Koehler K34710, K34712, K34711 Operation And Instruction Manual

Brookfield Viscosity Liquid Bath

K34710, K34711, K34712

Operation and Instruction Manual

REV A

Koehler Instrument Company, Inc.

1595 Sycamore Avenue • Bohemia, New York 11716-1796 • USA

Toll Free: 1-800-878-9070 (US only) • Tel: [phone] • Fax: [phone]

http://www.koehlerinstrument.com • e-mail: [e-mail]

Petroleum Testing & Analysis Instrumentation • Custom Design & Manufacturing

CERTIFICATE OF CONFORMANCE

Low Temperature Brookfield Viscosity Bath, BVS3000

K34710, K34711, K34712

This certificate verifies that part numbers K34710, K34711, K34712 Low
Temperature Brookfield Viscosity Bath, were manufactured in conformance
with the applicable standards set forth in this certification.

Specifications: ASTM D2983

IP 267 Method A
ISO 9262
CEC-L-18A

This unit is tested before it leaves the factory, to ensure total functionality
and compliance to the above specifications and ASTM standards. Test and

inspection records are on file for verification.

Jesse Kelly
Application Engineer
Koehler Instrument Company

K34710, K34711, K34712 Brookfield Viscosity Liquid Bath

Operation and Instruction Manual

Table of Contents

1 Introduction .........................................................................................2

1.1 Koehler’s Commitment to Our Customers ............................................................. 2

1.2 Recommended Resources and Publications ......................................................... 2

1.3 Instrument Specifications ....................................................................................... 3

2 Safety Information and Warnings ......................................................3

3 Unpacking & Installation ....................................................................4

3.1 Packing List ............................................................................................................ 4

3.2 Unpacking .............................................................................................................. 4

3.3 Instrument Installation ............................................................................................ 4

4 Instrument Descriptions .....................................................................5

4.1 Temperature Controller Operation ......................................................................... 6

5 Operation .............................................................................................7

5.1 Viscosity Bath ......................................................................................................... 7

5.2 Testing Procedure .................................................................................................. 7

6 Safety Features ...................................................................................7

6.1 Over Power Protection ........................................................................................... 7

7 Maintenance ........................................................................................7

7.1 Routine Maintenance ............................................................................................. 7

7.2 Replacement Parts................................................................................................. 7

8 Service .................................................................................................8

9 Storage .................................................................................................8

10 Warranty ...............................................................................................8

11 Returned Goods Policy.......................................................................8

K34710, K34711, K34712-Manual

-1-