Kobold DPM Specifications

Pelton Wheel Flow Sensor
measuring
monitoring
analyzing
DPM
Flow Range: 0.24...4.8 GPH to 0.8...80 GPH
Brass or Stainless Steel Bodies
Frequency Pulse or 4-20 mA Outputs
Long-Life Sapphire Axle/Bearing Assembly
Compact Design
KOBOLD companies worldwide:
ARGENTINA, AUSTRALIA, AUSTRIA, BELGIUM, BULGARIA, CANADA, CHILE, CHINA, COLOMBIA, CZECH REPUBLIC, EGYPT, FRANCE, GERMANY, HUNGARY, INDIA, INDONESIA, ITALY, MALAYSIA, MEXICO, NETHERLANDS, PERU, POLAND, REPUBLIC OF KOREA, ROMANIA, SINGAPORE, SPAIN, SWITZERLAND, TAIWAN, THAILAND, TUNISIA, TURKEY, UNITED KINGDOM, USA, VIETNAM
01/09-19-2018
KOBOLD Instruments, Inc. 1801 Parkway View Drive Pittsburgh, PA 15205
Main Ofce:
1.800.998.1020
Pelton Wheel Flow Sensor Model DPM
Description
The DPM Series flow sensor uses the pelton wheel principle to measure the flow of water and water-based, low-viscosity liquids that are optically transparent. Liquid passes through a nozzle at the inlet of the flow body and is precisely directed onto a flat-blade pelton turbine. The flow sensor’s pelton turbine wheel rotates at a speed proportional to flow rate. The movement of the pelton wheel is detected optically, and the signal from the optical sensor is processed as an amplified pulse or 4-20 mA signal, both of which are proportional to flow rate. In addition to the DPM Series pelton wheel flow sensor’s compact design, the inlet flow is redirected via a nozzle; therefore, no inlet or outlet straight piping is required and allows the unit to be mounted in any orientation with the axle remaining in the horizontal plane. These features make the DPM Series flow sensor ideal for mounting in locations where space is tight.
Specifications
Accuracy
DPM..K000 & DPM..F300: ±2.5% of f. s. DPM..L, DPM..C & DPM..Z: ±1.5% of f. s. Maximum Pressure: 230 PSIG Operating Temperature: -10...176 °F Electrical Protection: IP 65
Materials of Construction Housing: 316L SS or Ni-Plated Brass depending on model number Nozzle: 316L SS Axle/Bearing: Sapphire Pelton Wheel: Polypropylene Receiver: Polysulfone O-ring: NBR for Brass housings, FKM for 316L SS housings
Electrical Specifications
Frequency Output Output Type DPM..K000: NPN, open collector, 10 mA max. DPM..F300: PNP, open collector, 25 mA max. Input Power DPM..F300: 24 VDC ±20% DPM..K000: 4.5-12 V Frequency Range: Based on model number
2
DC
www.koboldusa.com
Electrical Connection DPM..K000: 5 ft. PVC cable DPM..F300: Micro-DC plug, 4-pin male 4-20 mA Output Output Type: 4-20 mA, 3-wire Max. Loop Load: 500 ohms Power Requirement: ±24 VDC 20% Electrical Protection: IP 65 Electrical Connection: Micro-DC plug, 4-pin male or DIN 43650 (Hirschmann) plug Compact Electronics Output Types: Analog output with 1 open collector switch or 2 open collector switches Analog Output: 4-20 mA, 3-wire RL<500 ohms Switch Type: PNP open collector based on ordering code Switch Rating: 300 mA Max. short circuit protected Power Requirement: 24 VDC ±20% Display Type: 3 digit LED User Programmable Functions: Transmitter span, switch setpoint, lockout code Housing: 304 SS Electrical Connection: M-12 Micro-DC plug, 5-pin male
No responsibility taken for errors;
subject to change without prior notice.
Order Details (Example: DPM-1170 N1 K000)
4.46"
D
M12x1
4.46"
0.51"0.49"
D
1.25"
1.57"
M4
M12x1
3.11"
D
3.11"
0.51"
0.49"
D
M4
1.25"
1.57"
Pelton Wheel Flow Sensor Model DPM
Range
Water [GPH]
Approx
Frequency
[Hz] at
Max Flow
DP at
Max. Flow
[PSI]
Housing Material
Brass 316L SS
Fitting
Size
Output/Electronics
0.24...4.8 165 13.5 DPM-1153.. DPM-1553..
0.8...11.1 228 16.8 DPM-1157.. DPM-1557..
..K000 = OEM Frequency Output with 5 ft. PVC Cable
..F300 = Frequency Output Micro-DC Plug
0.8...15 217 17.7 DPM-1160.. DPM-1560..
..N1.. = 1/8" NPT
..L343 = 4-20 mA, 3-Wire Output with Micro-DC Plug
..N2.. = 1/4" NPT
0.8...30 344 13.2 DPM-1170.. DPM-1570..
..L443 = 4-20 mA, 3-Wire Output with DIN 43650 Plug
..G1.. = G 1/8
0.8...48 372 8.8 DPM-1180.. DPM-1580..
..G2.. = G 1/4
..C34P* = Compact Electronics, 4-20 mA , 1 PNP Switch
..C30R* = Compact Electronics, 2 PNP Switches
0.8...60 415 8.3 DPM-1190.. DPM-1590.. ..Z340* = Analog Indicator + 4-20 mA, 3-Wire
0.8...80 439 8.3 DPM-1195.. DPM-1595..
Accessories: Part Number 807.037 = Mating 4 pin Micro-DC connector with 6 ft. cable for output ..F300 & ..L343 Part Number 807.007 = Mating 5 pin Micro-DC connector with 6 ft. cable for output ..C34P, ..C30R & ..Z340
* Please specify flow direction when ordering
Plug-On Display: for Model DPM-..L443 (4-20 mA Output, DIN Plug Connector)
4-Digit LED, Plug Connector DIN 43 650, 3-wire, Power Supply Via Analog Output AUF-3000
Dimensions
DPM with Frequency Output (..K000)
M4
1.25"
Description Model Number
DPM with Micro-DC Plug (..F300, ..L343)
M4
0.51"
0.49"
0.51"0.49"
1.25"
No responsibility taken for errors; subject to change without prior notice.
www.koboldusa.com
3
Pelton Wheel Flow Sensor Model DPM
6,6
73
D
Dimensions
DPM with Compact Electronic (..C30R, ..C34P) DPM with ..L443 Output (Shown with AUF-3000 Display)
168
DPM with Analog Output and Pointer Indicator (..Z340)
M12x1
161
Ø 79,7
M4
13
32
12,5
11,5
40
M4
D
32
40
4
13
12,5
www.koboldusa.com
No responsibility taken for errors;
subject to change without prior notice.
Loading...