Kobold DSF26 Specifications

Flow
Pressure
Level
Temperature

measurement
monitoring
control

Visit KOBOLD Online at

www.kobold.com

KOBOLD Instruments Inc.
1801 Parkway View Drive
USA- Pittsburgh, PA 15205

☎

[phone]
Fax [phone]
E-mail: [e-mail]

USA

CANADA

KOBOLD Instruments Canada Inc.
9A Aviation
Pointe-Claire, QC H9R 4Z2

☎

[phone]
Fax [phone]
E-mail: [e-mail]

P1

DSF26
DIGITAL PRESSURE GAUGE
WITH ANALOG OUTPUT

Model:

DSF26

●

Bright Green LED Pressure Readout

●

High-Contrast, Backlit LCD Readout
for Switch Settings

●

Pressures to 5,800 PSIG

●

Analog Output Standard

●

Durable Piezoresistive Technology

●

Up to Four SPDT Switches Available

●

316-Ti SS, Sapphire & Viton®
Wetted Parts

r1_2-16

DSF26 - Digital Pressure Gauge w/ Analog Output

KOBOLD DSF26 Digital Pressure Gauge

Specifications

Ranges: –14.7 to 5,800 PSI

(see table)

Over Pressure Protection

To 3,000 PSIG: x 2 range max.
Above 3,000 PSIG: x 1.5 range max.

Sensor Type: Ceramic

Piezoresistive

Accuracy: ±0.5% FS ± 1 digit
Linearity: ±0.2% FS
Repeatability: ±0.1% FS ± 1 digit
Response Time: 0.1 to 99.99 sec.

(factory set)

Operating Temperature

Medium: –5°F to 220°F
Ambient: –5°F to 140°F
Storage: –40°to 160°F

Temperature Drift Coefficients

Zero: < 0.05% FS/°F
Span: < 0.05% FS/°F

Displays

Pressure:

4 digit,1/2”

green LED

Switches: 4 digit backlit LCD

Materials of Construction

Wetted Parts: 316-Ti SS, Viton®

Sapphire

Housing: 304 SS, Nylon®

Electrical Information

Supply: 15–30 VDC

Analog Output

Turn Down:
Current:

Voltage:

Zero Adjust:

Relays

Type:
Setpoints:
Hysteresis:
Switch Delay: 0.02 to 99.99 sec.

(factory set)

Max. Voltage: 250 VAC, 220 VDC
Max. Current: 3 A

Max. Power:
Connections:
Protection:

Features

● Bright Green LED Pressure Readout

● High-Contrast, Backlit LCD Readout for

Switch Settings

● Pressures to 5,800 PSIG

● Analog Output Standard

● Durable Piezoresistive Technology

● Up to Four SPDT Switches Available

● 316-Ti SS, Sapphire & Viton®

Wetted Parts

Subject to change without prior notice.

KOBOLD electronic pressure gauges
offer the convenience of an easy to read
local indicating digital display, coupled
with output and contr
found only in two-piece pressure sensing
systems. In addition to its large
green LED pressure display and analog
outputs, the DSF26 provides the user with
a choice of two or four keypad settable
SPDT relays with programmable setpoint
and hysteresis. Annunciation of the switch
parameters is achieved via two
backlit LCD readouts. All this comes in a
standard 100 mm (4 inch) dial gauge
style housing ... a perfect replacement for
existing equipment in need of upgrade.

The DSF26 digital pressure gauges feature
stainless steel construction for superb
chemical and corrosion resistance. This
rugged design enables the DSF26 to
measure pressures up to 5,800 PSIG.

The KOBOLD DSF26 comes standard with

a local LED digital display, analog signal
output and setpoint relays as standard...ideal

for remote monitoring. The SPDT relays are

offered in pairs of either two or four switches.
Setpoints and switch hysteresis are easily

adjustable via the front keypad.

ol features typically

1

/2” tall

1

/4” tall

A

@ 1

5:1
0-20 mA, 4–20 mA,
3-wire into

500 Ω max.

0–10 VDC, 3-wire

into 500 Ω min.

±25% of full scale

SPDT, Qty. 2 or 4
fully adjustable
fully adjustable

50 VA, 60 W

Terminal Block

IP65

r1_2-16