Page 1
w
(1) (2) (3) (4) (5) (6)
(1) Range Mode
Blank
Auto Range
Auto Shift
(2) Normal/Zoom Normal Zoom
(3) Shift status Same Indiv.
(4) Range status Same Indiv.
(5) Gain setting
H1
H2
L1
L2
*Vaule stands for current setting.
(6) CM status ~
:
Manual
:
Auto Range
:
Auto Shift
:
Hi-Freq. 1
:
Hi-Freq. 2
:
Lo-Freq. 1
:
Lo-Freq. 2
(7) Alarm set status
Arrival Bottom
XTE Fish
(8) Image Speed
Speed1 Stop Speed2 Speed3-9
(9) [EVENT] key assignment
Store Position Store Image Homing
(10) [F1] [F2] key assignment
Shift Digit Input A Scope
IR Image Swap
Color Erase Image Title
Noise Rejection VRM Interval
Background Color Sona-Tone
TVG Adjust NAV Start
White Line Image Recall
(11) SD Card* *(11)(12) are only for
(12) USB Memory* CVS-FX2/FX2BB
Select Range ([▲RANGE▼] key)
(11)
(12)
(9)
(7) (10)
(8)
W. Temp
Speed
Explanation of header icons
Gain adjustment
Adjust
9.0
Turn
To adjust gain, use the following GAIN knob:
1 screen: GAIN-R knob
2 screens:GAIN-R knob for the right screen, GAIN-L knob for the left
3/4 screens:GAIN-R knob for the 2 right screens, GAIN-L knob for 2 left.
Use GAIN-R knob for the middle screen, in case of 3 screens.
Turn
Push
To switch adjust
screen
Disappears in
a given time
100m
Disappears in
a given time.
Setting range is
displayed
Push
*Not valid during Auto Range.
*In case the same range for all screens
Set Shift ([▲SHIFT▼] key)
100
Disappears in
a given time
Setting shift is
displayed
*Not valid during Auto Shift.
Push
*In case the same range for all screens
Turn OFF Shift ([SHIFT/ M OFF key])
Shift setting
turns to zero
Push
Push
Returns to
the preset
value
Select Settings of Saved Function ([F1]/[F2] key)
Function depends on setting by [F1 key setting]
IR
OFF
Lo
Push
High
Long push [F1] or [F2] key
to select function to assign
Push
Push
Push
*Either operation
is possible
[F2 key setting]
can be done
similarly
Store Position / Store Image ([EVENT] key)
Function depends on setting by [EVENT key setting]
*Navigation data (eg. GPS) is
[Store Position]
required.
To save waypoint
Power ON/OFF ([BRILL] key)
Power ON
Push
Keep pressed longer than 3 seconds
Power OFF
Adjust Brightness ([BRILL] key)
LCD Brill
10
Push
Panel Brill
10
*Changes each time [BRILL] key is pushed.
Push
Push
Push
Push
Push
[Store Image]
To save image of echo sounder
Push
Display Menu List ([MENU] key)
Push
Push
Echo Adjust
TVG
Disp. Setup1
Disp. Setup2
Range Setup
Shift Setup
BTM Search
Alarm1
Alarm2
NAV
Image
Manual set
*To open menu list, or sub-menu list
IR
Color
Noise Rejection
TX Power(HF)
TX Power(LF)
Dynamic Range
Background Color
Color Tone
Return
High
0%
0
100
100
24dB
Blue
64 colors
Push
*To close the
menu list
0093101116-01
Page 2
●To operate menu
Push to close
menu list
Push
to open
menu list
Select
menu
name
Select
items
to set
Change
settings
x1: Back to setting items
x2: Back to menu name
Push to close
menu list
●To change contents of CM (Condition Memory) keys
One set of the setting values can be switched by using CM keys.
Some setting items are in common use, such as language selection, types of Transducers , etc.
Swithing by CM1 to CM6 keys makes it possible to use functions as if you were using 6 different echo
sounders.
You can switch the settings simply by pushing buttons, among the preferred values saved for different fish
types, seasons, fishing points.
Push to switch to
the setting values in
each CM button.
CM currently in
use is lit red.
Push the CM button to recall the preferred settings.
●To change zoom range and shift position of par tial zoom
To change the zoom screen range to your preference.
10 m
Setting range is
Push
Zoom icon of
header turns to
enlarge.
Push
displayed.
To change the shift position of partial zoom screen.
10.0
Disappears in a given time.
Disappears in a given time.
Setting shift is
Push
displayed.
●To change contens of CM Menu
Settings for screen configuration, adding z oom scr een and frequency c hange can be done in the CM menu to
your preference.
Move the green
Push
Push to close
CM menu
Frequency
75.0
Push the red-lit
Push
Push
cursor onto the
item to change.
Push
CM button.
Next change can be repeated.
0093101116-01
Loading...