Koch Custom Cabinet User Manual

Your Custom Cabinet specifications:

Version:
Serial number:
Grill Cloth:
Speakers:
Speaker mounting:
Speaker configuration:
Power handling:

________________________________

____________________________
_______________________________
_______________________________

________________________

_____________________

__________________________

General Custom Cabinet specifications:

* 18mm, 13 ply baltic birch plywood.
* All glued wood-to-wood joints.
* Fixed and sealed back panel for ultimate strength and ruggedness.
* Extra large sized cabinet braced and tuned for the optimum guitar
sound.
* One piece baffle for maximum rigidity.
* High quality hardware used throughout.
* Unique connection and switching options.
* Internal wiring with Koch Dynacon® speaker cable.
* Supplied with a Koch Dynacon® speaker cable for hookup.

www.koch-amps.com

Built by:

Tested by:

Date:

www.koch-amps.com

Always use special speaker cable to connect your amp to this speaker cabinet.

HOW TO CONNECT

Dear Customer,

Thank you for choosing a Custom Cabinet from Koch. These
cabinets have been designed and built by people who, from their own
experience as musicians, take guitar tone very seriously.
Our Custom Cabinets are tuned and optimized for the best tone from
any guitar amplifier. They are constructed with the highest quality
materials available and built to the highest standards.

Besides this we offer a unique choice of options to give each Custom
Cabinet a personal touch. Please take the time to study this connec­tion diagram before you put your cabinet into operation. Also fill in the
warranty card and (e)mail it to us. We hope you will enjoy your new
guitar cabinet and experience a whole new palet of lushful tones.

YOUR CUSTOM CABINET

For optimum performance use the included Koch Dynacon Speaker cable

The Koch team

[e-mail]

Mono

Amplifier

4 ohm

Don’t connect

simultaniously

Mono

Amplifier

16 ohm

www.koch-amps.com

Mono

4 or 16 ohm

(One or) two

seperate

mono

amplifiers

In this Dual Mono mode the
grounds of the (paired) speakers
are fully separated.
This prevents ground loops and
other connection problems in the
speaker circuit. It does not pre­vent ground loops in other parts
of the system.

www.koch-amps.com

Stereo

2 x 8 ohm

Dual Mono

2 x 8 ohm