Purchase extra batteries www.kodak.com/go/accessories
Watch the battery levelSee page 6
1www.kodak.com/go/support
Turning on the camera
Press the Power button.
to change current field.
for previous/next field.
OK
to accept.
At the prompt, press
OK.
to change.
OK
to accept.
Language:
Date/Time:
Setting the language and date/time
Setting up your camera
NOTE: To change language in the future, use the Setup Menu (see page 33).
www.kodak.com/go/support
2
Setting up your camera
CAUTION:
1
Turn off the camera.
2
Insert the card until it clicks.
3
Turn on the camera.
To eject the card, push and release it.
SD/SDHC Card
(Accessory)
Storing pictures on an optional SD or SDHC Card
Your camera has internal memory. We strongly recommend purchasing an SD
or SDHC Card to conveniently store more pictures/videos.
A card can only be inserted one way; forcing it may cause damage.
Inserting or removing a card while the camera is on may damage the
pictures, the card, or the camera.
IMPORTANT:
pictures/videos are stored on the card. If no card is inserted, new pictures/videos are stored
in the camera’s internal memory.
If pictures/videos are detected in internal memory and a card is inserted, the camera
prompts you to move the pictures to the card (and erase those in internal memory).
3www.kodak.com/go/support
When you turn on the camera, it checks to see if a card is inserted. If so, new
Purchase accessories www.kodak.com/go/accessories
Mode
Mode
2Taking pictures/videos
Taking pictures
1 The camera turns on in Smart Capture mode.
(If it’s in a different mode, press the Mode button,
then until the LCD displays
mode , then press OK.)
2 Compose the picture.
3 Press the Shutter button halfway to focus and
set exposure. When the framing marks focus on the
desired subject, press the Shutter button
completely down.
Taking a video
1 Press the Mode button, then until the LCD
displays
2 Press the Shutter button completely down,
then release it. To stop recording, press and release
the Shutter button again.
NOTE: Audio is captured during video recording. Audio can be heard
To review and work with videos, see page 19.
Video , then press OK.
when the video is played on a computer or when the camera
is connected to a TV (see page 24).
Smart Capture
www.kodak.com/go/support 4
Taking pictures/videos
Delete the current picture/video
Play/pause a video
While a picture/video is displayed, you may:
Reviewing the picture/video just taken
After you take a picture/video, the LCD briefly displays the picture or the first frame of
a video. (To take new pictures/videos sooner, press the Shutter button halfway.)
NOTE: Audio is captured during video recording. Audio can be heard when the video is played on a
computer or when the camera is connected to a TV (see page 24).
To review pictures/videos, see page 19.
Adjusting LCD brightness
You can adjust the LCD brightness for your environment or to conserve battery power,
see page 33.
5www.kodak.com/go/support
Understanding the picture-taking icons
Battery level
Capture mode
Pictures/time remaining
Zoom indicator
Self timer
Flash mode
Focus mode
Exposure compensation
Keyword tag
Watch the battery level
Don’t miss out on great pictures and videos—keep your battery fully charged.
Full
Three quarters
Half
Critical
AC Power
Taking pictures/videos
Purchase extra batterieswww.kodak.com/go/accessories
www.kodak.com/go/support
6
Taking pictures/videos
Using the optical zoom
1 Use the LCD to frame your subject.
2 To zoom in, press Telephoto (T).
To zoom out, press Wide Angle (W).
3 Take the picture or video.
NOTE: For focus distances, see Specifications starting on page 44.
Using digital zoom
Use digital zoom to get up to 5X magnification beyond optical zoom. (Digital zoom is
not available in Smart Capture mode.) Press Telephoto (T) until the slider on the LCD
is at the end of the optical zoom range. Release Telephoto (T), then press it again.
NOTE: You may notice decreased image quality when using digital zoom.
7www.kodak.com/go/support
Taking pictures/videos
Flash
Using the flash
Press the Flash button repeatedly until the LCD displays the desired flash mode.
Flash modesFlash fires
AutoWhen the lighting conditions require it.
Fill (Flash On)Every time you take a picture, regardless of the lighting
conditions. Use when the subject is in shadow or is “backlit”
(when the light is behind the subject).
NOTE: (Not available in Smart Capture mode.)
OffNever
Red-eye
Reduction
A preflash fires, shrinking the eye pupil, before the picture is
taken.
www.kodak.com/go/support
8
Taking pictures/videos
Mode
P
Using different modes
Press the Mode button, then until the LCD displays the mode that best suits
your subjects and surroundings,
Use this modeFor
Smart
Capture
Scene
Video
ProgramAdvanced picture-taking—gives access to more manual settings
then press OK.
General picture taking—it offers excellent image quality and ease
of use.
■ Faces get focus and exposure priority.
■ The scene is analyzed for other content and for lighting.
You can choose the best picture size and aspect ratio for your
needs—just press the Menu button and choose Picture Size.
■ 3:2 (the best choice when making 4 x 6 prints)
■ 16:9 (wide screen)
■ 4:3 (the default setting)
Point-and-shoot simplicity when taking pictures in practically any
situation. (See page 10.)
Capturing video with sound. (See page 4.)
than Smart Capture.
9www.kodak.com/go/support
Taking pictures/videos
Using Scene (SCN) modes
Choose a Scene mode—for great pictures in practically any situation.
1 Press the Mode button, then until the LCD displays SCN,
2 Press to choose a mode and read its description.
3 Press OK to enter that Scene mode.
SCN mode For
PortraitFull-frame portraits of people.
SportAction pictures.
LandscapeDistant scenes.
Close-upClose range. Use available light instead of flash, if possible.
SunsetSubjects at dusk or dawn.
BacklightSubjects that are in shadow or “backlit.”
Candle LightSubjects illuminated by candle light.
ChildrenAction pictures of children in bright light.
BrightBright scenes.
FireworksFireworks. For best results, place the camera on a steady surface or
tripod.
Night PortraitReduces red eye of people in night scenes or low-light conditions.
Night LandscapeDistant scenes at night. For best results, place the camera on a steady
surface or tripod.
Self PortraitClose-ups of yourself. Assures proper focus and minimizes red eye.
Blur ReductionReducing blur caused by camera shake or subject motion.
High ISOPeople indoors, in low-light scenes.
Panorama L-R, R-L “Stitching” 2 or 3 pictures into 1 panoramic scene. (See page 13.)
then press OK.
www.kodak.com/go/support
10
Taking pictures/videos
Press to show/hide shortcuts.
Shortcuts
Using shortcuts
Your camera has a clean, uncluttered interface. For quick access to the most popular
capture and review functions:
1 Press the Info button.
The shortcuts appear. To hide the shortcuts again, press .
2 Press to access functions like Exposure Compensation, Self-timer, and Auto
focus in Capture mode. In Review mode, access People Tags and Keyword Tags.
(You’ll see different functions in different modes.)
3 Press to choose a setting.
11www.kodak.com/go/support
Taking pictures/videos
2
10
2x
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. For best results, place the camera on a tripod or steady surface.
You can turn on the self-timer using a shortcut (see page 11) or these steps:
1 Press the Menu button. Press to choose Self-timer, then press OK.
2 Press to choose a Self-timer setting:
2 Seconds— A picture is taken after a 2-second delay.
10 Seconds— A picture is taken after a 10-second delay.
2 Picture Timer— The first picture is taken after a 10-second delay. A
second picture is taken 8 seconds later.
3 Compose the scene. Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
To take a video after a 2- or 10-second delay, use the same procedure but press the
Shutter button completely down while in video mode.
Using burst
Use the burst feature to take up to 3 pictures in rapid succession. You can turn on
burst using a shortcut (see page 11) or these steps:
1 Press the Menu button.
2 Press to choose Self-timer/Burst, then press to choose Burst On.
3 Press the Menu button.
4 Compose the scene. Press the Shutter button halfway, then completely down
and hold it.
The camera stops taking pictures when you release the Shutter button, when pictures
are taken, or when there is no more storage space. Burst is unavailable in some modes.
www.kodak.com/go/support
12
Taking pictures/videos
Take
2 or 3
pictures.
Get 1
panoramic
picture.
Taking panoramic pictures
Use panorama to “stitch” up to 3 pictures into a panoramic scene.
NOTE: Only the panoramic picture is saved; individual pictures are not. (Exposure and white balance are set
with the first picture. The flash is set to Off.)
1 Press the Mode button, then until the LCD displays SCN, then press OK.
2 Press to choose Panorama Left-Right or Panorama Right-Left
(depending on the direction you want to pan), then press OK.
3 Take the first picture.
After a quickview, the LCD displays the liveview and an “overlay” from the first picture.
(You can press the Delete button to start over.)
4 Compose the second picture. Make the overlay from the first picture cover the
same portion in the new picture.
5 If you are taking/stitching only 2 pictures, press OK to stitch them together.
After you take 3 pictures, the pictures are automatically stitched together.
NOTE: To use the self-timer 10-second or 2-second setting, see page 12.
13www.kodak.com/go/support
Loading...
+ 45 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.