Koden MDC-2200 series, MDC-2500 series, MDC-2240, MDC-2540, MDC-2260 Specifications
...
09.01 Printed in Japan
Safety
precaution
To ensure proper and safe use of the equipment, please carefully
read and follow the instructions in the Operation Manual.
Tamagawa Office:
2-13-24 Tamagawa, Ota-ku, Tokyo, 146-0095 Japan
Tel: +81-3-3756-6501 Fax: +81-3-3756-6509
Uenohara Office:
5278 Uenohara, Uenohara-shi, Yamanashi, 409-0112 Japan
Tel: +81-554-20-5860 Fax: +81-554-20-5875
• Design and specifications are subject to change without notice.
For details, please contact:
www.koden-electronics.co.jp
overseas@koden-electronics.co.jp
Display unit:
Standard Equipment
Model
MDC-2240 / 2260 / 2210 / 2220 MDC-2540 / 2560 / 2510 / 2520
Display size/type 12.1" color TFT LCD 15" color TFT LCD
Effective diameter 184 mm 228 mm
Display resolution 1024 x 768 pixels
Off-centering Max. 66%
Echo area 2 types (Full screen, Inside of effective diameter)
Range data accuracy
8 meters or 1% of the range scale selected, whichever is the greater
Range scale
0.125, 0.25, 0.5, 0.75, 1, 1.5, 2, 3, 4, 6, 8, 12, 16, 24, 32, 36, 48, 72, 96 nm
4 kW: up to 48 nm, 6 kW /12 kW: up to 72 nm, 25 kW: up to 96 nm
Presentation modes Head-up, North-up*, Course-up*, True motion*
Functions Interference rejection, Target expansion, Zoom, 2 VRMs,
2 EBLs (0.1° step), Floating EBL / VRM, Cursor position,
Parallel cursor, Bearing, Day / Night mode, Alarms, Trail*,
Past course*, Mark*, Route*, Dual station, RGB Monitor output,
Slave display monitor output, Nav line, Ship’s profile,
External buzzer
Input data format and sentences
NMEA 0183
(BWC, DBT, DPT, DTM, GGA, GLC, GLL, GNS, HDG, HDM, HDT,
MTW, RMA, RMB, RMC, RTE, VBW, VDR, VHW, VTG, WPL, ZDA)
Output data format and sentences
NMEA 0183
(HDT, VHW, VTG, GLL, VDR, RSD, OSD, TTM, TLL)
NMEA input / output port(s)
3
AIS interface 200 Targets* (Option)
ATA 50 Targets*
Map overlay C-Map NT+ / NT MAX (Owner supplied)
Power supply 10.8 to 41.6 VDC (25 kW: 21.6 to 41.6 VDC)
Power consumption MDC-2240 MDC-2260 MDC-2210 MDC-2220
(at 24 VDC) 80 W or less 110 W or less 130 W or less 170 W or less
MDC-2540 MDC-2560 MDC-2510 MDC-2520
100 W or less 130 W or less 150 W or less 200 W or less
* Requires heading, speed, and / or position signal input from external equipment
including GPS Compass depending on application of user.
RB716A / 717A / 718A
RB719A
Antenna-scanner unit:
MRD-101 (MDC-2200 series)
MRD-102 (MDC-2500 series)
Weight: 12.5 kg (27.5 lb)
EQUIPMENT LIST
For selecting cable, please contact your nearest distributor
Solid lines: Standard devices and connections
Dashed lines: Optional devices and connections
CONNECTIONS
DIMENSIONS AND WEIGHT
Unit: mm (inch)
Weight: 8.2 kg (18 lb)
Weight:
6 feet antenna: 29 kg (64 lb)
9 feet antenna: 33 kg (73 lb)
Weight:
RB716A
3 feet antenna: 21 kg (46 lb)
4 feet antenna: 22 kg (49 lb)
RB717A / 718A
4 feet antenna: 23 kg (51 lb)
6 feet antenna: 25 kg (56 lb)
MAX.450
(17 3/4)
470
(18 1/2)
234
(9 3/16)
280
(11)
104
(4 1/8)
275
(10 13/16)
BOW
220
(8 11/16)
RW701A-06: 1970 (77 9/16)
RW701B-09: 1970 (77 9/16)
(8 11/16)
(9 3/16)
(4 1/8)
(11)
(15 3/8)
MAX.450
390
220
234
280
104
(17 3/4)
BOW
RW701A-03: 1034 (40 11/16)
RW701A-04: 1346 (53)
RW701A-06: 1970 (77 9/16)
Weight: 2 kg (4.5 lb)
Operation unit: MRO-102
Antenna- Antenna RW701A-03 3 feet
scanner RW701A-04 4 feet
unit RW701A-06 6 feet
RW701B-09 9 feet
Scanner RB716A 4 kW
RB717A 6 kW
RB718A 12 kW
RB719A 25 kW
Display unit MRD-101 For MDC-2200 series
MRD-102 For MDC-2500 series
Operation unit MRO-102 For MDC-2500 series
Connecting cable 242J159098B 15 m with connectors on both ends
DC power cable CW-259-2M
Operation manual, Installation material, Spare parts kit
AIS interface, Gyro-Log interface, Power rectifier,
AC power cable, Connecting cable for external monitor
Option
320.7
(12 5/8)
364
(14 21/64)
144
(5 11/16)
94
(3 11/16)
30
(1 3/16)
20
(13/16)
330.6
(13 1/64)
30.5
(1 3/16)
150
(5 29/32)
68
(2 43/64)
196.6
(7 47/64)
385.4
(15 11/64)
171.5
(6 3/4)
99
(3 57/64)
30
(1 3/16)
20
(25/32)
22.5(57/64)
360.7
(14 13/64)
385
(15 5/32)
360.7
(14 13/64)
140.7
(5 35/64)
35
(1 3/8)
40.3
(1 37/64)
57
(2 1/4)
31
(1 7/32)
141.5
(5 37/64)
64.3
(2 17/32)
59
(2 21/64)
MDC-2200 series / 2500 series
12-inch / 15-inch Color LCD
Marine Radar
Water protection IPX5
Operating temperature -15°C to +55°C
Environmental
Model
MDC-2240 / 2540 MDC-2260 / 2560 MDC-2210 / 2510 MDC-2220 / 2520
Antenna length 3 feet 4 feet 4 feet 6 feet 4 feet 6 feet 6 feet 9 feet
Beam width
Horizontal
2.5°1.8°1.8°1.2°1.8°1.2°1.2°0.8
°
Vertical 22°22°22°22°22°22°22°25
°
Rotation 24 rpm or 48 rpm
Power output (peak) 4 kW 6 kW 12 kW 25 kW
Display unit
Radar signal output
(for monitor)
Radar signal input / output
(for dual station)
NMEA 0183 input / output x 3
AIS signal
External buzzer
Power rectifier
PS-010
Operation unit
MRO-102
(for MDC-2500 series)
Optional
cable
100 / 115 VAC
200 / 230 VAC
10.8 to 41.6 VDC
(25 kW: 21.6 to 41.6 VDC)
ATA
AIS interface
AIS-120
Display unit
MRD-101 / 102
Antenna-scanner
unit
Antenna-Scanner unit
SPECIFICATIONS
MDC-2200 series / MDC-2500 series
Tr ue trail function
The display shows exact movement of other vessels like
drawing tails, while land and buoys are shown as stationary objects even while your vessel is moving.
This makes it easy for you to distinguish moving from
stationary objects.
ATA with up to 50 targets as standard
The convenient ATA (Automatic Tracking Aid) function
comes as standard.
The latest movements of other vessels can be shown
instantaneously in vector form and numeric form, ensuring safe navigation.
If the automatic acquisition zone is set, the targets up to
50 entering the zone will be locked automatically.
Map Overlay with
C-Map chart
(NT+ or NT MAX)
C-Map chart NT+ or NT MAX (owner
supplied) is overlaid on the radar
screen to provide clear radar pictures
of coastlines, buoys, and other features.**
Even in Head-up mode, the chart follows smoothly in accordance with
change of the heading of vessel.
Furthermore, waypoints, buoys, and
hazardous targets can be overlaid for
safer navigation.
C-Map NT MAX “World Wide” background chart is built-in as standard.
** Basic chart information only. Extra
features of C-Map such as photo indication are not available.
AIS interface up to 200 targets as option
When connected with an AIS receiver, the radar displays
information on up to 200 targets including the vessel
name, heading, and speed of each vessel with an AIS
transmitter mounted.
Display of other vessels’ tracks to
plotter screen
When connected with a Koden Chart Plotter, other vessels’ tracks locked with the ATA can be plotted on the
screen of plotter.
You can get other ships’ movements at a glance with this
function, which is highly useful and effective for group
fishing operation.
The number of the track plots depends on specification of
plotter.
Wide Variation
Offered with two display sizes, a 12-inch display with
operation panel housed in a single compact case and a
convenient two piece 15-inch unit with separate keyboard for multiple installation locations. Both units have
high-resolution XGA (1024 x 768) grade LCD, which is
extraordinary for the 12-inch LCD display.
Also you can select the Antenna-Scanner Unit from a
wide variety of output powers and lengths to best fit your
application or site circumstances.
MDC-2200 / 2500 series are high performance and multi-function Radars with the essence
of Koden’s latest technology.
In all phases including accuracy, stability, and reliability, the series achieve the highest-grade
in the market.
High-end Radar series forming a class apart!
Display example with Koden Chart Plotter GTD-110 / 150
Dual Station
One antenna can be operated from two displays. This is highly effective for navigation of a double ended vessel with
bridges in the bow and stern.
•
12-inch (The highest resolution of the class)
MDC-2240: 4 kW, 3 feet / 4 feet Open
MDC-2260: 6 kW, 4 feet / 6 feet Open
MDC-2210: 12 kW, 4 feet / 6 feet Open
MDC-2220: 25 kW, 6 feet / 9 feet Open
•
15-inch
MDC-2540: 4 kW, 3 feet / 4 feet Open
MDC-2560: 6 kW, 4 feet / 6 feet Open
MDC-2510: 12 kW, 4 feet / 6 feet Open
MDC-2520: 25 kW, 6 feet / 9 feet Open
Loading...