FCC Compliance and Adviso ry........................................22
Canadian DOC Statem ent.............................................23
VCCI Class B ITE................................................................23
iii
Chapter 1
1Introduction
Congratulations on purchasing the KODAK PALMPIX Camera (PALMPIX
Camera) for the PALM m500 Handheld Series, the camera that turns your
PALM Handheld into a digital c am era. Install the softwar e from th e KODA K
PALMPIX Ca m era CD before you begin us ing your ca m er a .
PALMPIX Features
With the PALMPIX Camera you can:
m Take great looking pictures in three different resolut ions:
800 x 600 (SVGA), 640 x 480 (VGA) or 320 x 240 (1/4 VGA).
m Get close to your subj ect with a 2x digital zoom.
m Focus the camera manually for use in Macro (close-up), Portrait
(mid-range), Landscape (infinity), Busi ness card, and Page settings
m Transf er pictures by PALM HOTSYNC Technology for instant editing,
e-mailing, printing, and placement into documents.
m Transf er pictures to an expansion (MMC/SD) card for storage and use on
other computers.
m Save pictures to a PC in JPEG (.JPG) or Bitmap (.BMP) format; to a
MACINTOSH Computer in JPEG or PICT format.
m Convert 640 x 480 and 320 x 240 pictu res to J PEG format on the PALM
expansion card.
m Beam pictures to other PALM Handheld users.
1
Chapter 1
Camera Overview
Camera Installed on Handheld
Camera lens
Back of
handheld
Camera Viewfinder
(Handheld displ ay)
Zoom
Camera back
Shutter bu tt o n
(Date Book)
2
Camera Front View
Chapter 1
Page mode - use
to photograph a
full page
(approximately
19 inches,
48 cm)
Business card
mode - use to
photograph
business cards(approximately
6 inches,
15 cm)
Portrait - use for
mid-range shots
(2 to 12 feet,
.6 to 3.6 m)
Landscape - use for
full-range shots
(8 feet, 2.4 m or
greater)
Macro - use for
close-ups (4 inches,
10 cm)
Open position - ready
to be connected to
the PALM Handheld
3
Camera Top View
Chapter 1
Latches - use to secure
the cam e ra to the
handheld
4
Chapter 2
2KODAK PALMPIX Camera
Software
On the KODAK PALMPIX Camera CD
The following appli cations are included on the PALMPIX Camera CD, supplied
with your camera. You must install the KODAK PALMPIX Image Capture
Application and PALMPIX Conduit before you can capture images and transfer
them from your PALM Handheld to the computer.
m PALMPIX Image Capture Ap plication —runs on the PALM m500
Handheld Series and controls the camera and picture transfer functions.
m PALMPIX Conduit—is added to the PALM HOTSYNC Manager and lets
you transfer pictures from the PALM Handheld to the computer using
HOTSYNC Technology.
m PALMPIX Demo—runs on your computer to show you the major features
and functions of the camera system.
m PA LMPIX Image Conversion Application—is installed and runs on
your computer. The Image Conversion Appli cat ion enabl es you to convert
PPX images stored on the expansion card into JPEG, BMP, or PICT format
so that you can view them on your computer and share them with people
who don’t have PALM Handhelds.
NOTE: The PPX image format was created to keep PALMPIX image sizes as
small as possible for storage on a memory card while maintaining the
highest image quality.
5
Chapter 2
Before You Begin
Before you install the KODAK PALMPIX Software, make sure you have installed
the PALM Deskto p s o ftware that was provided with your PALM Handheld, and
that you can perform a HOTSYNC operation with the PALM Handheld to your
computer. You cannot install the KOD AK PALMPIX Software unl ess the PALM
Desktop software is installed first.
PALM HOTSYNC Technology
The PALMPIX Conduit uses PALM HOTSYNC Technology to transfer pictures
from the PALM Handheld to your computer. HOTSYNC Software is the program
that ena bles you to synchronize the data on the PALM Handheld with the data
on the computer.
For more information, refer to the guides that came with the PALM Handheld.
6
Chapter 2
Installing the Software
1On your computer, exit all software programs.
2Place the KODAK PALMPIX Camera CD into the CD-ROM drive.
If the CD does not start automatically:
On a PC—from the Start menu, select Run. In the text box, enter the
CD drive letter:\setup.exe. For example, d:\setup. exe.
On a MACINTOSH COMPUTER—click the PALMPIX desktop icon and
open Installer.
3Select your language (if asked), then follow the on-screen instructions to
install the soft ware .
On a PC:
Select the programs to install.
Click Next
7
Chapter 2
On a MACINTOSH Com puter :
Click Switch Disk to select a custom installation directory.
Select the programs
to install.
Click Install.
4Select your PALM Handheld user name (if asked) when prompted.
NOTE: If multiple PALM Handheld users share your compute r, install the
KODAK PALMPIX Software separately for each user, selecting the
appropriate user name when prompted.
5After the software is installed on the computer, perform a HOTSYNC
operation to transfer the PALMPIX Software onto the PALM Handheld.
NOTE: If you have difficulty in stalling the PALMPIX Image Capture Application
on your PALM Handheld, refer to the guides that came with your PALM
Handheld for in structions on insta ll ing applications manually.
8
Chapter 2
Customizing the HOTSYNC Transfer
Settings
From your computer , you can change the following settings that determine how
and where your pictures are saved on your computer:
SettingOptionsSystem Default
HOTSYNC actionHandheld overwrites
desktop
Do nothing
After HOTSYNC
operation
Save Pictures AsPC: JPEG, BMPJPEG
Save Pictures HereOn a PC:
Delete pictures off PDA
Open picture folder
MACINTOSH Comp uter:
JPEG, PICT
C:\KODAK Pictures\
PalmPix\username
C:\Palm\username\
PalmPix
Handheld overwrites
desktop
Not checked
Checked
JPEG
On a PC:
hard drive letter\Kodak
Pictures\PalmPix\user name
User-specifi e d directory
On a MACINTOSH
computer:
KODAK Pictu re Folder
Palm User Directory
User-specified
On a MACINTOSH
Computer:
HD:Kodak
Pictures:PalmPix:username
9
Chapter 2
Changing the Transfer Settings on a P C
1On your computer desktop, right-click the HOTSYNC Manager icon,
located in the System Tray on the WINDOWS desktop. Select Custom to
display the Conduit’s Custom Window.
NOTE: For informati on about the Conduit wi ndows, refer to the guides that
came with the PALM Handheld.
2Select KODAK PALMPIX, then click Change.
3On the Change HotSync Action window, select the desired image transfer
option. Click Advanced.
4In the Advanced PalmPix Actions window, select the options you want, then
click Done.
10
Chapter 2
Changing the Transfer Setting s
on a MACINTOSH Computer
1From the Finder Menu bar, select the PALM Icon.
NOTE: For informati on about the Conduit wi ndows, refer to the guides that
came with the PALM Handheld.
2Select HotSync (with your user name), then Conduit Settings.
3Select KODAK PALMPIX Camera. Click Change Settings.
4Click Advanced. In the Advanced PalmPix Actions windo w, select the
options you want, then click Done.
11
Loading...
+ 39 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.