
Quick start
1
Charge until the
light stops blinking.
2
3
Set language, date/time.
4
Take pictures, videos.
5
Install software, then share.
Keep learning!
Take and share your
best pictures, videos!
Load the battery.
ENGLISH
www.kodak.com/go/support 1

ENGLISH
Lens
Flash
AF Assist/
Self-timer/
Video light
IR Receiver for
optional remote
control
Shutter button (for pictures)
Power/Battery Charging light
Record Video
Power
Front, top view
See the Extended user guide www.kodak.com/go/m577manuals
See How-To videos www.kodak.com/go/m577demos
2 www.kodak.com/go/support

Share
LCD
Review
Speaker
Tripod
socket
Battery compartment
Slot for MICROSD/SDHC Card
(accessory)
MICROSD/SDHC
Card (accessory)
Strap post
Zoom
Luminance sensor
Micro USB
AV Out
HDMI Out
Side, bottom view
ENGLISH
See the Extended user guide www.kodak.com/go/m577manuals
See How-To videos www.kodak.com/go/m577demos
www.kodak.com/go/support 3

ENGLISH
Swipe
(Drag and quickly release)
Drag or scroll
(Pull down or push up)
Tap
(or tap and hold)
Touchscreen gestures
See the Extended user guide www.kodak.com/go/m577manuals
See How-To videos www.kodak.com/go/m577demos
4 www.kodak.com/go/support

Attach strap, load and charge battery
All batteries lose power over time,
even if they’re not being used. For
longer life, fully charge the battery
prior to use.
ENGLISH
See the Extended user guide www.kodak.com/go/m577manuals
www.kodak.com/go/support 5

ENGLISH
Battery Charging light:
• Blinking: charging
• Steady On: finished charging
Turn off the camera.
1
Connect a KODAK Camera USB Cable,
Micro B / 5-Pin and charger.
2
Maximize the number of pictures you can take. Fully charge the
battery before using. All rechargeable batteries lose power over
time, even if they’re not being used.
If your package includes this charger:
Charging the battery
See the Extended user guide www.kodak.com/go/m577manuals
Watch the battery level See page 12
Purchase extra batteries www.kodak.com/go/accessories
6 www.kodak.com/go/support

1
Battery Charging light:
• Flashing green: charging
• Steady On green: finished charging
2
Charge via your computer’s USB port:
1
2
Battery Charging light:
• Blinking: charging
• Steady On: finished charging
Turn off the camera.
Connect a KODAK Camera USB
Cable, Micro B / 5-Pin.
The camera charges when the computer is on and awake. Turn off the
computer’s hibernation, sleep, and standby modes.
If your package includes this charger:
ENGLISH
www.kodak.com/go/support 7

ENGLISH
Turn off the camera, then open the door.
Insert a card until it clicks. To remove a
card, press and release it.
1
2
Accessory
Use an SD/SDHC Card
Your camera has internal memory. We recommend purchasing a
MICROSD/SDHC Card to store more pictures/videos.
A card can only be inserted one way; forcing it may cause damage.
Inserting or removing a card while the camera is on may damage the
pictures, the card, or the camera.
IMPORTANT:
inserted. If so, new pictures/videos are stored on the card. If no card is
inserted, new pictures/videos are stored in the camera’s internal memory.
If pictures/videos are detected in internal memory and a card is inserted, the
camera prompts you to move the pictures to the card (and erase those in
internal memory).
When you turn on the camera, it checks to see if a card is
See the Extended user guide www.kodak.com/go/m577manuals
Purchase cards www.kodak.com/go/accessories
8 www.kodak.com/go/support

Turn on the camera
Set the language:
Drag or swipe up/down
to view your language.
1
2
Tap your language,
then tap Done.
Set the date and time:
Tap the Month, Date, or Year,
then tap
1
2
Tap the hour or minutes, then
tap
3
Tap Done.
(Tap MDY to change the date
format.)
to change it.
to change it.
Set the language, date/time, sharing
ENGLISH
See the Extended user guide www.kodak.com/go/m577manuals
www.kodak.com/go/support 9