KOCASO M1052 User Manual

Catalogue

Specifications....................................................................................... 1

What’s Inside The box ....................................................................... 1

Tablet Parts ......................................................................................... 2

Getting Started.................................................................................... 3

Connection to Internet ....................................................................... 6

Task Bar .............................................................................................. 9

Install and Uninstall ......................................................................... 10

Camera .............................................................................................. 11

HDMI ................................................................................................. 13

Trouble Shooting .............................................................................. 13

AppendixⅠ Frequently Asked Questions ..................................... 16

AppendixⅡ 3G Support List .......................................................... 19

I

Specifications

Display: 10.1 inches 1024X600 Resolution Resistive Screen
CPU: Boxchip A10
RAM: 1GB DDR
Internal Storage: 4GB
Expansion Memory: USB & TF card, 32GB Max.
Built-In Wireless: 802.11b/g/n
AC Adapter: DC 5V-2A
Operating System: Android 4.0
Battery: 5000mAh

What’s Inside The box

Tablet – 1pc
Power Adapter -1pc
USB Cable -1pc
Earphone -1pc
OTG Cable -1pc
Car Charger – 1pc
User Manual -1pc

1

Tablet Parts

2

Getting Started

Battery Charging

The tablet has a built-in rechargeable Li-polymer battery.

1. To charge connect the AC power adapter to the DC jack on the

right side of the tablet.

2. The LED indicator will illuminate to show the battery is charging.

The LED indicator will turn “OFF” when it’s fully charged.

3. The tablet can be used even if the battery is being charged.

Power ON/OFF

ON:

1. Press and hold the power button until the tablet turns “ON”.
OFF:

1. Press and hold the power button until device optional

2. Select power off

3. Select OK to power off the tablet
Screen Lock/Unlock:
This feature locks the screen, at the same time turn OFF the screen’s
backlight after a few seconds.
Screen locks when:

1. System is idle.

2. Manually activated by pressing the Power button once.

How to Use TF card

1. Insert the TF card into the TF card slot. Gently push TF card into

3

slot until it clicks into place.

2. A prompt will be seen on the screen saying “ Preparing SD card “

Removing TF card

1. Close all applications and documents which have been opened

from the TF card.

2. Select “Setting” and find “Storage” then click “Unmount SD

card”.

3. A prompt will be seen on the screen saying “ SD card safe to

remove”

4. Gently press the TF card to remove and pull out the TF card.

Note: Insert the TF card in correct position, otherwise it will damage
the card and the slot.

Software Keyboard

The tablet has a software keyboard which automatically shows up
when you tap the place on screen where text or number are to be
entered.

USB Keyboard

The unit support external USB keyboard to input text and number.
Some buttons on the unit and some function keys on keyboard may
not work if an external USB keyboard was connected.

Note: when connect an extra USB keyboard, please put the switch to
HOST status.

4

Touch Screen

The touch screen responds to finger touch as well as the stylus
(touch pen) included with the device.

Note: don’t place any object on the touch screen for it may damage or

crush the screen.

Single Click: single click one icon to choose the icon or option you
want.
Long Press: press and hold one icon to choose the icon and you can
drag it to the bottom shortcut bar.
Drag: drag on the screen and you can move between magic cube sides
or drag the application icons into the shortcut bar.

USB Mouse

The device supports external USB mouse. Connect an USB

mouse and you can single click, choose, drag, slide and right click.

Note: when connect an extra USB keyboard, please put the switch to
HOST status.

How to connect with computer

Note: first should put the switch to Device status,

Before transporting documents, firstly you must set store mode for

your MID.

1. Use USB cable to connect MID with computer. Notice bar will

5

appear notice cue.

2. Press Menu button to pop up Menu option, and click on Notice.

3. In the notification panel, click on the USB connection, then click
Loading USB Storage Device.

4. Then the USB connection has been successfully.

Connection to Internet

Ethernet:

1. Connect the Ethernet cable to the Ethernet port of the tablet.

6