Kodak ESP 3200, ESP 3250, 8946139, ESP 3260 Start Here Manual
Start Here
3200 Series
All-in-One Printer
Back
Home
MS SD/HC MMC
Print Copy Scan
Includes Information on the:
ESP 3250 All-in-One Printer
ESP 3260 All-in-One Printer
Note: A USB 2.0 cable is required to connect
your KODAK All-in-One Printer to your
WINDOWS or MACINTOSH OS Computer.
Available in the KODAK Store or see
your local retailer.
2 www.kodak.com/go/aiosupport
1
Unpacking the Printer
IMPORTANT: To view a setup video for your printer, go to
www.kodak.com/go/inkjetvideo
.
a. Remove all shipping tape from the outside of the printer.
b. Lift the printer access door.
c. Remove all shipping tape and foam pieces from the inside of the
printer.
d. Close the printer access door.
Inkjet Printer Software
FOR WINDOWS & MACINTOSH
Included with your KODAK All-in-One Printer:
Power Cord and Adapter
Printhead
Black & Color Ink
Cartridges
Software CD
MS
SD/HC MMC
Back
H
ome
Printer Access Door
MS SD/HC MMC
Scanner Lid
www.kodak.com/go/aiosupport 3
2
Connecting the Power
a. Connect the:
• power cord to the adapter
• adapter to the printer
• power cord to the power source
Do not connect the USB cable to the printer until
instructed during software install.
b. Remove the plastic film from the LCD.
c. Press ON .
d. Select your language and press OK.
MS SD/HC MMC
Back
Home
MS SD/HC MMC
Back
Home
USB
4 www.kodak.com/go/aiosupport
3
Inserting the Printhead
a. Lift the printer access door.
b. Carefully remove the printhead from its bag.
Do not touch the copper-colored contacts.
c. Remove the two plastic protective shields.
d. Place the printhead into the carriage.
Insert at the angle shown.
e. Push firmly against the target label of the printhead until you hear
a loud snap.
M
S
SD/H
C
M
M
C
Carriage
Loading...