Kobold DOM User Manual
DOM - Positive Displacement Flowmeter
DOM Series Flowmeters
Customer Name: __________________________________________
Application Guide
Rev 06/2010
Company Name: __________________________________________
Phone: __________________________________________________
FAX to:
KOBOLD Instruments Inc.
Fax: ____________________________________________________
412-788-4890 (USA)
514-428-8899 (Canada)
E-mail: __________________________________________________
Design Conditions List Design Conditions
Accurate design pressure and temperature
are essential to ensure the fl owmeter will 1. Pressure: Maximum ____________ PSIG
be built to operate without damage. Please
fi ll out accurately and completely. 2. Temperature: Maximum _________ °F
Process Conditions
1. Type of Liquid: ______________________________ 4. Desired Measuring Range: _______________GPM
2. Normal Operating Temperature: _________________°F 5. Maximum Liquid Viscosity: _______________
3. Line Size: __________________________________
Body Material
Aluminum 316L SS Hi-Pressure 316L SS Ductile Iron
O-ring Material
FKM (standard) EPDM PTFE coated FKM NBR
Fittings
NPT Thread 150LB Flange Other (Specify) __________________________
Output/Display Options
H0 = Dual Pulse, reed & NPN B1 = Batch Controller
Z1 = Dual totalizer D0 = Quadrature NPN
Z3 = Ratemeter/Totalizer M2 = 3-digit Mechanical Totalizer (GPM)
Z5 = Dual LCD Totalizer/Rate M4 = 4-digit Mechanical Totalizer (GPM)
Other Options
S = High-viscosity rotors C = Cooling fi n for LCD displays Special requirement
(not available on all models) (250 °F rating) Specify below:
______________________________________________________________________________________________
www.koboldusa.com
No responsibility taken for errors;
subject to change without prior notice.
03 - 2011
Loading...