.0 Android4.2 USB3.0 16:9 wide screen Auto tuning and fine tuning HDMI input Component Compatible (480i; 480P; 576i; 576P; 720P; 1080i; 1080P) PC VGA Programmable sleep timer Wide range voltage input No-signal automatic power off
6
Note:
- Design and specifications are subject to change without notice.
- Weight and Dimension shown are approximate.
o
- It is suggested to watch 3D program under the operation temperature above 10 C to
obtain the best 3D effect.
Introduction
Specifications
7
Display size
LED panel resolution
Power supply
TV receive system
Frequency range
Video in
Antenna Input
Speaker output power
Power consumption
Standby consumption
Work Temperature
Model
Controller power
Analog: Antenna:
46.25MHz-855.25MHz Digital:5-12, 21-69
PAL / NTSC / SECAM
95W
0°C-40°C
<0.5 W
~110-240V, 50/60Hz
75 ohms, unbalanced
47” Diagonal (max.)
DC 3V (Two AAA size batteries)
1920X1080
1081×6 1×641mm
14.7Kg
1081×2 50×695m m
17.9Kg
KALED47 3DS MTZA
Digital: DVB-T Analog: PAL: BG, I, DK, SECAM: BG, D/K
Analog: Antenna:
46.25MHz-855.25MHz Digital:5-12, 21-69
PAL / NTSC / SECAM
120W
<0.5 W
~110-240V, 50/60Hz
75 ohms, unbalanced
55” Diagonal (max.)
DC 3V (Two AAA size batteries)
1920X1080
1254X61X738mm
19.2Kg
1254 X275X 792mm
22.4Kg
KALED55 3DS MTZA
Digital: DVB-T Analog: PAL: BG, I, DK, SECAM: BG, D/K
0°C-40°C
Stand and wall-mounting instructions (optional)
8
How to assemble the stand
If you need to remove or assemble the stand please read the following instructions.
- Before attaching/detaching the stand, make sure to turn off the TV.
- Before performing work, spread cushioning over the base area to lay the LED TV on. This will prevent it from being damaged.
Assembling instruction:
1) Assemble connection bracket, glass stand part and metallic gasket together as figure 1 shown, then fasten them with 4 self-tapping screws.
2) Fasten the assembled stand to TV set and fix correctly as figure 2 shown
Securing the TV Stand
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions at the start of
this manual. For added stability, install the anti-fall device for safety purposes,
as follows.
B-ST4*30
B-M4*10
Figure 2
Figure 1
Screws(B-ST4*30)X4
Screws(B-M4*10)X5
Loading...
+ 37 hidden pages