Kodak EASYSHARE P850, EASYSHARE P750 User Manual

KODAK EASYSHARE Digital Frame

FPO

Extended user guide P750/P850

www.kodak.com

For help with your digital frame, www.kodak.com/go/digitalframesupport

Eastman Kodak Company Rochester, New York 14650 © Kodak, 2010

All screen images are simulated.

Kodak, EasyShare, and Perfect Touch are trademarks of Eastman Kodak Company.

P/N 4H7103_en

Frame features

Product features

1 mode button 6 USB high-speed host—connect to USB flash

OK/4-way navigation

3 back button 8 DC-In 5V , behind stand

4 Memory card slot -

SD/SDHC/MMC/MS/MS Pro/XD

5 Power button

* purchase USB cable separately

www.kodak.com/go/support

drive or hard drive

7 USB high-speed device—connect to computer*

(see page 2)

Stand

Data plate with serial number, behind stand— remove stand to access (

Wall mounting holes (2), behind stand—

remove stand to access (

see page 1)

see page 27)

Product features

Pictures Copy/

Delete

Picture

Finder

Transitions Set

Modes

Settings

Press to highlight an icon, then press OK to select it.

Play/

Pause

Press OK to display the main control panel.

Main control panel—icons

Icon Description

Play—start playing a slide show.

Pause—resume a paused slide show (see page 18).

Pictures—find your pictures by: all, date, folders, keywords, people,

favorites (see page 11). The Pictures icon changes to indicate your current picture source: internal memory, memory card, USB flash drive or device.

Copy—copy pictures to the frame, appears when a memory card or USB device is inserted (see page 8).

Delete—delete pictures from the frame, appears when no memory card or USB device is inserted (see page 18).

Picture Finder—play similar pictures, those taken on the same day as the picture on the screen (see page 17).

Transitions—choose a transition style between pictures, and how long each picture is displayed (see page 24).

Set Modes—choose your favorite style for collage, clock, and calendar modes. Then play pictures in these modes by pressing the mode button on the remote control (see page 25).

Settings—change your frame settings (see page 19).

ii www.kodak.com/go/support

Table of contents 1

1 Getting started ......................................................................................1

Attaching/removing the stand .......................................................................1

Attaching the power cable ............................................................................2

Navigating with the remote control ............................................................... 3

Storing the remote control.............................................................................3

Setting your language ...................................................................................4

Setting the time, date, and on/off times.........................................................5

Activity sensors—energy saver......................................................................5

Turning your frame on and off.......................................................................6

Inserting a memory card................................................................................6

Inserting a USB device...................................................................................7

Copying pictures to your frame......................................................................8

2 Viewing pictures ..................................................................................10

Viewing from internal memory.....................................................................10

Viewing from a memory card or USB device.................................................10

Searching for and viewing your pictures.......................................................11

Changing viewing modes ............................................................................16

Picture Finder—auto-play similar pictures....................................................17

Pausing play on a single picture...................................................................18

Deleting pictures from your frame................................................................18

3 Changing settings and more ...............................................................19

Changing frame settings .............................................................................19

Settings ......................................................................................................20

Setting the time, date, and on/off times.......................................................22

Setting transitions between pictures ............................................................24

Setting viewing modes ................................................................................25

Upgrading your firmware (recommended)....................................................26

Changing your frame orientation.................................................................27

www.kodak.com/go/support iii

Table of contents

Hanging your frame on the wall ..................................................................27

Maintaining your frame...............................................................................28

Learning more about your frame..................................................................28

4 Troubleshooting and support ..............................................................29

Picture frame problems ...............................................................................29

Screen messages.........................................................................................30

Re-setting your frame after losing power .....................................................31

5 Appendix .............................................................................................32

Digital frame specifications..........................................................................32

Important safety instructions .......................................................................33

Additional care and maintenance ................................................................34

Replacing the remote control battery...........................................................34

Limited warranty .........................................................................................35

Regulatory compliance and advisory............................................................37

iv www.kodak.com/go/support

1 Getting started

When displayed with the stand extended, the frame rests at a 68° - 76° angle.

Attach

Fit the tabs on the back of the stand into the slots on the frame and slide up to lock.

Remove

Slide the stand down to unlock the tabs and remove.

Welcome to your KODAK EASYSHARE Digital Frame. Viewing and sharing your pictures couldn’t be simpler!

Attaching/removing the stand

NOTE: Your frame may have been shipped with the stand already attached.

To change from landscape to portrait orientation , simply turn the frame on its side, no need to remove the stand.

www.kodak.com/go/support 1

Getting started

CAUTION:

If more than one plug is included, use the plug for your type of power outlet.

Attaching the power cable

Do not use this power cable with other devices, including digital cameras.

The frame automatically turns on when you plug it in for the first time.

2 www.kodak.com/go/support

Getting started

A magnet holds the remote control to the back of the frame for convenient, out-of-the-way storage.

Navigating with the remote control

Press the button to:

Navigate left or view the previous picture

Navigate right or view the next picture

Navigate up or highlight the previous screen item

Navigate down or highlight the next screen item

Select or accept the highlighted screen item

Navigate to the previous screen

Cycle through the available viewing modes

NOTE: The buttons on the remote are also available on the back of the frame and function identically.

Storing the remote control

www.kodak.com/go/support

Getting started

Press to highlight your language, then press OK.

Setting your language

The language screen appears the first time you turn on your frame.

To change the language at a later time:

1 Press OK to pause a slideshow and display the control panel icons.

2 Press to highlight (Settings), then press OK.

3 Press to highlight Language, then press OK.

4 Press to highlight your language, then press OK.

4 www.kodak.com/go/support

Getting started

To set the current date and time:

Press to change values.

Press to move to the next entry. When you’ve entered all the

settings, press OK.

Setting the time, date, and on/off times

The first time you turn on your frame, the Time, Date, and On/Off screens appear automatically after you select your language.

For details on setting the 12- or 24-hour clock, current time, date, on/off times, and energy saving activity sensor, see page 22.

Activity sensors—energy saver

The activity sensors turn the frame off if no light or sound is detected in the room; the sensors turn the frame back on when light or sound is detected (this is the default setting).

NOTE: When you first plug in your frame, the activity sensors take about 24 hours to adjust to the typical

light and sound levels in your home environment. During the first 24 hours, your frame may turn on and off at unexpected times.

If you prefer, you can turn off the sensors—then turn the frame on and off manually or set daily automatic on/off times. For details, see page 23.

www.kodak.com/go/support

Getting started

Power button—to turn the frame on or off, press and hold (for about 2 seconds), then release

MMC (MULTIMEDIA Card)

To insert a card, push it firmly into the slot. To remove a card, pull it out of the slot.

SD/SDHC (SECURE DIGITAL/SECURE

DIGITAL High Capacity)

MS Pro (MEMORY STICK)

MS (MEMORY STICK)

Turning your frame on and off

The frame automatically turns on when it is plugged in for the first time.

Inserting a memory card

6 www.kodak.com/go/support

Inserting a USB device

Supported USB devices include a flash drive, card reader, hard drive*, etc.

USB devices are sold separately. *External hard drives must be self-powered.

Getting started

www.kodak.com/go/support

Getting started

CAUTION:

Copying pictures to your frame

Copying pictures to your frame’s internal memory has never been easier. Each time you insert a memory card or USB device, press OK and follow the copy directions.

Do not remove a card or disconnect a device while copying. Your card, pictures, or device could be damaged.

1 Insert a memory card or USB device (flash drive,

card reader, hard drive).

The pictures start playing. A copy message appears, "To copy pictures from <inserted source> to the frame’s internal memory, press OK."

2 Press OK.

3 Highlight your copy method:

This picture—copy the displayed picture.

folder

All pictures in

folder

folder ( are any folders on the inserted card or device).

All pictures in

the card or USB device ( of card or device that’s inserted in the frame).

4 Press OK.

The slide show plays while pictures are being copied.

NOTE: Copies are automatically resized to a lower resolution (smaller size). Full resolution is unnecessary

for viewing and quickly fills up the frame’s memory. Copying from internal memory to a memory card or USB device is not supported. To copy pictures anytime a slide show is playing, with a card or USB device inserted, press OK ,

highlight (Copy), and continue with step 3 above.

represents the folder name, if there

—copy all the pictures in a

source

—copy all of the pictures on

source

represents the type

8 www.kodak.com/go/support

Getting started

Purchase USB cable separately

Copying pictures directly from a computer

Pictures copied from your computer are not resized to a lower resolution on the frame. To save space on your frame, first resize your pictures on your computer (800 x 600 resolution is best).

1 Connect your frame to the computer with a USB cable (Series mini-B, purchase

separately). Your frame appears as a removable USB device on the computer.

2 Using your computer operating system, copy or drag pictures to the frame.

NOTE: Your frame does not support copying from the frame to a computer.

Copying pictures from a computer, using memory card

The easiest way to copy a large number of pictures from your computer to your frame’s internal memory:

1 Insert an empty memory card or USB device into your computer.

2 Copy some or all of the pictures from your computer onto the card or USB device.

3 Remove the card or USB device from your computer, and insert it into the frame.

4 Follow the copy directions on page 8 (highlight All pictures, then press OK).

Copying pictures from a digital camera

1 Remove the memory card (containing pictures) from your camera, and insert it into

the frame.

2 Follow the copy directions on page 8.

www.kodak.com/go/support

+ 34 hidden pages