Kodak EasyShare M575 User Manual
Attach the strap, load the battery
KLIC-7006
battery
ENGLISH
www.kodak.com/go/m575support 1
ENGLISH
Battery Charging light:
• Orange: charging
• Green: finished
2
1
2
1
Your plug
may differ.
Turn off the camera.
Connect the KODAK Camera USB Cable, Micro B /
5-Pin and charger. (Use only the cable included
with this camera!)
Battery Charging light:
• Blinking: charging
• Steady: finished
If your package includes a charger:
If your package includes an adapter:
Your adapter
may differ.
Charge the battery
Charge the battery whenever necessary.
2 www.kodak.com/go/easysharecenter
Turn on the camera
to change current field.
for previous/next field.
OK
to accept.
At the prompt, press OK.
to change.
OK
to accept.
Language:
Date/Time:
Set the language and date/time
ENGLISH
See the Extended user guide www.kodak.com/go/m575support
www.kodak.com/go/m575support 3
ENGLISH
The camera turns on in Smart Capture mode.
(If it’s in a different mode, press the Mode button,
then
to choose Smart Capture
Framing
marks
1
2
Press the Shutter button
halfway to focus and set
exposure.
When the framing marks turn
green, press the Shutter button
completely down.
Compose the picture.
3
Mode
button
Then press OK.)
.
Take a picture
See other modes See page 10
See the Extended user guide www.kodak.com/go/m575support
4 www.kodak.com/go/easysharecenter
Review pictures/videos
View previous/
next picture/video.
Press the Review
button to enter/exit
Review.
Play a video.
OK
Review
1
2
ENGLISH
See the Extended user guide www.kodak.com/go/m575support
www.kodak.com/go/m575support 5
ENGLISH
Download software, transfer pictures
When you connect the camera to the computer, it prompts you
to run the KODAK Software Downloader on your computer.
Make sure the computer is connected to the Internet. When
you connect the camera to the computer, the KODAK Software
Downloader automatically runs. Follow the prompts to
download and install KODAK Software.
1 Turn off the camera.
2 Use the KODAK Camera USB
Cable, Micro B / 5-Pin to
connect camera to computer.
(Use only the cable included
with this camera!)
3 Turn on the camera.
4 After the software is
installed, follow the prompts
to transfer pictures and
videos to your computer.
NOTE: If the downloader does not run, find it here and launch it:
■ WINDOWS OS: in My Computer
■ MAC OS: on your Desktop
Download KODAK Software www.kodak.com/go/camerasw
To use this camera on more
than one computer
6 www.kodak.com/go/easysharecenter
See the Extended user guide at
www.kodak.com/go/m575support
Use the camera Help system
Scroll through a
Help topic.
then highlight a menu choice.
Press the Info
1
button.
2
Press the Menu
button
,
Go to www.kodak.com/go/m575support for:
• the Extended user guide
• interactive troubleshooting and repairs
• interactive tutorials
• and more!
ENGLISH
Keep learning about your camera!
See the Extended user guide www.kodak.com/go/m575support
www.kodak.com/go/m575support 7
ENGLISH
Lens
Self-timer/
Video light/
AF Assist Light
Speaker
Microphone
Flash
Front View
8 www.kodak.com/go/easysharecenter
Back View
OK,
Wide Angle/Telephoto
button
Battery compartment
SD/SDHC Card slot
Tripod
socket
LCD
Share button
USB port
Power button
Flash button
Mode button
Shutter button
Delete, Menu,
Info buttons
Strap post
Review
button
ENGLISH
www.kodak.com/go/m575support 9
Loading...