Kodak P520 - GUIA COMPLETO DO USUÁ, RIO, P820 - GUIA COMPLETO DO USUÁ, EasyShare P720, EasyShare P520 Extended User Manual

Kodak EasyShare

digital photo frame

Extended user guide
P520/P720/P820

www.kodak.com

For help with your frame, www.kodak.com/go/digitalframesupport

Eastman Kodak Company
Rochester, New York 14650
© Eastman Kodak Company, 2008

All screen images are simulated.

Kodak and EasyShare are trademarks of Eastman Kodak Company.

P/N 4F8178_en

Front View

2

1

3

1 LCD screen
2 Quick Touch Border (right side, tap only)
3 Quick Touch Border (bottom, tap/slide)

To use the Quick Touch Borders,
see page 3.

Kodak EasyShare P520 digital frame

Kodak EasyShare P720/P820 digital frames

2

1

3

Product features

www.kodak.com/go/support

i

Back/Side View

4

5

7

8

3

1

2

P820 digital frame

6

4

5

7

8

3

1

2

6

P520/P720 digital frames

9

9

1 On/Off button 5 Reset button

2 Stand attachment slot 6 Wall mounting holes, 3 (see page 7)

3 Frame stand (see page 1) 7 USB connector (to camera/USB device)

4 Memory card slot - SD, MS, xD, MMC 8 Memory card slot - SD/SDHC

9 Power connector

ii www.kodak.com/go/support

Table of contents 1

1 Getting started ......................................................................................1

Setting up your frame....................................................................................1

Turning your frame on and off.......................................................................2

Using your frame’s Quick Touch Borders ........................................................ 3

Setting your language ...................................................................................4

Enjoying your pictures immediately! ..............................................................4

Inserting a memory card................................................................................5

Connecting a digital camera or other USB device ...........................................6

Changing your frame orientation...................................................................7

Mounting your frame on the wall ..................................................................7

2 Viewing pictures ....................................................................................8

Accessing your pictures .................................................................................8

Running a slide show....................................................................................9

Viewing thumbnails ......................................................................................9

Viewing a single picture ..............................................................................10

Viewing pictures by date or filename ...........................................................10

Copying pictures .........................................................................................11

Deleting pictures.........................................................................................11

Selecting multiple pictures...........................................................................12

Copying from your computer .......................................................................13

3 Doing more .........................................................................................16

P520—Changing frame and slide show settings.......................................... 16

P720/P820—Changing frame and slide show settings.................................18

Setting the clock and timer..........................................................................21

Upgrading your firmware.............................................................................22

Installing the software.................................................................................23

Customizing your frame ..............................................................................24

Maintaining your frame, faceplates, and mattes...........................................24

www.kodak.com/go/support iii

Table of contents

Learning more about your frame..................................................................25

4 Troubleshooting and support ..............................................................26

Picture frame problems ............................................................................... 26

Screen messages.........................................................................................28

5 Appendix .............................................................................................30

Digital frame specifications..........................................................................30

Important safety instructions .......................................................................31

Upgrading your software and firmware........................................................31

Additional care and maintenance ................................................................31

Limited warranty .........................................................................................32

FCC compliance and advisory ...................................................................... 34

iv www.kodak.com/go/support

1 Getting started

Make sure the tab is
secure in the slot.

Tab

Slot

Welcome to your Kodak EasyShare digital frame. Viewing your pictures couldn’t be
simpler!

Setting up your frame

Attaching the frame stand

Your frame displays pictures in landscape orientation. To change to portrait
orientation, see page 7.

www.kodak.com/go/support 1

Getting started

CAUTION:

1

2

Your power cable may look
different from the one pictured.
Use the plug that accommodates
your type of power outlet.

Attaching the power cable

Do not use this power cable with other devices, including digital
cameras.

Turning your frame on and off

2 www.kodak.com/go/support

■ Turn on. Turn off (put in standby

mode).—Press and hold the power button (for
about 2 seconds), then release.

■ Power off—Unplug the power cable.

Using your frame’s Quick Touch Borders

Tap next to or

below a button to
select it.

Tap a border to
display the icons.

Tap (Close) to
dismiss them.

Touch tips

Home

Close

*Quick Touch

OK
Done

Tap and slide on the Quick

Touch Borders* only.

Slide to highlight
menus, pictures,
videos, options.**
Tap OK to select
them.

Slide to scroll:

Scroll through images—Like turning the pages of a book, slide left ← to go forward, slide right → to go
back. For faster scrolling through larger numbers of pictures, touch and hold (3 seconds), then slide to
the end of the border.

Scroll through menus—Slide right → to scroll down, slide left ← to scroll up.

Borders

Tap below small arrows at the ends of the scroll bar to move the highlight one picture,

menu, or item at a time.

Tap next to buttons,
cannot slide here

IMPORTANT:

The screen is not touch-sensitive. Do not touch it.
Only use your finger to touch the borders.
Sharp or metal objects may damage the border or screen.

Don’t hover,

borders can be
sensitive;
unexpected
selections may
result.

Tap below buttons
Slide on bottom

border only

Play Slide show

**

Getting started

www.kodak.com/go/support

3

Getting started

1

2

Setting your language

The language screen appears the first time you turn on your frame.

■ Slide or tap below slider arrows to find your

language, then tap OK.

To change the language at a later time:

■ Tap (Home) → (Settings) → Language.

The language screen appears.

Slide to find your language, then tap Save.

Enjoying your pictures immediately!

NOTE: If the software installation screen appears, dismiss it and start playing a slide show immediately. To

install the software later, see page 23.

■ To view your pictures or play a slide show,

insert a memory card, or connect a camera or other
USB device (see page 6).

If you are at the Home screen, see page 8 to start
your slide show.

NOTE: There may be preloaded Kodak images on your frame. They will play when there is no other picture

source connected.

4 www.kodak.com/go/support

Inserting a memory card

MultiMedia Card

SD/SDHC

Memory Stick

xD

SD/SDHC

P520/P720 digital frame

P820 digital frame

Getting started

■ To insert a card in:

– top card slot, push the card firmly into the slot until it clicks into place.

– side card slot, push the card firmly into the slot until it stops.

■ To remove a card from:

– top card slot, push in the card to release it.

– side card slot, pull out the card.

IMPORTANT:

Do not insert a micro or mini memory card without an adapter.

www.kodak.com/go/support

5

Getting started

USB cable included
with your USB device

USB devices: camera, flash drive, card reader, etc. (sold separately)

P520/P720 digital frame

P820 digital frame

Connecting a digital camera or other USB device

6 www.kodak.com/go/support

Getting started

To change to portrait , turn
your frame 90° and use the
wall mounting holes at the top.

Wall mounting holes
(on back of frame)

Secure power cable
with attached clip

Changing your frame orientation

Your frame is set up to display pictures in landscape orientation. You can turn the
stand to change it to portrait but you must also change the setting.

Change the stand position:

■ R

emove the stand, turn it 90 °, and replace as shown

page 1).

Change the setting:

(see

1 Tap (Home)

→ (Settings).

2 Slide to highlight (Viewing options), then tap OK.

3 Slide to highlight Frame orientation, then tap OK.

4 Slide to highlight Portrait, then tap OK.

5 Tap to exit.

Mounting your frame on the wall

Use 3 mm (1/8 inch), or larger, wall-anchoring hardware (not included) to anchor your
frame securely to your wall.

www.kodak.com/go/support

7

2 Viewing pictures

Accessing your pictures

Tap Home to access pictures from your memory card and all connected devices (see

page 6). Use the touch borders to make your selections

1 Tap (Home).

All connected sources and the Settings icon are
displayed.

2 Slide to highlight a picture source, then:

■ Tap (Slide show) to start a slide show.

OR

■ Tap OK to view thumbnails.

Picture sources and settings icons:

Memory card—appears when you insert a card (page 5). The label and icon
indicate the type of card.

Camera—appears when you connect a digital camera via USB cable (page 6).

(

see page 3).

USB drive—appears when you insert a USB flash drive (page 6).

Settings—customize your frame settings. For example; set slide show durations
and transitions, set viewing options, screen brightness, clock, and timer. For P520
frame settings, see page 16. For P720 and P820 frame settings, see page 18.

8 www.kodak.com/go/support

Viewing pictures

Running a slide show

There are three ways to start a slide show on your frame:

■ Insert a memory card or USB device, then turn on your frame.

■ Turn on the frame, then insert a card or connect a USB device—a new slide show

starts automatically, replacing a currently running slide show or single view
picture.

■ Select a picture in thumbnails view or select a picture source on the Home screen,

then tap (Slide show).

■ Select just your favorite pictures from a picture source (see Selecting multiple

pictures, page 12), then tap (Slide show).

Other slide show information

– A slide show plays continuously until you stop it or turn off the frame.

– You can change the slide show duration and transition style (see page 16).

Viewing thumbnails

There are two ways to view your pictures as thumbnails:

■ Tap (Home) then select a picture source (see

page 8). Tap OK.

Or,

■ From a slide show (tap a quick touch border to

display the icons), or from single view, tap
(Thumbnails).

To navigate through the thumbnails, slide your finger left/right along the slider at the
bottom. To move even faster through the thumbnails, touch and hold until the screen
changes (about 3 seconds).

To play a folder of thumbnail images, highlight the folder then tap (Slide show).

www.kodak.com/go/support

9

Viewing pictures

Viewing a single picture

■ To view a single, full-screen picture, highlight it in thumbnails view, then tap OK.

■ To turn off the buttons and other screen text, tap (Close).

■ To magnify a picture up to 8X, tap (Actions), tap (Zoom), then tap

the plus (+) button. To view other parts of the picture, tap the arrows. To return to

1X size, tap the minus (-) button.

NOTE: Depending on picture size, full magnification may be less than 8X.

■ To rotate a picture, tap (Actions), then tap (Rotate).

Viewing pictures by date or filename

By default, the pictures on your frame are arranged and played by date, starting with
the oldest. You can change the arrangement, or sort order, by date or alphabetically
by filename.

NOTE: If a picture source with numerous images (greater than 500) takes too long to load, change the

order to play by filename.

To change the sort order:

1 For P720 or P820 frames—display thumbnails (see page 9), then tap (Slide

show options).

For P520 frame—tap (Home) then (Settings).

2 Highlight Sort, then tap Select.

3 Select a sort order:

-Filename, A - Z

-Filename, Z - A

-Date, oldest to newest (default)

10 www.kodak.com/go/support

Viewing pictures

CAUTION:

CAUTION:

Connected devices

-Date, newest to oldest

4 Tap Save.

Copying pictures

Copy pictures from your current viewing location to another connected device. For
example, insert a USB flash drive (see page 6) and insert a card (see page 5) in your
frame, then copy pictures from the flash drive to the card.

To copy pictures from your computer, see page 13.

Removing a card or disconnecting a device while copying may
damage your card, pictures, or device.

Deleting pictures

1 Highlight a picture to copy:

In thumbnails view, slide, or tap below the slider
arrows, to find a picture; or, display a picture in
single view (see page 10).

To select multiple pictures, see page 12.

2 Tap (Actions).

3 Tap (Copy).

4 Tap the device you want to copy to, then tap OK.

The picture is copied.

5 Tap (Close) to close the menu.

Removing a card or disconnecting a device while deleting may

www.kodak.com/go/support

11

Viewing pictures

Tap Delete

damage your card, pictures, or device.

1 Highlight a picture to delete:

In thumbnails view, slide or tap below the slider
arrows to find a picture; or, display a picture in
single view (see page 10).

To select multiple pictures, see page 12.

2 Tap (Actions).

3 Tap (Delete), then tap Yes to confirm.

The picture is deleted.

4 Tap (Close) to close the menu.

Selecting multiple pictures

Use the multi-select feature to copy or delete two or more pictures or to play a slide
show of selected pictures.

1 In multi-up (thumbnails) view, slide your finger

along the bottom touch border to find a picture,
then tap (Select).

A check mark appears on the selected picture.

2 Continue selecting pictures.

To remove a check mark, highlight a picture then tap Unselect.
Tip: To remove all check marks at once, tap Select All, then tap Unselect All.

Select/Unselect all

■ In thumbnails view (page 9), tap (Select All).

■ To remove all check marks, tap Unselect All.

12 www.kodak.com/go/support

Viewing pictures

USB device
Memory card

Pictures on your
computer

Drag and drop here
(Drag and Drop Zone)

Select pictures here
(Viewer pane)

My Devices:

Pictures and Videos:

Click Help for
more info

Copying from your computer

Use Kodak EasyShare digital display software to drag and drop pictures easily from
your computer to a removable device (memory card or other USB device, like a flash
drive or camera). Then insert the device into your frame and play a slide show right
away.

1 Install the software that came with your frame (see page 23).

2 Insert a removable device into your computer or connected card reader.

3 Double-click (Kodak EasyShare digital display icon) on your desktop to open

the software.

The memory card and connected devices appear in the Drag and Drop Zone.

4 Click My Devices to see the connected devices and their folders.

5 In Pictures and Videos, click the folder or location on your computer that contains

the pictures you want to copy.

www.kodak.com/go/support

13

Viewing pictures

My Collection

Drag and drop here (Picture tray)

Select pictures here
(Viewer pane)

6 In the Viewer pane, select the pictures you want to copy, then drag and drop them

to the copy location (memory card or USB device) in the Drag and Drop Zone.

The pictures are copied to the memory card or USB device.

7 Remove the card or USB device from your computer. Insert the card into your

frame’s card slot (see page 5), or connect the USB device (see page 6).

A slide show begins.

NOTE: To maintain the slide show order during playback, see page 10 and select Filename, A to Z.

For more information on the features included in the Kodak EasyShare digital display
software, click the Help button.

Copying pictures from EasyShare software

It’s easy to copy pictures from My Collection to a memory card, then play them in a
slide show on your frame.

1 Install the software that came with your frame (see page 23).

2 Insert a memory card into your computer. Or insert a removable USB device or card

3 Double-click (Kodak EasyShare software icon) to open the software.

reader into the computer’s USB port.

14 www.kodak.com/go/support

Viewing pictures

4 Click My Collection, then select the pictures in the Viewer pane. Drag and drop

them into the Picture tray.

5 In the menu bar, select File

→ Copy to.

6 Browse to the location to which you are copying.

The memory card, card reader, and USB device appear as removable drives.

7 Select

Best For Picture Frame

to resize the pictures you are copying. Full resolution is

unnecessary and quickly fills up the frame’s memory.

8 Click Copy. Pictures are copied to the copy destination (memory card or USB

device).

9 Remove the card or USB device from your computer. Insert the card into your

frame’s card slot (see page 5), or connect the USB device (see page 6).

A slide show begins.

For more information on the features included in the Kodak EasyShare software, click
the Help button.

www.kodak.com/go/support

15

3 Doing more

P520—Changing frame and slide show settings

For P520 frames, use the Settings menu to customize your frame and your slide show
options.

1 Tap (Home), then (Settings).

2 Slide, or tap below the slider arrows, to highlight a setting, then tap OK.

3 Follow the on-screen instructions. Tap OK to accept your selections.

4 Tap (Back) to exit.

Settings menus

Setting Options

Upgrade firmware

This option is only displayed if
the upgrade file (.img) is
available on the frame
(memory card, flash drive,
etc.).

Upgrade firmware—load the latest version of firmware on
your frame (page 22).

Exit—return to the Home screen.

16 www.kodak.com/go/support

Doing more

Setting Options

Set up viewing options Sort—change the arrangement, or sort order, of your pictures

in a slide show by date or alphabetically by filename
(page 10).

Slide duration—specify how long each picture is displayed
in a slide show, from 3 seconds to 1 hour. (The default is 5
seconds.)

Transitions—specify the transition style between pictures in
a slide show. See screen for options. The default is Random.

Frame orientation—Display your frame in landscape
(default) or portrait orientation.

Screen Fit or Fill—Fit entire image (default). Show
the entire picture. Black borders may appear around the
image. Fill the screen .The picture fills the entire screen;
some of the picture may be cut off (cropped).

Brightness—Slide to adjust the screen brightness according
to your lighting conditions.

Clock and timer On/Off schedule—set your frame to turn on and off at a

specified time every day (page 21).
Set time—manually set the clock to the current time

(page 21).

Language Choose your language (page 4).

About Check your frame model, serial number, and firmware version.

www.kodak.com/go/support

17

Doing more

P720/P820—Changing frame and slide show
settings

For P720 and P820 frames, use the Settings menu to customize your frame. Use Slide
Show Options to customize how you view your slide shows.

Settings menus

1 Tap (Home), then (Settings).

2 Slide or tap below the slider arrows to highlight a setting, then tap OK.

3 Follow the on-screen instructions. Tap Save to accept your selections.

4 Tap (Back) to exit.

Setting Options

Upgrade firmware

This option is only displayed if
the upgrade file (.img) is
available on the frame
(memory card, flash drive,
etc.).

Upgrade firmware—load the latest version of firmware on
your frame (page 22).

Exit—return to the Home screen.

18 www.kodak.com/go/support

Doing more

Setting Options

Set up viewing options Slide duration—specify how long each picture is displayed

in a slide show, from 3 seconds to 1 hour. (The default is 5
seconds.)

Transitions—specify the transition style between pictures in
a slide show. See screen for options. The default is Random.

Shuffle—play the images in random order. Turn On or Off
(default).

Brightness—Slide to adjust the screen brightness according
to your lighting conditions.

Frame orientation—Display your frame in landscape
(default) or portrait orientation.

Screen Fit or Fill—Fit entire image (default) Show
the entire picture. Black borders may appear around the
image. Fill the screen The picture fills the entire screen;
some of the picture may be cut off (cropped).

Slide show starting point—When pictures are sorted
from oldest to newest, start your slide shows from: One week
back Only see your newest pictures. Oldest pictures
(default) Enjoy all the pictures in your current picture source.

Clock and timer On/Off schedule—set your frame to turn on and off at a

specified time every day (page 21).
Set time—manually set the clock to the current time

(page 21).

Language Choose your language (page 4).

About Check your frame model, serial number, and firmware version.

www.kodak.com/go/support

19

Doing more

Slide Show Options

1 From thumbnails view or a full screen single view, tap (Slide show options).

2 Slide, or tap below the slider arrows, to highlight a setting, then tap OK.

3 Follow the on-screen instructions. Tap OK to accept your selections.

4 Tap (Back) to exit.

Setting Options

Sort Change the arrangement, or sort order, of your pictures in a

slide show by date or alphabetically by filename (page 10).

Slide duration Specify how long each picture is displayed in a slide show,

from 3 seconds to 1 hour. (The default is 5 seconds.)

Transitions Specify the transition style between pictures in a slide show.

See screen for options. The default is Random.

Shuffle Plays the images in random order. Turn On or Off.

Slide show starting point When pictures are sorted from oldest to newest, start your

slide shows from:

One week back—only see your newest pictures (default).
Oldest picture—enjoy all the pictures in your current picture

source.

Screen Fit or Fill Fit entire image— (default). Show the entire picture.

Black borders may appear around the image.
Fill the screen— .The picture fills the entire screen;

some of the picture may be cut off (cropped).

20 www.kodak.com/go/support

Doing more

Setting the clock and timer

Manually setting the clock

1 Tap (Home), then (Settings).

2 Highlight Clock and timer, then tap OK.

3 Highlight Set time, then tap OK.

4 Slide to set the hour. Tap the right arrow to highlight the next setting (minutes),

then slide to adjust it.

5 Tap OK or Save to accept your changes.

Setting automatic on/off

Set your frame to turn on and off at a specified time every day.
NOTE: Set the clock before enabling auto on/off.

1 Tap (Home), then (Settings).

2 Highlight Clock and timer, then tap OK.

3 Highlight On/Off schedule, then tap OK.

The current time is displayed and the hour field is highlighted.

4 Set the Turn on time. Slide to adjust the hour. Tap the right arrow to highlight the

next setting (minutes), then slide to adjust it. Repeat to set Turn off time.

NOTE: Make sure the on time is earlier than the off time.

5 Tap Enable, then OK or Save when you’re done.

Your frame will now automatically turn on and off at the times you specified.

If your frame loses power, the clock time returns to the factory setting and the
automatic on/off times, if set, are disabled. To reset the clock and re-enable your
on/off times, see Resetting the clock after losing power, page 27.

www.kodak.com/go/support

21

Doing more

Upgrading your firmware

Firmware is the software that runs on your frame. To check for the latest version, visit

www.kodak.com/go/digitalframedownloads.

Download the firmware to your computer, then upgrade your frame:

1 On your computer, go to www.kodak.com/go/digitalframedownloads.

2 Follow the screen directions to download the frame firmware to your computer.

3 Copy the IMG file to the root directory of a memory card or USB flash drive, then

insert into the frame.

The frame recognizes the upgrade file on the inserted device and makes the Firmware
Upgrade option available in the Settings menus.

4 Tap (Home), then (Settings).

5 Highlight Firmware Upgrade, then tap OK to begin the upgrade.

IMPORTANT:

Do not turn off the frame or remove the memory card or USB flash drive
during the upgrade!

When the upgrade is complete, your frame automatically restarts. If it doesn’t, press the
power button to turn the frame off, wait a few seconds, then press it again to turn the
frame back on.

22 www.kodak.com/go/support

Doing more

CD packaged
with your frame

Installing the software

Follow these directions to install the software that was packaged with your frame. The
CD contains two applications that work well independently, but also work together
for the best experience with your frame:

■ Kodak EasyShare digital display software —

manage your frame, organize your pictures and
videos, and copy between your frame and computer
(see page 13).

■ Kodak EasyShare software —organize, edit,

and share your pictures.

Install the software

1 Close all software applications that are open on your computer (including

anti-virus software; see the anti-virus software manual for details).

2 Place the EasyShare software CD into the CD-ROM drive.

3 If the Install Wizard does not appear, choose Run from the Start menu and type

d:\setup.exe where d is the drive letter that contains the CD.

4 Follow the on-screen instructions to install the software.

■ Select Typical to install EasyShare digital display software and to update a

previous version of EasyShare software.

■ If you do not have a previous version of EasyShare software on your computer,

you can click Custom and choose both applications for a new installation.

NOTE: When prompted, take a few minutes to electronically register your picture frame and software. To

register later, visit

www.kodak.com/go/register

.

5 If prompted, restart the computer. If you turned off anti-virus software, turn it back

on.

The software icon(s) appear on your desktop when the installation is complete.

www.kodak.com/go/support

23

Doing more

When you are not using the matte,
reapply it to the liner and store in a
plastic bag to keep the adhesive
backing clean.

Faceplate

Matte

Frame

Use a medium Phillips head
screwdriver to tighten the clips
on the back of the faceplate, if
necessary.

Customizing your frame

Customize your frame with decorative mattes and/or faceplates (included with some
frame models). Additional faceplates are available for purchase.

Maintaining your frame, faceplates, and mattes

IMPORTANT:

Gently wipe the frame, LCD, faceplate, or matte with a clean, dry, lint-free cloth
(included). For fingerprints on the frame, apply light pressure.

24 www.kodak.com/go/support

Always disconnect the power before cleaning. Do not use water, cleaning
solutions, or other adhesives on the frame or any of its parts.

Doing more

Learning more about your frame

www.kodak.com/go/digitalframes Frame accessories, including decorative faceplates

and custom mattes

www.kodak.com/go/digitalframesupport Interactive troubleshooting and repairs

Interactive tutorials
FAQs
Downloads
Product registration

www.kodak.com/go/support

25

4 Troubleshooting and support

For step-by-step product support, visit www.kodak.com/go/digitalframesupport and
select Interactive Troubleshooting & Repairs.

Picture frame problems

If... Try one or more of the following

Frame does not
turn on.

Nothing happens when
a memory card, camera,
or USB device is
connected.

Touch border doesn’t
work.

■ Make sure the power cable that was included with your frame is

connected securely (see page 2).

■ Unplug the power cable from the frame. Wait 5 seconds, then

reconnect the cable.

■ Press and hold the power button (for about 2 seconds), then

release.

■ Insert a certified SD/MMC/MS/xD card with images into the

designated card slot, then push to seat it (see page 5). In the top
card slot, make sure the card is seated flush with the top.

■ Make sure the USB cable that was included with your camera or USB

device is connected securely (see page 6).

■ Make sure the file format of your pictures is supported (see

page 30).

NOTE: A large picture file may take time to appear.

■ Use your finger to make your selections on the touch-sensitive

borders (see page 3).

IMPORTANT:

Do not slide on the right border (tap only).

■ Unplug the power cable from the frame. Wait 5 seconds, then

26 www.kodak.com/go/support

reconnect the cable. Press and hold the power button (for about 2
seconds), then release.

Troubleshooting and support

If... Try one or more of the following

Frame freezes up.

You set automatic
on/off but the frame
doesn’t turn on and off
at the specified times.

■ Unplug the power cable from the frame. Wait 5 seconds, then

reconnect the cable. Press and hold the power button (for about 2
seconds), then release.

■ Use a paper clip or other slim object to press the recessed reset

button on the back of the frame (see page ii).

■ Make sure you Enabled the on/off setting after you set the times,

then press OK (not Back). See page 21.

■ If your frame loses power, the clock returns to the factory setting

and auto on/off times are disabled. See Resetting the clock after

losing power, page 27.

Resetting the clock after losing power

If you turn off the power on the frame or otherwise lose power, the clock time returns
to the factory setting and the automatic on/off times, if set, are disabled.

■ When you turn the frame back on, the set time screen appears on the frame.

■ Slide to set the hour. Tap the left/right arrows to highlight the previous or next

setting (hour, minutes), then slide to adjust the setting.

■ Tap Save or OK.

The Home screen appears. The time is reset and the automatic on/off times (if set) are
re-enabled. It is not necessary to reset the on/off times.

NOTE: If you exit the set time screen without setting the time, you can manually reset the clock and

re-enable the automatic on/off times (see page 21). It is not necessary to reset the on/off times.

www.kodak.com/go/support

27

Troubleshooting and support

Screen messages

Screen message Try one or more of the following

Create file failed. The device (memory card, USB drive, camera, etc.) you are

trying to copy to is protected.

■ See your device documentation to remove write

protection.

■ Insert or connect a different device.

Write failed. Select another
location.

Unable to create file. Device write
protected or full.

Disk full.

The frame was unable to copy the picture.

■ Insert a different card or device (page 6).

The frame was unable to copy the picture.

■ Insert a different card or device (page 6).

■ Remove write protection, unlock card.

■ Delete pictures from card.

28 www.kodak.com/go/support

Troubleshooting and support

Screen message Try one or more of the following

Error attempting to open file or
directory.

Error duplicate filename.

Error occurred while closing a file.

Error invalid filename

Error reading from file.

Error writing from file.

Error writing a file.

Error writing to a file.

File Copy Failed!

Internal error.

Parameter is invalid.

Unknown error.

■ Unplug the power cable from the frame. Wait 5

seconds, then reconnect the cable. Press and hold the
power button (for about 2 seconds), then release. If the
problem persists, contact customer support help, at

www.kodak.com/go/digitalframesupport.

www.kodak.com/go/support

29

5 Appendix

Digital frame specifications

For more specifications, visit www.kodak.com/go/digitalframesupport.

Kodak EasyShare P520, P720, P820 digital frames

Color display P520 12.7 cm (5 in.) diagonal analog LCD, 320 x 234 pixels, 4:3 aspect

ratio, 103 x 75 mm (4.0 x 2.9 in.) viewable area

P720 17.8 cm (7 in.) diagonal analog LCD, 480 x 234 pixels, 16:9 aspect

ratio, 154 x 87 mm (6.1 x 3.4 in.) viewable area

P820 20.3 cm (8 in.) diagonal digital LCD, 800 x 480 pixels, 16:9 aspect

ratio, 1

Internal memory None

Power,
5V AC

adapter

Picture formats JPEG, EXIF 2.2

Video/Music formats Not supported

Memory cards MMC (MultiMedia Card); SD/SDHC (Secure Digital/Secure Digital

Temperature Operating

Size P520 17.4 x 14.4 x 3.2 cm (6.9 x 5.7 x 1.3 in.)

US Input: 110-120V AC, 60Hz, 0.5 Amp max.

Output: 5V DC, 1.5 A with EIAJ class 2 DC connector

WW Input: 100-240V AC, 50/60 Hz, 0.5 Amp max.

Output: 5V DC, 1.5 A with EIAJ class 2 DC connector

High Capacity); Memory Stick, xD

-4 to 140

Storage

-22 to 185

77 x 99 mm (7.0 x 3.9 in.) viewable area

°F (-20 to 60°C)

°F (-30 to 85°C)

P720 22.6 x 15.8 x 3.2 cm (8.9 x 6.2 x 1.3 in.)

P820 25.8 x 18.1 x 3.3 cm (10.2 x 7.1x 1.3 in.)

30 www.kodak.com/go/support

Appendix

CAUTION:

Important safety instructions

Do not disassemble this product; there are no user-serviceable
parts inside. Refer servicing to qualified service personnel. Do not
expose this product to liquid, moisture, or extreme temperatures.
The use of controls, adjustments, or procedures other than those
specified herein may result in exposure to shock and/or electrical
or mechanical hazards. If the LCD breaks, do not touch the glass
or liquid. Contact Kodak customer support.

■ The use of an accessory that is not recommended by Kodak may cause fire, electric

shock, or injury. For approved accessories, visit www.kodak/go/accessories.

■ Use only a USB-certified computer equipped with a current-limiting motherboard.

Contact your computer manufacturer if you have questions.

Upgrading your software and firmware

Upgrade to the latest versions of the software included on the Kodak EasyShare
software CD and the frame firmware—www.kodak.com/go/digitalframedownloads.
See page 22 for upgrading firmware.

Additional care and maintenance

■ Wipe the frame, LCD, faceplate, and matte gently with a soft, lint-free cloth

(included). Do not use cleaning solutions unless designed specifically for LCD
screens. Do not allow chemicals, such as suntan lotion, to contact painted
surfaces.

■ Service agreements are available in some countries. Contact a dealer of Kodak

products for more information.

■ For digital frame disposal or recycling information, contact your local authorities. In

the US, visit the Electronics Industry Alliance Web site at www.eiae.org or visit

www.kodak.com/go/digitalframesupport.

www.kodak.com/go/support

31

Appendix

Limited warranty

Kodak warrants Kodak consumer electronic products and accessories (“Products”),
excluding batteries, to be free from malfunctions and defects in both materials and
workmanship for one year from the date of purchase. Retain the original dated sales
receipt. Proof of the date of purchase will be required with any request for warranty
repair.

Limited warranty coverage

Warranty service is only available from within the country where the Products were
originally purchased. You may be required to ship Products, at your expense, to the
authorized service facility for the country where the Products were purchased. Kodak
will repair or replace Products if they fail to function properly during the warranty
period, subject to any conditions and/or limitations stated herein. Warranty service
will include all labor as well as any necessary adjustments and/or replacement parts. If
Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the
purchase price paid for the Product provided the Product has been returned to Kodak
along with proof of the purchase price paid. Repair, replacement, or refund of the
purchase price are the sole remedies under the warranty. If replacement parts are
used in making repairs, those parts may be remanufactured, or may contain
remanufactured materials. If it is necessary to replace the entire Product, it may be
replaced with a remanufactured Product. Remanufactured Products, parts and
materials are warranted for the remaining warranty term of the original Product, or 90
days after the date of repair or replacement, whichever is longer.

Limitations

This warranty does not cover circumstances beyond Kodak's control. This warranty
does not apply when failure is due to shipping damage, accident, alteration,
modification, unauthorized service, misuse, abuse, use with incompatible accessories
or attachments, failure to follow Kodak 's operation, maintenance or repacking
instructions, failure to use items supplied by Kodak (such as adapters and cables), or
claims made after the duration of this warranty. Kodak makes no other express or
implied warranty for this product, and disclaims the implied warranties of

32 www.kodak.com/go/support

Appendix

merchantability and fitness for a particular purpose. In the event that the exclusion of
any implied warranty is ineffective under the law, the duration of the implied warranty
will be one year from the purchase date or such longer period as required by law. The
option of repair, replacement, or refund is Kodak's only obligation. Kodak will not be
responsible for any special, consequential or incidental damages resulting from the
sale, purchase, or use of this product regardless of the cause. Liability for any special,
consequential or incidental damages (including but not limited to loss of revenue or
profit, downtime costs, loss of the use of the equipment, cost of substitute
equipment, facilities or services, or claims of your customers for such damages
resulting from the purchase use or failure of the Product), regardless of cause or for
breach of any written or implied warranty is expressly disclaimed.

Your rights

Some states or jurisdictions do not allow exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you.
Some states or jurisdictions do not allow limitations on how long an implied warranty
lasts, so the above limitation may not apply to you. This warranty gives you specific
rights, and you may have other rights which vary from state to state or by jurisdiction.

Outside the United States and Canada

In countries other than the United States and Canada, the terms and conditions of
this warranty may be different. Unless a specific Kodak warranty is communicated to
the purchaser in writing by a Kodak company, no warranty or liability exists beyond
any minimum requirements imposed by law, even though defect, damage, or loss may
be by negligence or other act.

www.kodak.com/go/support

33

Appendix

Kodak EasyShare P520/P720/P820 digital frame

FCC compliance and advisory

This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not
installed or used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures: 1) reorient
or relocate the receiving antenna; 2) increase the separation between the equipment
and the receiver; 3) connect the equipment to an outlet on a circuit different from that
to which the receiver is connected; 4) consult the dealer or an experienced radio/TV
technician for additional suggestions.

Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. Where shielded
interface cables have been provided with the product or specified additional
components or accessories elsewhere defined to be used with the installation of the
product, they must be used in order to ensure compliance with FCC regulation.

FCC and Industry Canada

This device complies with Industry Canada RSS-210 and FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

34 www.kodak.com/go/support

Appendix

N137

Eastman Kodak Company
Rochester, New York 14650

CE

Hereby, Eastman Kodak Company declares that this Kodak product is in compliance
with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Canadian DOC statement

DOC Class B Compliance—This Class B digital apparatus complies with Canadian

ICES-003.

Observation des normes-Classe B—Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.

Waste Electrical and Electronic Equipment labeling

EU: It is the final user’s responsibility to discard this equipment into an
approved, segregated collection scheme to enable its suitable
treatment/disposal and to improve human/environmental protection. For
more information, see your retailer, local authority, or

www.kodak.com/go/recycle.

Australian C-Tick

Russian GOST-R

www.kodak.com/go/support

35

Appendix

China RoHS

Licensing

Supply of this product does not convey a license nor imply any right to distribute
content created with this product in revenue-generating broadcast systems
(terrestrial, satellite, cable and/or other distribution channels), streaming applications
(via Internet, intranets and/or other networks), other content distribution systems
(pay-audio or audio-on-demand applications and the like) or on physical media
(compact discs, digital versatile discs, semiconductor chips, hard drives, memory cards
and the like). An independent license for such use is required. For details, please visit

http://mp3licensing.com.

36 www.kodak.com/go/support

Index 1

A

about, frame, 17, 19
accessories, 24, 25
automatic on/off, 17, 19, 21

C

cables

power, 2

USB, connecting, 6
camera, connecting, 6
card, memory

copying with, 13

inserting/removing, 5

slot locations, ii
changing picture locations, 8
cleaning frame, 24, 31
clock and timer, setting, 17, 19, 21, 27

copying pictures from, 14
installing, 23

error messages, 28

F

faceplate, 24
firmware

checking version, 17, 19

upgrading, 16, 18, 22, 31
flash drive, connecting, 6
frame, picture

attaching stand, 1

changing orientation, 7

checking model, firmware, serial

number, 17, 19
cleaning, 24
customizing, 24

copying

from computer, 13
from EasyShare software, 14
on frame, 11

D

deleting pictures, 11
displaying slide show, 9
disposal, recycling, 31

E

EasyShare digital display software

copying pictures, 13
installing, 23

EasyShare software

www.kodak.com/go/support 37

setup, 1
specifications, 30
support Web links, 25
troubleshooting, 26
turning on/off, 2

H

help

troubleshooting problems, 26
Web links, 25

home

changing picture locations, 8
screen, 8

Index

I

installing software, 23
internal memory, not available, 30

L

landscape, set orientation, 7, 17, 19
language

setting, 17, 19
setting first time, 4

loading software, 23

M

magnify picture, 10
maintaining frame, 24
matte, 24
memory card. See card, memory
mounting

selecting more than one, 12
sorting, 10
viewing, 8

portrait, set orientation, 7, 17, 19
power

connecting cable, 2
turning on, 2

power button, ii

Q

quick touch borders, 3

R

recycling, disposal, 31
regulatory compliance, 34
reset button, ii

rotate picture, 10
desktop stand, 1
on wall, 7

O

on/off

button, ii
setting automatic, 17, 19, 21

orientation setting, 1, 7, 17, 19

P

P520 frames, settings, 16—17
P720/P820 frames, settings, 18—20
pictures

copying from computer, 13
copying from EasyShare software, 14
copying on frame, 11
deleting, 11
location, changing, 8

running slide show, 9

S

safety information, 31

screen

cleaning, 31
error messages, 28
selecting, 3

selecting

multiple pictures, 12

on screen, 3
serial number, checking, 17, 19
setting

auto on/off, 17, 19, 21

language, 17, 19

language first time, 4

time, 17, 19

viewing options, 17, 19

38 www.kodak.com/go/support

Index

settings

P520 frames, 16—17

P720/P820 frames, 18—20
setup, picture frame, 1
single picture display, 10
slide show

duration, setting, 17, 19

P520 options, 17

P720/P820 options, 20

running, 9

transitions, setting, 17, 19
software

installing, 23

upgrading, 31
sorting by date/filename, 10
source, picture location, 8
specifications, frame, 30

U

upgrading

firmware, 16, 18, 22
firrmware, 31
software, 31

USB device, connecting, 6

V

viewing

full screen picture, 10
pictures, 8
thumbnails, 9

W

wall mounting, 7
warranty, 32
Web links, 25

stand, attaching, 1
support

troubleshooting, 26

Web links, 25

T

thumb drive. See flash drive, 6
thumbnails, 9
time, setting, 17, 19
touch borders, screen, 3
transitions, slide show, 17, 19, 20
troubleshooting

error messages, 28

frame, 26
turning on/off frame, 2

Z

zoom picture, 10

www.kodak.com/go/support 39