The faction of LCD is the same as desk-type display; this NETBOOK applied TFT
LCD,
3. Power Switch although it has power-off feature.
To use the power switch button to turn off the machine directly, will cause a certain
degree of damage. Under normal circumstances is not recommended directly by the
power switch button to shut down, if there are special circumstances and can't shut
down normally, carry out this operation.
Power LED When you turn on the power of the computer, this power indicator
light, when the data are saved to memory (pause) mode, the power indicator light
began flashing. When you shut down your computer, the power indicator light
will automatically extinguish.
4. Keyboard
Keyboard equipped with 80 keys, keyboard beneath the sense of space that allows you
to place the wrist or the palm of your hand, increase typing comfort.
5. Touch pad and the left and right buttons
Touch screen and button functions include positioning, selection, drag, click
(left-click or right-click), double-click and scroll, provide the same function as the
desktop mouse.
6. Indicator Status
Battery Charge Indicator The battery charging indicator (LED) display status is
as follows:Lights: Connect AC power supply, the red light means the battery is
charging, red lights went out that the battery is full。
2
WIFI indicator When the blue light is on means the WIFI has been activated
7. Indicator Status
Capitalization Indicator When the light is green, it means that capital letters
feature on the keyboard has been activated. After pressing the button, the output
of the screen will all be capital letters
Num Lock Indicator
USB device Indicator
8. MIC
Built-in microphone hole
Right side:
1. The access hole of Power Supply (DC)
The power adapter change (AC) power directly into current (DC) power, connected to
this jack. You can power your NETBOOK work or recharge your internal battery
pack through this jack. To avoids damaging NETBOOK and battery pack, please
always use the provided power adapter matches.
Note: The use of time is too long may result in high machine temperature, in order
to avoid accidental injury caused by your body, please do not let any part of your
body contact.
2. USB Interface (2.0/1.1)
USB (Universal Serial Bus) port is compatible with USB 2.0 or USB 1.1 devices such
as keyboards, storage devices and so on. USB interface allows many devices to run on
a computer, a number of peripherals plug-ins, or as an additional storage device. In
addition, USB interface supports hot swap capability.
3. HDMI Ports
This device support through the Mini HDMI connected with TV, it makes TV and
device displayed synchronic. For using this feature, insert the Mini HDMI cable into
3
the right side of the device interface to connect with TV.
TV screen adjustment
After connecting HDMI, Enter into Settings→ Display → TV screen adjustment,
by adjusting the drag strips in the interface to change the width and height of the TV
side.
After connecting HDMI, you can press the power button to turn off the screen, In
order to get longer battery life.
4. Headphone output Jack
Stereo headphone jack (3.5 mm) to connect a computer's audio output signal
amplification speakers or headphones. Using this jack automatically disables built-in
speaker.
5.Microphone Jack
The microphone jack to connect a microphone for voice description, or simple
recording.
8-pin RJ -45 LAN port, support the use of a standard Ethernet cable to connect to the
local network. Built-in connectors can be easily used, no additional equipment
4
Back:
1. Audio Speakers
Built-in stereo speaker system, after open the audio or video, you can hear the sound
without the additional equipment. Audio features from the software-controlled,
multi-media sound system with an integrated digital audio controller, resulting in rich,
vibrant sound (improved external stereo headphones or speakers)
2. Battery Box
Power Button Usage
Turn On: Press the power button and hold for 2 seconds.
Turn Off: Press the power button and hold for 2 seconds, →tap Power off→tap OK.
Sleep Mode On/Off: Press & release the power button quickly to turn sleep mode on
and off.
Force Off: If device does not respond, press and hold the power button for 5seconds.
Note: If it is necessary, we don’t suggest use Force Off. You should follow the steps
to perform the shutdown.
Warning: Force off could lead to unpredictable system errors !
Reset Button:
the device, please caution this feature. (
restart, so after reset you need to press the power button to re-boot.)
Press the reset button to reset the device. Reset will erase all data on
Note:
Current the reset function can not be
USB Interface
Insert U-Disk
5
Insert your U-disk into the device. When ready for use, it will directly into the File
Browser to open U disk folder.
Remove U-Disk
Close all applications or documents which have been opened on the U-disk. Tap
When it displayed Mount this device and then you can unplug the U-disk..
Don’t insert and remove the U-disk repeatedly in a short time, as this may cause
damage to the U-disk.
Using micro SD Card
☆The device supports a maximum 32GB micro SD card.
Insert your card into the micro SD slot until it clicks into place.
Remove micro SD Card
Close all applications or documents which have been opened on the card. Tap
→ Settings → Storage →SD card→ Unmount this storage device. When it
displayed Mount this device and then press the card lightly; it is partially ejected
allowing you to pull the card out.
☆Don’t insert and remove the U-disk repeatedly in a short time, as this may cause
damage to the card.
☆We recommend using major brands of memory cards to avoid incompatibility.
Keyboard
Wireless Book was used 80 keys of standard keyboard template.
There are some functions of key combination
Users pressto change Num mode and than they can input The corresponding
number by Num key. Press it again to get back normal mode.
Commonly used buttons:
Esc: Back
Enter: OK
Arrow keys: Corresponds to the direction of(up down left right)
F1: Browser
6
F2: My Music
F3: My Video
F4: My Photo
F5: Calculator
F6: Weather
F7: Backlight +
F8: Backlight F9: Calendar
F10: File Browser
F11: Task Manager
F12: Settings
Touchpad
Touchpad is a mouse device it can be used as a regular mouse. Touch pad buttons on
both sides of the left and right mouse buttons and common features with the same.
Note:
Do not place heavy objects on the touchpad to avoid being scratched or deformed
Getting Started
Charge the device
☆ You cannot charge the battery using the USB cable.
☆ You can use the device while the battery is charging, although the charging time is
longer when operating and charging at the same time.
Plug the power adapter into an electrical wall outlet, and then connect to the device to
fully charge the battery before use (approx. 4hour).
While charging, the battery indicator light is blue. When fully charged, the battery
indicator light is green.
Turn the device on
Press the power button and hold for 2 seconds.
Wi-Fi Network Setup
Since many features require a Wi-Fi connection, we recommend you set up your
Wi-Fi network now.
1. Tap → Settings.
2. Slide Wi-Fi switch to turn on. The device automatically scans and lists all local
Wi-Fi Network found. A lockindicates secure Wi-Fi networks that require input
7
password to connect.
3. Tap the desired network to which you want to connect → enter the Network
Password if applicable → tap Connect
4. Tap to return to the Desktop screen.
☆If your Wi-Fi network is set as hidden, it won’t be found by the auto scan. Tap
Add Wi-Fi network and follow the prompts to add your network.
HDMI Video Play
This device support through the Mini HDMI connected with TV, it makes TV and
device displayed synchronic. For using this feature, insert the Mini HDMI cable into
the right side of the device interface to connect with TV.
TV screen adjustment
After connecting HDMI, Enter into Settings→ Display → TV screen adjustment,
by adjusting the drag strips in the interface to change the width and height of the TV
side.
☆ After connecting HDMI, you can press the power button to turn off the screen, In
order to get longer battery life.
Desktop
1 Back s
2 Home
3 Recent Apps
4 Hide Status Bar
8
5 Menu
6 Current Time
7 Screen Capture
8 Volume
9 Wireless Network
10 Battery Status
11 Google Search
12 Voice Search
13 Add Widgets/Apps shortcuts or setting wallpapers and more
14 Tap to view the applications screen
Through add icon or in the desktop make two points to zoom in the
interface can make many personalized operation, such as, add widgets,
application shortcuts, set wallpaper, add bookmarks, email accounts and set up
the shortcut..
☆ Tap on any application icon to launch it.
☆ Touch, hold and then slide icons to reposition then on the screen.
☆ Touch, hold and slide icons onto to remove them from the Desktop
screen
Screen Lock
Can be set to automatically lock screen or quickly press the power button to
manually lock screen. The system provides four lock screen style for users. You
can enter Settings → Security →Lock Screen to switch.
Lock screen displays the following:
9
Tap the unlock icon and drop it to the right and out of the circle to unlock.
Weather
Set up the degree of temperature, weather auto-refresh rate, add
city and view the city’s weather.
Clock
It can display the time and set the alarm.
App Market
Downloaded applications quickly & easily.
Browser
Access internet.
Calendar
Calendar.
Camera
Take normal photos, panoramic photos and take video.
Calculator
Do calculation.
Email
Send/Receive email using your existing email addresses.
File Browser
File manager application for viewing and managing files and apps.
Use to install Android apps, and to backup files to your SD card.
My Music
Play and manage audio files.
My Video
Play and manage video files.
My Photo
View and manage photo files.
Pre-loaded Applications
Loading...
+ 24 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.